• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.578-581
• /
• 1991

The antioxidative effects of three kinds of commercial lecithin in fish oil(EPA 25%, DHA 10%) were investigated through active oxygen method (AOM, hrs. at $97.8^{\circ}C$), Oven test, polymer test by gel chromatography and coloring test. Although there were difference of antioxidative effect among commercial lecithins, antioxidative effects of the lecithins added to the fish oil increased with increasing the concentration of lecithin. Lecithin III(acetone insoluble content 65%) had the greatest antioxidative effect and the addition of 1%, 5 and 10% enhanced the oxidative stability to 310%, 620% and 840%, respectively. The results also showed that the polymerization in presence of 10% lecithin III did not occur up to 10 hours at the AOM condition, and the degree of color(Gardner number) increased as storage time went by and was accerated at high temperature.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.451-457
• /
• 2011

The effect of latex particle size on rheological and electrical properties of latex-blended polystyrene (PS)/multi-walled carbon nanotube (MWCNT) nanocomposites was investigated. Mono-dispersed PS particles synthesized either by emulsifier-free emulsion polymerization or by dispersion polymerization were mixed with MWCNTs under ultrasonication, and freeze-dried to prepare the nanocomposites. As the MWCNT content increased, storage modulus, complex viscosity and electrical conductivity were substantially increased. The increase of storage modulus and complex viscosity was higher for larger PS particles. The effect of particle size on electrical properties was different depending on MWCNT content. With lower MWCNT content, the nanocomposite prepared by smaller PS particles showed higher electrical conductivity, but the opposite result was given as the content increased.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.803-811
• /
• 2002

In this study the wear behavior of ultra high molecular polyethylene (UHMWPE) filled with kaolin particles by different methods was investigated. UHMWPE/kaolin composites were prepared by two different methods: polymerization-filling and powder mixing. Particularly in a powder mixing method. Particle dispersion and wear property according to powder mining method were examined. It was found from wear test that filling of inorganic filler into UHMWPE by polymerization filling was more effective way than by powder mixing method in improving Wear resistance of UHMWPE. It was also confirmed that abrasive wear was dominant wear mechanism and particle dispersion in the composite as well as interface property was an important factor in controlling the wear behavior of the resulting composites.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.122-133
• /
• 2009

Rubbers, such as natural rubber, polybutadiene, styrene-butadiene rubber, nitrile-butadiene rubber, chlorinated rubber and EPDM, have been continuously improved in response to a heavy demand and a new property requirement from industry. One of the best ways to realize the improvement is the modification of rubbers through chemical reactions, which produce materials with novel properties. In this review, chemical modification reactions of rubbers that contain carbon-carbon double bond units either in their main backbone or as a side group were briefly summarized. The chemical reactions introduce functional groups or functional polymer chains to polymer backbone, which transform a classical rubber to a highly functional material. Especially, we focused on a controlled/"living" radical polymerization techniques, with which a revolutionary broadening of the spectrum of the materials with well defined molecular weight, molecular weight distribution, chain end-functionality and architectures become possible.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.338-344
• /
• 1998

New type of chitosan derivatives, chitosan-g-MAP, were synthesized by graft copolymerization of mono (2-methacryloyl oxyethyl) acid phosphate (MAP) into chitosan, in order to solubilize chitosan in water. Ceric ammonium nitrate was used as an initiator for graft copolymerization. The optimal conditions for graft copolymerization were determined on the basis of reaction temperature, time, and the concentration of initiator and monomer. The reaction conditions for the highest percentage of grafting were as follows: an initiator concentration, 3.5${\times}$10$\^$-3/ M; monomer concentration, 0.19 M; and reaction temperature, 40$^{\circ}C$ The reaction rate reached the maximum value after 4 hrs of reaction. Antifungal activity was tested against Candida albicans, Trichophyton rubrum and Trichophyton violaceum by using chitosan-g-MAP and two other chitosan samples which have degree of deacetylation of 70% (DA-7) and 90% (DA-90). Their antifungal activities were investigated in weak acidic range. Maximum antifungal activity of them was observed at pH 5.75. Chitosan-g-MAP inhibited thoroughly the growth of Candida albicans and Trichophyton violaceum. Howerver, DA-70 and DA-90 showed higher antifungal activities on Trichophyton rubrum than that of chitosan-g-MAP.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.251-256
• /
• 2011

Effect of poly(propylene-co-octene) as a compatibilizer in toughened polypropylene/ poly(ethylene-co-octene) (EOC) was investigated. The EOCs used were metallocene catalyzed commercial linear low density polyethylene and they are elastomeric materials. The poly(propylene-co-octene) was synthesized by metallocene catalyst in our laboratory to be used as a compatibilizer in PP/EOC blends. PP/EOC blends without compatibilizer shows very low mechanical properties in specimens with weldlines while incorporation of a compatibilizer significantly increases the mechanical properties of specimens with weldlines. However, compatibilized PP/EOC blends does not show increased impact property in a weldline free specimen and it is attributed to low molecular weight of the poly(propylene-co-octene) synthesized in present study. It is expected that the poly(propylene-co-octene) having increased molecular weight provides very good performance as an effective compatibilizer in toughened polypropylene/EOC blends.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.141-145
• /
• 2000

Anodically Polymerized conducting Polypyrrole film electrode was employed to Pick up uranyl ion with the type of Gr/ppy, xylenol orange modified electrode. To have Porous and oriented ppy film, NBR was applied as precoating agent. The rate constant of polymerization was $3.22\times10^{-3}s^{-1}$ which was 1.6 times smaller value than bare graphite surface. The deposited amount of uranyl iou on $1.70Ccm^{-2}$ of ppy was $1.55\times10^{-4}g$. The matrix effect in artificial seawater was $6.8\%$. The polymer film electrode has a diffusion controlled process in conduction, but the modified Gr/ppy, $X.O^{4-}UO^+$ type was influenced on the ion doping and electronic conduction of film itself owing to increasing of impedance. The capacitance of electrical double layer was respectively enhanced to 56 and 130 times in Gr/ppy, $X.O.^{4-}$ and Gr/ppy, $X.O^{4-}UO^+$ than Grippy type electrode.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.94-99
• /
• 2013

Polydiacetylene (PDA) is made by photopolymerization of self-assembled diacetylene monomers. If diacetylene monomers are arranged systematically and close enough with distance of atoms, 1,4-addition polymerization will occur by the irradiation of 254 nm ultraviolet rays and then PDA will have alternated ene-yne polymer chains at the main structure. Aqueous solutions of diffused PDA is tinged with blue which shows ${\lambda}_{max}$ 640 nm. Visible color changes from blue to red occurs in response to a variety of environmental perturbations, such as temperature, pH, and ligand-receptor interactions. In this study, we synthesized cationic peptides - PCDA(10,12-pentacosadyinoic acid) liposome using a solid phase peptide synthesis (SPPS) method and prepared liposome solutions at various molar ratios using MPEG-PCDA. When mammalian cells were treated with the liposomes, high transfection efficiency and low toxicity were observed.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.186-191
• /
• 2002

The usefulness of oligonucleotide DNA chip was evaluated for detection and primary level identification of major waterborne viruses in environmental samples. The enteric waterborne viruses included enterovirus, adenovirus, and rotavirus. Total intracellular RNA of 10 BGM cell plates showing virus-specific cytopathic effects was extracted at the third day after inoculation. The intracellular RNA was then subjected to either enterovirus-specific RT-PCR followed by sequencing analysis, or the DNA chip. Seven out of 10 positive samples in cell culture were positive but the other three sample were turned out to be negative by both RT-PCR and DNA chip analyses. Nucleotide sequencing results and the DNA chip hybridization results of the RT-PCR product were in complete agreement in the identification of the 7 positive samples as enteroviruses. Using the DNA chip, it took only 3∼4 hr to complete detection and primary level identification of target viruses and additional procedures such as gel electrophoresis or nucleotide sequencing were not necessary. We believe that the DNA chip system can be employed as a highly effective and new detection methodology for environmental viruses.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.198-204
• /
• 2002

Poliovirus is a member of enterovirus which causes paralytic poliomyelitis, encephalitis and aseptic meningitis. Since poliovirus is spread by the fecal-oral route and poliovirus-contaminated water could be a potential threat for public health, detection of poliovirus in drinking water resource is important. Infectious poliovirus and poliovirus inactivated by heat or UV were used to test three detection methods such as cell culture method, reverse transcription-polymerase chain reaction (RT-PCR) and integrated cell culture (ICC)-PCR. Infectious poliovirus was detected by all three methods and ICC-PCR was the most sensitive and fast in detecting poliovirus. Inactivated polioviruses could not be detected by cell culture or ICC-PCR methods. On the other hand, heat- inactivated viruses could be detected by RT-PCR. Thus it is suggested that ICC-PCR method is the most sensitive and effective in detecting infectious polioviruses in water sample.