• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.121-126
• /
• 2000

The effect of electroless Ni and Cu plating on $LaNi_5$, $AB_5$ type hydrogen storage alloy was investigated by the various electrochemical techniques such as constant current charge-discharge test, cyclic voltammeoy, and a.c. impedance spectroscopy. Scanning electron microscopy and X-ray diffraction test were conducted for phenomenological logical analyses. Cyclic Voltammetry results show that activation characteristics, cycle life and reaction ,rate were improved through electroless Ni and Cu plating. Compared with bare $LaNi_5$ the charge transfer resistance of electrode was greatly reduced as charge-discharge cycle increases. Therefore, electroless Ni and Cu plating on $LaNi_5$ alloy tends to accelerate the early activation, increasing the cyclic lift of electrode.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.371-380
• /
• 2006

We design and fabricate a novel tunable wavelength filter, which utilizes long-range surface plasmon-polaritons excited along nm-thick-metal strips. A gold metal strip, with $\sim$ cm length, 20 nm thickness, and $\sim$ 5$\mu$m width, is embedded in thick thermo-optic Polymer films supported by a silicon wafer. A dielectric Bragg grating structure is Placed on the metal strip, so that transmission signals at telecom wavelength are selected by thermal effect of the thermo-optic polymer. High extinction ratio of 25 dB and total insertion loss of $\sim$25 dB/cm can be measured by single-mode coupling of optical fibers. We also verify that wavelength tuning of the long-range surface plasmon-polariton filters can be achieved by electric current directly applied to the metal-strip waveguides.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.34-38
• /
• 2004

Hot embossing master is indispensable for the fabrication of polymeric optical waveguides using hot embossing technology. Sidewall roughness of silicon master is directly related to optical loss of optical waveguides In this paper, a silicon master was fabricated by using a deep-RIE process. Additionally, thermal oxidation followed by oxide removal was carried out to minimize etched Si sidewall roughness. Thermal oxidation and oxide removal were performed with $H_2O_2$ atmosphere at $1050^{\circ}C$ and $NH_4$F:HF=6:l BOE, respectively, for the oxide thickness of 400$\AA$, 1000$\AA$, 3000$\AA$, 4500$\AA$, 5600$\AA$ and 6200$\AA$. The sidewall roughness was characterized by SEM and SPM-AFH measurements. We found that the roughness was improved from 12nm (RMS) to 6nm (RMS) for the scalloped sidewall and from 162nm (RMS) to 39nm (RMS) for the vertical striation sidewall, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.145-156
• /
• 1990

In this study, thermophysical properties of the engineering ceramic materials such as $Al_{2}$O$_{3}$, Si$_{3}$N$_{4}$ and SiC were measured b y a single rectangular pulse heating method. The values of thermal diffusivities, specific heats, and thermal conductivities were measured as a function of temperature ranging form room temperature to 1300K. The measured thermal properties of one group of ceramic material were compared with those of other group and discussed in detail in connection with the chemical composition. Thus, some criteria for thermal design with the engineering ceramic materials were proposed.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.472-477
• /
• 1997

Iron was bound to neutral detergent fiber (NDF) obtained from 15 kinds of vegetables commonly consumed in Korea. Iron binding capacity of NDF ranged from 37.83% to 85.51%, and it increased as the pH increased and reached to the maximum at pH 7 in all vegetables. The amount of Fe bound to NDF increased as the Fe concentration increased.

• Journal of Chest Surgery
• /
• v.32 no.7
• /
• pp.665-667
• /
• 1999

We report a case of ruptured sinus of Valsalva aneurysm in 48-year-old male, presenting the symptom of congestive heart failure. Echocardiography showing a hairpin-like sac ex tended from the left coronary sinus to the left ventricle adjacent to the anterior mitral valve leaflet, suggested ruptured sinus of Valsalva aneurysm or aorto-left ventricular tunnel. Operative findings revealed that left sinus of Valsalva aneurysm had multiple openings faced left ventricle, 7 mm in diameter, 20 mm in length. The proximal opening was closed with bovine pericardium and distal openings were closed with spaghetti pledgeted reinforced sutures. The patient was discharged on the 14th postoperative day, and follow up for 8 months uneventfully. This case was reported for its rarity and to describe the techniques of surgical repair.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.271-279
• /
• 2009

The objective of this study is to develop the scheme to apply one-dimensional finite volume method (FVM) to natural river with complex geometry. In the previous study, FVM using the Riemann approximate solver was performed successfully in the various cases of dam-break, flood propagation, etc. with simple and rectangular cross-sections. We introduced the transform the natural into equivalent rectangular cross-sections. As a result of this way, the momentum equation was modified. The accuracy and applicability of newly developed scheme are demonstrated by means of a test example with exact solution, which uses triangular cross-sections. Secondly, this model is applied to natural river with irregular cross-sections and non-uniform lengths between cross-sections. The results shows that the aspect of flood propagation, location and height of hydraulic jump, and numerical solutions of maximum water level are in good agreement with the measured data. Using the developed scheme in this study, existing numerical schemes conducted in simple cross-sections can be directly applied to natural river without complicated numerical treatment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1781-1786
• /
• 2009

최근 들어 하천의 자동유량측정에 많이 활용되고 있는 고정식 음파도플러유속계는 여러 개의 셀 유속 자료를 제공한다. 이러한 유속 자료들은 단면의 특정 위치에 고정되어 있어 수심 변화에 따라 변화하는 최대유속 구역을 직접 측정할 수 없으므로 최대유속과 평균유속 사이의 단순한 관계를 활용하여 유량 산정을 하기는 곤란하다. 다만, 단면상의 여러 지점에 대한 유속 측정치를 얻을 수 있다는 점을 이용하여 모의된 유속분포와 결부하면 유량을 산정하는데 활용 가능하다. 본 연구에서는 Chiu(1988)가 제안한 단면의 무차원적 유속분포를 모의하는 확률론적 유속분포 공식과 고정식 ADVM의 유속자료를 활용하여 유량을 산정하는 방법을 검토하였다. 유속분포 공식의 주요 매개변수 중에서 최대유속과 평균유속의 관계를 나타내는 �� 은 ADVM이 설치된 단면 및 인접 단면에서 ADCP로 측정한 자료를 이용하여 도출하였으며, $\beta$와 h는 국내 하천에 대한 자료 분석을 통해 얻어진 값을 사용하였다. 2006년부터 2007년까지의 유량이 비교적 안정된 11개 케이스의 댐 방류량 조건 및 동일한 지점에서 개발된 유속지수법 유량과 상호 비교하였으며, 그 결과 댐방류량 대비 상대오차가 평균 6.44%로 유속지수법의 7.43%에 비해 약간 크지만 유량 산정이 비교적 정확하게 이루어짐을 확인할 수 있었다. 또한 연속 유량 측정 결과 여수로 방류량에 대해서 약 10.6%의 오차를 나타내고 있었다. 한편, 보다 고유속 구역을 측정할 목적으로 2008년에 기존의 ADVM에 추가로 1.25m 높은 위치에 홍수 측정을 위한 저주파 ADVM을 설치하여 운영할 경우 2008년의 4개 케이스에 대해 댐방류량 대비 2.1%의 상대오차를 나타내어 3.9%의 유속지수법에 비해 약간의 개선효과가 있었으며, 이 역시 유량을 비교적 잘 산정하는 것으로 나타났다.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.17-25
• /
• 2005

The bender element method is an experimental technique to determine very small strain ($<10^{-3}\%$), elastic shear modulus of a soil, $G_{max}$ by measuring the velocity of shear wave propagation through a sample. Bender elements have been applied as versatile transducers to measure small strain modulus of wet or dry soils in various laboratory apparatus. In this paper, bender element (BE), resonant column (RC) and torsional shear (TS) tests were performed on Toyoura sand at various testing conditions using the modified Stokoe type RC/TS testing equipment capable of performing BE test. Based on the results, applicabilities of the testing method using bender element were evaluated by comparing the values of $G_{max}$ obtained from RC/TS and BE testing methods. For more dependable evaluation, the loading frequency of each testing method was considered for the results obtained for samples in saturated condition by adapting Biot's theory.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.521_523
• /
• 2009

최근 고유가에 따른 발전비용 증가와 교토의정서 발휘로 인한 $CO_2$ 저감의무 등 환경보전이라는 사회적 요구와 맞물려 새로운 신재생에너지 분야에 관심이 고조되고 있는 실정이다. 이러한 신재생에너지로 대표되는 풍력, 태양광, 연료전지 등을 이용하는 발전방식은 저용량의 발전으로 대규모 집중형 전원이 아니 전력 수요지 근방에서 설치되는 비교적 작은 규모의 분산형전원(DG;Distribution Generator)으로 배전선로에 직접 연계됨에 따라 배전계통에도 큰 변화가 일고 있다. 분산전원(DG)이 배전계통에 연계됨에 따라 전압변동에 따른 전압조정, 고조파 계통유입에 따른 전기품질, 계통고장시의 분산전원의 단독운전 방지, 고장전류의 분산에 따른 선로의 보호협조 등 다양한 새로운 문제점이 대두되고 있고 이를 해결하기 위해 연구개발 및 신기자재개발 등이 활발히 진행되고 있다. 현재 배전자동화시스템에 적용되고 있는 고장검출 알고리즘은 단방향으로 전기를 공급하던 전통적인 배전방식에서 단순 과전류요소에 의해 고장검출하는 알고리즘을 적용하고 있기 때문에 분산전원이 연계된 양방향 전기공급 배전계통에서는 정확하게 고장구간을 검출하기 어렵다. 이로 인해 고장판단 문제점과 보호기기의 오동작 등으로 정확하게 고장구간을 판단하지 못하여 광역정전이 발생되고 고장복구가 장시간 소요되고 있는 실정이다. 본 논문에서는 이를 해소하기 위해 양방향 전기공급 배전계통에서 고장이 발생시 고장점으로 유입되는 고장전류의 파형형태를 분석하여 고장 구간을 판단하는 알고리즘을 소개하고자 한다. 또한 다기능 mFRTU(mFRTUmulti-function Feeder Remote Terminal Unit) 의 고장 구간 판단 알고리즘의 신뢰성을 검증하기 위해 실선로에서 실증시험을 시행하였으며, 그 결과를 분석하여 타당성을 제시하고자 한다.