• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.125-132
• /
• 2015

PCI Express is high-speed point-to-point serial protocol, the system is designed by analysing loss and jitter through Eye Diagram. It is necessarily analyzing high speed serial signals when the PCI Express Gen3 which has 8Gbps physical signal speed is designed especially. This paper deals with topology extraction, channel analysis, extraction of s-parameters and system signal integrity simulation within transceiver buffer models through PCI Express Gen3 server connecting switch system design. Optimal parameters of transmitter buffer equalizer are found through solution space simulation of de-emphasis and preshoot parameters to compensate channel loss.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.1
• /
• pp.61-70
• /
• 1996

M-ary differential phase shift keying(DPSK)is a bandwidth efficient digital modulation technique and recently has attracted increased attention in mobile satellite communication application where the available radio bandwidth is limited. Coherent detection offers good BER performance in AWGN channel. However, it requires long acquisition times in fading environment. In this paper, we analyze the BER performance of M-ary DPSK signal using the Multiple Differ- ential Feedback Detection(MDFD) technique in Rician fading and shadowed Rician fading channel. MDFD is an efficient scheme to decrease the performance gap between differential and coherent reception by increasing the complexity of the conventional differential receiver to some extent. Compared to the multiple symbol maximum likelihood detection technique, the multiple differential feedback detection technique has a much simpler structure for hardware implementation. Espe- cially, this technique has application to land mobile satellite channel which can vary in time and space between AWGN and rapidly fading channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.366-372
• /
• 2017

In this paper, the analysis of baluns that are inevitably required to design a differential low noise amplifier, The balun converts a single signal input from the antenna into a differential signal, which serves as an input to the differential amplifier. In addition, it protects the circuit from ESD(Electrostatic Discharge) coming through the antenna and helps with input matching. However, in the case of a passive balun used in general, since the AC signal is transmitted through electromagnetic coupling formed between two metal lines, it not only has loss without gain but also has the greatest influence on the total noise figure of the receiving end. Therefore, the design of a balun in a low-noise amplifier is very important, and it is important to design a balun in consideration of line width, line spacing, winding, radius, and layout symmetry that are necessary. In this paper, the factors to be considered for improving the quality factor of balun are summarized, and the tendency of variation of resistance, inductance, and capacitance of the balun according to design element change is analyzed. Based on the analysis results, it is proved that the design of input balun allows the design of low noise, high gain differential amplifier with gain of 24 dB and noise figure of 2.51 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10C
• /
• pp.1017-1026
• /
• 2005

In burst OFDM system, the frame synchronization should be performed first for the acquisition of received frame and the estimation of the correct FFT-window position. The conventional frame synchronization algorithms using design features of the preamble symbol, the repetition pattern of the OFDM symbol by pilot sub-carrier allocation rule and Cyclic Prefix(CP), has difficulty in the detection of precise frame timing because its correlation characteristics would increase and decrease gradually. Also, the algorithm based on the correlation between the reference signal and the received signal has performance degradation due to frequency offset. Therefore, we adopt a differential correlation method that is robust to frequency offset and has the clear peak value at the correct frame timing for frame synchronization. However, performance improvement is essential for differential correlation methods, since it usually shows multiple peak values due to the repetition pattern. In this paper, we propose an enhanced frame synchronization algorithm based on the differential correlation method that shows a clear single peak value by using differential correlation between samples of identical repeating pattern. We also introduce a normalization scheme which normalizes the result of differential correlation with signal power to reduce the frame timing error in the high speed mobile channel environments.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1048-1051
• /
• 1997

본 논문에서는 GPS 수신기를 이용하여 송전선 양단에 설치되어 있는 전류차동계전기들의 전류샘플링을 동기시키는 방법을 제안하고, 이를 이용한 전류샘플링 동기장치의 개발에 대해 설명 한다. 송전선 양단의 GPS 수신기들에서 만들어지는 서로 동기된 IPPS신호들을 이용해 샘플링 동기신호를 만들어 주고, 이를 이용해서 서로 동기된 전류샘플링이 적당한 계수값 지정과 함께 이루어지도록 A/D변환기와 메모리 그리고 프로그램형 논리 소자를 사용한다. 샘플링 동기신호를 만들어주기 위해서 GPS수신기와 10MHz발진기를 이용한 디지털 위상잠금회로(DPLL, Digital Phase- Locked Loop)를 구성 한다. 본 논문에서 제안하는 전류샘플링 동기방식은 통신을 이용한 기존의 방식에 비해 계전기의 계산부담을 덜어주고 보다 정확한 샘플링 동기를 얻을 수 있게 한다.

• The Journal of Natural Sciences
• /
• v.12 no.1
• /
• pp.49-59
• /
• 2002

Exponential decrease of saturation absorption signal was reported in pump beam spacially keeping off from probe beam. Optimum angle between pump beam and probe beam in the differential-velocity-selective saturation absorption spectroscopy was computed theoretically, $1.33^{\circ}$ in cesium atoms and $1.08^{\circ}$ in Rb 87 atoms, and was good agreement with the experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.599-604
• /
• 2002

In this paper, a digital potentiometer is used as a load resistor of a wireless optical differential detector with a polarizer, to improve the noise reduction capability. In this structure, the noise voltages of the two photodiodes are made equal by controlling a digital potentiometer and the optical noise is cancelled out. With a digital potentiometer, the signal to noise ratio is enhanced by about 23 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.96-102
• /
• 2004

In this paper, optical noise is reduced by a differential detector, which is composed of a beam splitter and two photodiodes whose spectral responses are different each other. In this configuration, the automatic gain control circuit is not required for noise cancellation because the noise intensities at the two photodiodes are kept equal by a beam splitter. The signal to noise ratio in a differential detector with a beam splitter was improved to be 14 ㏈ higher than in a single photodiode with optical filtering.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.591-601
• /
• 1993

In this paper, the relationship between k consecutive outputs of the conventional differential detector and output of differential detector with k-bit delayer MSK and GMSK signal, using a k-bit delay circuit, is the product of k successive output of the conventional differential detector. This relationships are used to generalize the structure of receiver which was proposed by Makrakis using 2-bit delay line. The error rate performance of the proposed method is carried out by computer simulation and significant performance improvement is achieved for differential MSK and GMSK system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.705-708
• /
• 2010

Recently, HSRC (Half-Symbol-Rate-Carrier) OQPSK (Offset Quadrature Phase Shift Keying) signaling which reduces the bandwidth of transmitted signal for high-speed data communications has been introduced. Since the signal is based on QPSK modulation, it also has the characteristics of QPSK signal. This paper introduces architectures of the transceiver using differential coding to resolve the 4-phase ambiguity problem of the HSRC-QOPSK signaling for high-speed data communications. In addition, this paper proves the functionality of the transceiver with differential coding and shows the BER (bit-error-rate) performance of the transceiver by simulations.