• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.41-50
• /
• 2024

This study reports the structural geometry and folding mechanism of a regional-scale overturned fold in the Daecheong Island, central-western part of the Korean Peninsula. Based on low-hemisphere stereographic and down-plunge projections using data from a detailed field survey, we classify the regional-scale fold as an open overturned fold shallowly plunging toward NE. The asymmetric and symmetric parasitic folds in the limb and hinge zones indicate layer-parallel shortening prior to flexural-flow folding. Fold dating must be required to decipher the orogenic process causing the regional-scale overturned fold in the Daecheong Island.

• Resources Recycling
• /
• v.30 no.5
• /
• pp.57-66
• /
• 2021

In this study, we attempted to separate and recover Cu from low-grade copper ore by a hydrometallurgical process. The leaching sample obtained after crushing and sieving by 0.355 mm of low-grade copper ore contained 1.5% Cu, 4.7% Fe, 1.0% Mn, and 0.3% Zn. The Cu in the oxide ore was very well leached into sulfuric acid and 97% Cu leaching efficiency was achieved at 80℃ and 3 M sulfuric acid (H₂SO₄). From the leaching solution, Cu was separated by solvent extraction from Fe, Mn, and Zn using LIX984N. The separation tendency between Cu and other metals was confirmed through the distribution ratio and separation factor. By plotting the McCabe-Thiele Diagram, the optimum condition for recovering Cu is 5 vol.% LIX984N, 2-stage counter-current solvent extraction, and an O/A ratio of 0.5. Using this method, 99% of the Cu was extracted and a CuSO₄ solution was finally obtained that contained 1.6 g/L Cu after the stripping process using 2 M H₂SO₄.

• Resources Recycling
• /
• v.30 no.4
• /
• pp.27-34
• /
• 2021

In this study, the leaching behavior of vanadium (V) was investigated through CaO roasting and sulfuric acid leaching from domestic V-bearing titanomagnetite (VTM). Changes in the phase according to the amount of CaO added and roasting temperature were analyzed. Regardless of the roasting conditions, perovskite (CaTiO₃) was preferred to form. When the CaO content was increased, the calcium ferrite (CaFeO_x) phase was formed; otherwise, ferrite (Fe₂O₃) was preferred. After CaO was roasted, leaching was performed for 6 h with 1M sulfuric acid at 50℃ and a 10% solid-liquid ratio. Results of leaching revealed that when the roasted product was sintered, V was not sufficiently oxidized, and the leaching efficiency decreased. In addition, when the roasting temperature was low, the leaching efficiency of V decreased due to the influence of unreacted excess CaO. To lower the leaching efficiency of iron and titanium in VTM concentrates, suppressing the formation of CaTiO₃ and CaFeO_x was necessary by minimizing the amount of CaO added. Consequently, a leaching efficiency of 86% V, 4.3% Fe, and 6.5% Ti was obtained when the roasted product of 1150℃ and 10 wt% CaO was leached.

• Journal of the Korean earth science society
• /
• v.32 no.1
• /
• pp.57-72
• /
• 2011

The purpose of this study is to identify the effects of Creative Geo Educamp-the thematic trips with geoscientist, donation of KIGAM's intellectual properties. It was carried out twice and each time took professional development programs for 16 hours. There were 35 secondary science teachers (2010. 7.6.-8.) and 31 elementary teachers (2010. 7.20.-22.). This program was designed to contribute the public education by using intellectual properties of KIGAM. Textbooks and kits were developed for the creative activities according to 2009 Curriculum Revision and they were donated as educational materials. The survey showed that the participants have a high satisfaction of the textbooks and kits developed. Its figures are 4.45 of secondary science teachers and 4.8 of elementary teachers out of 5 points.

• Geophysics and Geophysical Exploration
• /
• v.25 no.3
• /
• pp.109-119
• /
• 2022

The computational efficiency of reverse time migration (RTM) based on numerical modeling is not secured due to the high-frequency band of several hundred Hz or higher for data acquired through a three-dimensional (3D) ultra-high-resolution (UHR) seismic survey. Therefore, this study develops an RTM program to derive high-quality 3D geological structures using UHR seismic data. In the traditional 3D RTM program, an excitation amplitude technique that stores only the maximum amplitude of the source wavefield and a domain-limiting technique that minimizes the modeling area where the source and receivers are located were used to significantly reduce memory usage and calculation time. The program developed through this study successfully derived a 3D migration image with a horizontal grid size of 1 m for the 3D UHR seismic survey data obtained from the Korea Institute of Geoscience and Mineral Resources in 2019, and geological analysis was conducted.

• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.72-79
• /
• 2019

Underwater object detection method adopting electrical resistivity technique was proposed recently, and the need of advanced data processing algorithm development counteracting various marine environmental conditions was required. In this paper, we present an improved water tank experiment system and its operation results, which can provide efficient test and verification. The main features of the system are as follows: 1) All the processes enabling real time process for not only simultaneous gathering of object images but also the electrical field measurement and visualization are carried out at 5 Hz refresh rates. 2) Data acquisition and processing for two detection lines are performed in real time to distinguish the moving direction of a target object. 3) Playback and retest functions for the saved data are equipped. 4) Through the monitoring screen, the movement of the target object and the measurement status of two detection lines can be intuitively identified. We confirmed that the enhanced physical modeling system works properly and facilitates efficient experiments.

• Geophysics and Geophysical Exploration
• /
• v.22 no.1
• /
• pp.29-36
• /
• 2019

Regional airborne magnetic survey is very cost-effective mapping tool. Magnetic anomaly maps have abundant information, which are an important tool for understanding the geological evolution and mineral exploration. For this reason, the governments of many countries have made significant investment in the acquisition of airborne geophysical data over many decades. KIGAM (Korea Institute of Geoscience and Mineral Resources) began nationwide airborne magnetic mapping programme in 1982, and completed in 2017. The obtained magnetic data was reprocessed and magnetic database was built in 2018. In addition, the magnetic anomaly map of Korea with a scale of 1:1,000,000 was published. In this paper, we introduced a new magnetic anomaly map of Korea through describing the changing survey parameters during data acquisitions and history of data processing.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.68-76
• /
• 2019

It is very necessary for the metal recycling industries and the researchers to understand the current status of demand and supply of non-ferrous metals and their scraps. Domestic demand and supply of non-ferrous metals and their scraps have been surveyed and reported on the journal of the Korean Institute of Resources Recycling since ten years before. However, it was confined to six major non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium because there are so many kind of non-ferrous metals. In this article also, demand and supply of these non-ferrous metals in addition tin during recent five years (2014 ~ 2018) in Korean markets were reviewed, and their recycling ratio of scraps were briefly estimated. The statistical data were mainly cited from the data issued by Korea Customs Service (KCS) and Korea Non-Ferrous Metal Association, and some fragmental published review articles from magazines and other technical reports.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.1
• /
• pp.71-77
• /
• 2019

New geochronological data of U-Pb, Re-Os and the lead isotope analysis of the Cu-Mo-Au mineral deposits are reported in the Trapiche and Constancia around Apurimac province, southeastern part of Peru. The measured ages were the first regional pulse of previously reported mineralization age between 28 and 33 Ma. The lead isotopic results indicate two sources of mineralization. The first source is thought to be derived from the upper crust and the second one is thought to be derived from a mixture of the upper crust and the lower crust.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.133-144
• /
• 2008

The outputs from the fundamental research program of the Korea Institute of Geoscience and Mineral Resources (KIGAM) were analyzed using the research budget and manpower as input variables. The analysis was performed based on the research outputs of the past 3 years (FY2004 to 2006). More articles and patents came out in applied and development research areas among the geosciences fields. The statistical analysis indicates that each sub-field has different characteristics in research outputs. Research articles, patents, and research budget increase as the manpower increase. But research articles and patents do not always show positive relations to research budget.