• The Journal of Engineering Geology
• /
• v.4 no.2
• /
• pp.207-218
• /
• 1994

The natural constants of moving coil type geophone can be determined by free impedance and step force method. The former method was desirable for the measurement of natural frequency($f_o$), inertial mass(m) and damping factor($h_o$), but the latter method for sensitivity(G). In particular, the value by the latter method should be corrected for the noise by the long period movement of measurement device. The results of frequency characteristics from these constants operate the accelerometer and displacement system in the boundary of natural frequency.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.17-30
• /
• 2002

삼척-도계지역 일대에 분포하는 조선누층군의 풍촌층 석회석은 품위 및 암상에따라 상부고품위대와 하부석회암대로 분대가 가능한데, 이는 삼척-태백간을 북북동으로 흐르는 오십천을 경계로 서쪽에 분포하는 풍촌층과 비교할 때 다소간의 암상차이를 보인다. 즉, 풍촌층의 특징중에 하나인 중부백운암대가 본 역 일대에서는 백운암화가 미약하여 비교적 소폭으로 확인되며, 상부백색대 역시, 발달정도가 미약한 특징을 보인다. 시추탐사결과 확인된 삼척-도계지역의 풍촌층 상부고품위대는 일반적으로 상부백색대($\pm$15m) - 백운암대($\pm$15m) - 암회색대($\pm$50m)로 구분되는 것으로 나타났다. 각각의 품위는 상부백색대 : CaO 53.4~55.6%, 백운암대 : MgO 3.0~l8.4%, 암회색대 : CaO 50.4~54.2%로 나타나 제철용으로의 사용이 가능하나 백운암대에 대한 선별채광이 부분적으로 요망된다. 이들 석회석은 오십천대단층의 수반단층인 수조의 NNE계열 정단층들에 의해 빈번히 단절되어 있으며 일부지역에서는 EW향의 역단층에 의해 규제되기도 한다. 상기 제단층들은 석회암층을 단절시킬 뿐만아니라 단층각력, 단층점토, 암맥 등의 불순대를 수반하므로 개발에 장애요소가 되고 있다. 상부고품위대 부존표고는 지역에 따라 다소 차이가 있으나 200ML 내외에서 대부분 확인이 가능하며 지표노출 규모는 작은 편이나 $10^{\circ}$이하의 완경사로 화절층 하부에 부존되어 있어 갱도 채광에 적합한 형태를 이루고 있다.

• Economic and Environmental Geology
• /
• v.28 no.5
• /
• pp.481-485
• /
• 1995

This paper presents a new approaching method to determine the velocity and geometry of shallow subsurface from seismic refraction events. After picking the first breaks from seismic refraction data, we assume that field refraction seismogram can be replaced by the unit delta function having time shift of first break. Time curves are generated by shooting ray tracing. The partial derivatives seismogram for a damped least squares method is computed analytically at each step of the forward ray tracing. The technique is successfully tested on synthetic and real data. It has the advantage of real full waveform inversion, which is robust at low frequency band even if the initial guess is far from the true model.

• The Journal of Engineering Geology
• /
• v.7 no.2
• /
• pp.113-126
• /
• 1997

Electrical resistivity methods of dipole - dipole array profiling and Schiumberger array sounding were tested on a segment of the Woraksan granitic batholith for the research into the imaging of irregular attitudes of fracture zones in the crystaaline rock in terms of processing and interpretation schemes. By the dipole - dipole array method, inhomogeneities such as small scale of fracture zones were properly delineated down at some depth even within hard rock environment. Fracture zones were interpreted to be at the boundaries between the high amplitude zone and very low amplitude zone in the resistivity plot and they were also successfully outlined in two - dimensional layer and pseudo - three - dimensional volume constructed by the incorporation of vertical sounding data. The surface location of the fracture zones was correlated by the zero - crossing point in the VLF(very low frequency) electromagnetic data. Pseudo - three - dimensional attitudes of fracture zones were efficiently illuminated by optimum projection angle. The mean of bulk resistivity for the Woraksan granite and the near fracture zones is estimated to be approximately of 4,000 ohm - m which is much higher than the value of 700 ohm - m for the Rwachunri limesilicate environment. This difference is due to both the rock type, i.e., biotite granite vs limesilicate, and the occurrence of secondary openings of fold and fault associated with the intrusion of granite. In this study statistical analyses on the resistivity color plot were performed in terms of three representative statistical moments, i.e., standard deviation, skewness, and kurtosis. The fracture zones in the standard deviation plot were characterized by the higher value, compared to the value of homogeneous portion. The upper boundary of the high resistivity zone was also successfully delineated in the skewness and kurtosis plots.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.447-455
• /
• 2013

A micro-mechanical pipe network model with the shape of a cube was developed to simulate the behavior of fluid flow through a porous medium. The fluid-flow mechanism through the cubic pipe network channels was defined mainly by introducing a well-known percolation theory (Stauffer and Aharony, 1994). A non-uniform flow generally appeared because all of the pipe diameters were allocated individually in a stochastic manner based on a given pore-size distribution curve and porosity. Fluid was supplied to one surface of the pipe network under a certain driving pressure head and allowed to percolate through the pipe networks. A percolation condition defined by capillary pressure with respect to each pipe diameter was applied first to all of the network pipes. That is, depending on pipe diameter, the fluid may or may not penetrate a specific pipe. Once pore pressures had reached equilibrium and steady-state flow had been attained throughout the network system, Darcy's law was used to compute the resultant permeability. This study investigated the sensitivity of network size to permeability calculations in order to find out the optimum network size which would be used for all the network modelling in this study. Mean pore size and pore size distribution curve obtained from field are used to define each of pipe sizes as being representative of actual oil sites. The calculated and measured permeabilities are in good agreement.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.255-265
• /
• 2017

We have determined the optimal pumping rate of the PW-2 water well (depth=100 m) at Imgokri, Sangju City. Cutting analysis and geophysical logging data reveal water-producing horizons at 26.1-26.5, 28.0-30.0, 33, 58, and 71 m. For pumping rates of 40, 55, 70, 90, and $132m^3/d$ over 70 days, the estimated drawdown from the PW-2 well was 6.48, 11.56, 18.07, 28.99 and 60.26 m, respectively. During a constant-rate pumping test at a rate of $117m^3/d$, the cone of depression intersected an impermeable boundary after 120-150 min of pumping. Therefore, we consider the critical pumping rate for well PW-2 to be $90m^3/d$. After pumping at $90m^3/d$ for 70 days, the calculated drawdown was 28.82-31.27 m. We suggest an optimal pumping rate for well PW-2 of $70-90m^3/d$, as the optimal pumping rate should be similar to the critical pumping rate. Sharp increases in the slope of the time-drawdown relationship, dissolved oxygen concentrations, and oxidation-reduction potential during the constant-rate pumping test indicate the limited development of bedrock aquifers around PW-2.

• 한국석유지질학회:학술대회논문집
• /
• 2005.09a
• /
• pp.94-100
• /
• 2005

동해 울릉분지 북서부해역에서 채취한 코어퇴적물을 이용하여 울릉분지의 제4기 후기 층서와 퇴적환경을 연구하였다. 이를 위하여 테프라층서, 탄소연대측정, 퇴적상, 퇴적물의 암질, 퇴적물과 공극수의 원소성분 등을 분석하였다. 퇴적상을 기준으로 코어퇴적물은 Unit 1, Unit II 및 Unit III으로 나누어지며, Unit의 경계부근에서는 주로 화산력으로 구성된 2매의 향암질 또는 조면암질 테프라층과 주로 화산재로 구성된 1매의 유문암질 테프라층이 협재되어 나타난다. 이들 테프라층에는 울릉도에서 기원한 울릉-오키층(Unit I/II 경계, 약 8.1 cal. kyr BC)과 울릉-야마토층(약 30.7 cal. kyr BC), 일본에서 기원한 아이라-탄자와층(Unit I/II경계, 약 22.8 cal. kyr BC)이 있다. Unit II의 중간부근에서 발견되는 DLM(Dark Laminated Mud) 층에는 망간보다는 철이 상대적으로 풍부하고, 철은 주로 구상집적체의 황화철로 발견되는데, 이들 광물은 정체환경 동안 물의 순환이 약화된 시기에 무산소환경에서 형성되었다. 퇴적물 내 유기물은 해양성 기원으로, 열적 성숙단계가 대부분 미성숙단계에 놓여 있다. Termination I 전에 급격하게 총유기탄소 (TOC)의 함량이 증가함을 보여주는데, 이는 빙기에서 간빙기로 변하는 시기에 해수면 변동과 관련이 있는 것으로 보인다. 공극수와 공기층 가스의 분석에 의하면, 황산염($SO_4^{2-}$) 농도는 매몰심도와 함께 증가하고, 반대로 공기층 가스의 주성분인 메탄($CH_4$)의 농도는 감소한다. 이는 미생물학적인 활동과 관련된 황산염 환원작용이 코어 상부에서 일어났으며, 점차 메탄생성단계 (methanogenesis)로 전이가 일어났음을 의미한다.측해본 결과 침몰선체의 강도는 초기강도에 비해 약 2/5정도 감소하였음을 알 수 있었다.할 수 있었다. 이 연구 사례를 통하여 3차원 GPR 탐사 또한 국부적인 이상대의 규명뿐만 아니라 광역적인 고고학 조사에도 다른 물리탐사와 마찬가지로 쉽게 활용될 수 있다는 결론을 얻을 수 있었다. 3차원 GPR 탐사가 향후 국내의 문화재 조사에 표준화된 탐사과정 중의 하나로써 적극 활용되길 기대한다.larity가 높은 oil에서는 약 $70 {\~} 90\%$의 phenoxyethanol이 유상에 존재하였다. 또한, 미생물에 대한 항균력도 phenoxyethanol이 수상에 많이 존재할수록 증가하는 경향을 나타내었다. 따라서, 제형 내 oil tomposition을 변화시킴으로써 phenoxyethanol의 사용량을 줄일 수 있을 뿐만 아니라, 피부 투과를 감소시켜 보다 피부 자극이 적은 저자극 방부시스템 개발이 가능하리라 보여 진다. 첨가하여 제조한 curd yoghurt는 저장성과 관능적인 면에서 우수한 상품적 가치가 인정되는 새로운 기능성 신제품의 개발에 기여할 수 있을 것으로 사료되었다. 여자의 경우 0.8이상이 되어서 심혈관계 질환의 위험 범위에 속하는 수준이었다. 삼두근의 두겹 두께는 남녀 각각 $20.2\pm8.58cm,\;22.2\pm4.40mm$으로 남녀간에 유의한 차이는 없었다. 조사대상자의 식습관 상태는 전체 대상자의 $84.4\%$가 대부분이 하루 세끼 식사를 규칙적으로 하고 있었으며 식사속도는 허겁지겁 빨리 섭취하는 경우가 남자는 $31.0\%$, 여자는 $21.4\%$로 나타났고 이들을 제외한 나머지 사람들은 보통 속도 혹은 충분한 시간을 가지고 식사를 하였다. 평소 식사량은 조금 적게

• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.277-286
• /
• 2017

Mt. Baekdu which located the border of North Korea and China, is known as a potentially active volcano in a typical mountainous terrain. A lahar on the volcanic area is one of the important hazard that can cause the loss of life and property damage. In order to comprehensively address the impact of lahar hazard at Mt. Baekdu, we simulated lahar inundation area using Laharz_py. We assumed 750 m of additional elevation for DEM to draw proximal hazard zone boundary (PHZB) of Mt. Baekdu that H/L ratio are selected 0.10. And lahar volumes for simulation were estimated to $1{\times}10^6$, $5{\times}10^6$, $1{\times}10^7$, $5{\times}10^7$, $1{\times}10^8$, $5{\times}10^8$, $1{\times}10^9m^3$, respectively. In the results, 15 streams are located near a proximal hazard zone boundary, Amnok (Yalu) river (south), Toudaosonghua river, Jinjiang river and Huapi river (west-southwest), Songjiang river, Xiaosha river, Caozi river and Sandaosongjian river (west-northwest), Toudaobai river, Erdaobai river and Sandabai river (north), Wudaobai river-1, -2, -3 (northeast) and Duman (Tumen) river (east). The results of this study can be used as basic data to make a hazard map for reduce the damage that can be caused by volcanic hazards occurred on Mt. Baekdu.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.593-609
• /
• 2021

We proposed a numerical method for the thermo-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) and simulated thermally induced fracture slip. The present study is the benchmark simulation performed as part of DECOVALEX-2023 Task G, which aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as an assembly of Voronoi grains and calculated the interaction of the grains (blocks) and their interfaces (contacts) using a distinct element code, 3DEC. Based on an equivalent continuum approach, the micro-parameters of grains and contacts were determined to reproduce rock as an elastic material. Then, the behavior of the fracture embedded in the rock was characterized by the contacts with Coulomb shear strength and tensile strength. In the benchmark simulation, we quantitatively examined the effects of the boundary stress and thermal stress due to heat conduction on fracture behavior, focusing on the mechanism of thermally induced fracture slip. The simulation results showed that the developed numerical model reasonably reproduced the thermal expansion and thermal stress increment, the fracture stress and displacement and the effect of boundary condition. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.

• The Korean Journal of Petroleum Geology
• /
• v.9 no.1_2 s.10
• /
• pp.16-23
• /
• 2001

The study area in the East Sea is located on the northeastern margins of the Ulleung Basin near the Kita-Yamato Bank. The research area provides the important clue to the development of Miocene basins which are characterized by the normal faults and volcanic activities related to rifting in the continental crust. Kita-Yamato Bank is a small sediment-filled graben which was formed by failed rifting in the Early Miocene. The basins rapidly vary the bathymetry, depth of acoustic basement and thickness of sedimentary layer. The tension in the study area caused the extensional lithospheric deformation before/during the Early Miocene. In consequence, tectonic forces resulted in the depression or subsidence of basement from continental rifting in the Kita-Yamato Bank followed by the opening of the Ulleung Basin, and caused the onset of graben or half-graben structure bounded by large blocked syn-rift faults. Afterward no significant tectonic deformation exists, with the consequence that post-rift normal faults with small heave were formed and reactivated by the resultant forces such as tectonic subsidence, sediment loading and volcanic activity. The Cenozoic sediment layer has a maximum thickness of 1.0 s along the center of the graben or half-graben, which overlies the consolidated acoustic basement. Seismic units V and IV supposed to be syn-rift sedimentary rocks are deformed by both the volcanic activities and numerous basement-involved normal faults induced from extension. In the uppermost layer, slump scars resulted from the slope failure are recognized.