• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.29-42
• /
• 1990

In this paper, We use the APL as IDL when simulation a 16-bit SIP. It was possible for IDL to represent and describe a structure of a H/W which other HDL have not. Because We partitioned whole system to various modules when desingning processor, We adpoted a direct decoding method. A designed each modules are executed according to 12-bit control word was inputed through experimental framework, Which were composed to symbolized instructions. In here, By setting instruction codes of the SIP using binary code, We composed instruction format and assembler instruction, and verified the SIP behaviour that try to implement by entering a presented instruction set through experimental framework. In a presented SIP, Because inputing program are a symbolized language, Designer and user will easily understand behaviour of system. Especially, Because we can immediatly specify a unit function within SIP, We will use variously and easily the library cell.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.12
• /
• pp.1121-1126
• /
• 2010

This study is to investigate the effects of aromatics and T90 for low cetane number (CN) fuels on combustion and exhaust emissions in low-temperature diesel combustion. We use a 1.9-L common rail direct injection diesel engine at 1500 rpm and 2.6 bar BMEP. Low temperature diesel combustion was achieved via a high external EGR rate and strategic injection control. The tested fuels four sets: the aromatic content was 20% (A20) or 45% (A45) and the T90 temperature was $270^{\circ}C$ (T270) or $340^{\circ}C$ (T340) with CN 30. Given the engine operating conditions, the T90 was the stronger factor on the ignition delay time, resulting in a longer ignition delay time for higher T90 fuels. All the fuels produced nearly zero PM because of the extension of the ignition delay time induced by the low cetane number. The aromatic content was the main factor that affected the NOx and the NOx increased with the aromatic content.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.120-127
• /
• 2008

HMIPv6 draws lots of attentions in recent years for providing an efficient handover and reducing the signaling overhead. HMIPv6 employs MAP(Mobility Anchor Point) in order to minimize a signaling overhead and a local mobility management. MAP completes an efficient mobility management in HMIPv6 network environment with frequent handover. However, HMIPv6 causes load concentration at a paricular MAP and may have unnecessary latency between HN(Mobile Node) and CN(Correspondent Node) within the same network. A MAP may also disturb the route optimization in HMIPv6 network because all packets must be transmitted through a MAP. In this paper, we propose a scheme to optimize the route in HMIPv6 networks according to MAP load. We configure a threshold in order to support the better service into MAP domain. The packets do not pass through MAP and are directly transmitted to AR(Access Router) if the number of current MNs attached to the MAP exceed the desired threshold. We simulate the performance of the proposed scheme and compare with HMIPv6. Resultly, the proposed scheme reduces signaling costs and mitigates concentration of a paticular MAP as well.

• The Journal of Korean Association of Computer Education
• /
• v.18 no.2
• /
• pp.21-33
• /
• 2015

This paper aims at developing IT convergence robot education contents using open hardware-based GoGo Board and presenting three cases that were applied into educational settings with elementary and middle school students. Several types of data for their activities were collected: photos, work output, survey data, video data and interview with robot teacher and students. Each student experienced building up a GoGo Bumper Car with touch sensors attached at front and back sides and figuring out the principle of digital board control and operating of electronic devices by sensing. The participants, in the following phases, conducted domino chain-reaction with GoGo Bumper Cars and acquiring GoGo Driving Licence by driving test on three different road maps. Students in a gifted education program creatively implemented their own ideas as part of robotic art. The result of case analysis showed that the proposed project provides students not only intimacy for technology, fun, concentration but her own empowerment for developing ideas and creative implementation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.27.1-27.1
• /
• 2009

Chalcopyrite구조의CIS 화합물은 직접천이형 반도체로서 높은 광흡수 계수 ($1\times10^5\;cm^{-1}$)와 밴드갭 조절의 용이성 및 열적 안정성 등으로 인해 고효율 박막 태양전지용 광흡수층 재료로 많은 관심을 끌고 있다. CIS 계 물질에 속하는 $Cu(InGa)Se_2$ (CIGS) 태양전지의 경우 박막 태양전지 중 세계 최고 효율인 20%를 달성한 바 있으며, 이는 기존 다결정 웨이퍼형 실리콘 태양전지의 효율에 근접하는 수치이다. 그러나 이러한 우수한 효율에도 불구하고 박막 증착시 동시증발장치 혹은 스퍼터링장치와 같은 고가 진공장비를 사용하게 되면 공정단가가 높을 뿐만 아니라 사용되는 재료의 20-50%의 손실을 감수해야만 한다. 또한 대면적 Cell제작에 어려움이 있기 때문에 기술개발 이후의 상용화 단계를 고려할 때 광흡수층 박막 제조 공정단가를 획기적으로 낮출 수 있고 대면적화가 용이한 신 공정 개발이 필수적이다. 이러한 관점에서 비진공 코팅방법에 의한 CIS 광흡수층 제조 기술은 CIS 태양전지의 저가화 및 대면적화를 가능케 하는 차세대 기술로 인식되고 있고 최근 급속한 발전을 이루고 있는 미세 입자 합성, 제어 및 응용 기술에 부합하여 많은 세계 연구기관 및 기업체에서 활발히 연구를 진행하고 있다. 비진공 방식에 의한 CIS 광흡수층 제조 기술은 전구체 물질의 형태에 따라 크게 입자형 전구체를 사용하는 방법과 용액 전구체를 사용하는 방법으로 나눌 수 있다. 본 연구에서는 용액 전구체를 paste 공정으로 실험하였다. 이는 용액전구체 물질 제조가 입자형 전구체 제조에 비해 매우 간단하고, 전구체 물질 내 구성원소의 원자비를 쉽게 조절할 수 있다는 장점 및 사용효율이 높아 소량의 source로도 박막 제작이 가능해 공정 단가 절감에 큰 효과가 기대되기 때문이다. 실험에 사용 된 용액전구체는 $Cu(NO_3)$ 및 $InCl_3$, $Ga(NO_3)$를 Cu, In, Ga 출발 물질로 선정하여 이를 메탄올에 완전히 용해시켜 binder인 셀룰로오즈와 메탄올을 섞은 용액과 혼합하여 전구체 슬러리를 형성하였다. 이 슬러리를 paste공정으로 precursor막을 입히고 저온 건조 후 Se 분위기에서 열처리하여 CIGS박막을 얻을 수 있었다. 박막의 특성을 XRD, SEM, AES, TGA등으로 분석하였다.

• Journal of Wetlands Research
• /
• v.7 no.3
• /
• pp.67-73
• /
• 2005

At research, the river's water which the sewage treatment facility will ask growth suppression the algae in the artificial rivers which it is using or it researched the method for the removal of the algae which grew. At results, when 60ppm of Chlorine was put in, the possibility of getting the result where 90% chlorophyll-a was removed and LC50 was 0.8ppm. The algae did not create even after 20days by which uses prevent agent of creation of the algae. Controlling the chlorine almost there was not an extinction effect of the algae which was already in large quantities multiplied, with in the effect against an water ecosystem widely known it is not. The prevent agent could inhibit creation of the algae, but it was judged with the fact that the methods are directly applied to the field must be researched continuously.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.4
• /
• pp.11-18
• /
• 2017

The Objective of this Study is to Prove the Effectiveness of a Smart Water Management(SWM) Technology. The SWM Technology can Reduce the Production Cost using Internet of Thing(IoT) Technology that Utilizes Remote Metering of Consumer's Water usage and Reduce the Leakage of Supply Facilities. The SWM Demonstration Model Installed a Remote Water Leakage Sensor, Smart Metering and Micro Multi Sensor in Water Supply Facility, and Provided Real-Time Monitoring of the Operation Status. Consumers can be Provided the usage of Tap Water and the Water Puality through a Smart Phone Application. At this Time, we Surveyed Whether Consumers save the Tap Water or Drinking Directly using the Tap Water usage Information. Also, this Study is to Verify the Degree of Improvement of Water Supply Rates and Drinking Water Rate, and to Decrease Consumer's Complaints, Operating Costs, and Water Consumption by the SWM Technology. It is also Established a SWM Model Combined with the IoT Sensor at Supply Facilities, operator monitoring system and explored recovery solution detected events. It means the upbringing of the domestic water industry by developing the related technologies and spreading the SWM to advanced levels.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.738-741
• /
• 2000

Univorm epitaxial $CoSi_2$layers have been grown in situ on a (100) Si substrate at temperatures near$ 600^{\circ}C$ by reactive chemical vapor deposition of cyclopentadienyl dicarbonyl cobalt, (Co(η(sup)5-C(sub)5H(sub)5) ($CO_2$). The growth kinetics of an epitaxial $CoSi_2$layer on al Si(100) substrate was investigated at temperatures ranging from 575 to $650^{\circ}C$. In initial deposition stage, plate-like discrete $CoSi_2$spikes were nucleated along the <111> directions in (100) Si substrate with a twinned structure. The discrete $CoSi_2$plates with both {111} and (100) planes grew into an epitaxial layer with a flat interface on (100) Si. For epitaxial $CoSi_2$growth on (100) Si, the activation energy of the parabolic growth was found to be 2.82 eV. The growth rate seems to be controlled by the diffusion of Co through the $CoSi_2$layer.

• Convergence Security Journal
• /
• v.13 no.4
• /
• pp.3-10
• /
• 2013

Cyber attacks are threats to national security. Today, cybersecurity threats have various types, the theft or spread of privacy and national secret, the realization of direct attacks to infrastructure and the hacktivism with political or social objectives. Furthermore, There are special situations in South Korea because of North Korea's threats. Thus, It is necessary to handle cybersecurity as a kind of national security problem. It is a time to identify problems of governance system in cybersecurity and to improve related Acts and subordinate statutes. There are several tasks for legal improvement for governance system in cybersecurity. They are improving legal bases for the roles of the relevant authorities in cybersecurity, consolidating national joint response to cyber accidents, establishing and vitalizing information sharing system, constructing foundation of cybersecurity through industry promotion and manpower development, and acquiring defensive tools by enhancement research an development. In order to address these challenges, it is necessary to pay much attention to enactment and to revision laws and to practice legislative procedure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.17-24
• /
• 2003

Access network is one of the most critical components of telecommunication networks. Essentially it provides the final connection through to the subscriber and at the same it is usually the most expensive component in terms of capital investment and ongoing cost of maintenance and repair In recent, various access technologies with broadband have been developed and also are emerging newly Comparing fixed access networks, the concrete concept as well as the scope of mobile access networks or parts has not been defined yet although it is caused by peculiarities of mobile network with mobility-guarantee technology, use of RF resource, fixed-exchange and transport networks This article examines the characteristics and detailed functions of BTS, BSC, MSC and other components in CDMA mobile network under the IS-95 A/B and cdma 2000-1x standards comparing the ITU's access network functional model From the systematic and functional perspectives, futhermore, an alternative definition for access parts of mobile network is proposed.