• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.51-56
• /
• 2012

One of the most critical and essential procedures in the interpretation of gravity and magnetic data is to separate the anomaly due to the specific geologic structure from the summation of effects from a broad variety of geologic sources, especially those of different depths. Separation of the residual anomaly from the regional field is the most simple case of the vertical separation. If the anomaly due to a layer of specific depth can be separated or the depth of the separated layer can be quantitatively determined, it may deserve the separation-sounding. We suggest a wavelength filter whose cutoff frequency is determined by log-power spectrum analysis, as a separation-sounding filter. We applied this filter both to synthetic and real gravity data acquired at Heunghae area, and compared the results with those of Jacobsen's upward continuation filter. These showed that the proposed separation-sounding filter could be a useful tool for interpretation of the vertical geologic structure by stripping the gravity effects of geologic sources down to the desired depth.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.68-77
• /
• 2011

Flood disasters on the metropolis where population and facilities were densely concentrated cause an enormous damage, therefore it is important to find risk and vulnerable area for floods, and then mid-long term disaster reduction plan should be established by the results. However, there is no rational method which reflects urban characteristics to estimate the regional safety for flood. so it is necessary to develop the standardized method of regional safety assesment due to urban flood. The proposed regional safety assesment model in this study was combined risk and mitigation score which consisted of three and two element, and 12 assesment factors which effect flood disasters were selected. And then the integrated regional safety was estimated by subtracting mitigation score from risk score. GIS tool was used to estimate the factor assesment and integrated regional safety. Developed regional safety assesment model was applied in Seoul to evaluate the suitability.

• Journal of Korean Society of Transportation
• /
• v.29 no.2
• /
• pp.71-80
• /
• 2011

Almost all Drivers who are not familiar with local areas usually rely on road signs equipped along the roadways. The road signs in Korea present the name of the city along the driver’s direction. The consistency of guided name on the road-signs is important for drivers. The discordances among road signs frustrate drivers particularly when the drivers are confused with whether or not they are in the right direction. There are several studies focusing on the continuity of information on the road signs. Most of the researches, however, do not suggest the objective way but diagnose present problem. Applying the Analytic Hierarchy Process (AHP), we evaluate the impact of information on road signs and select the candidate information considering the score and limited number of information. We also suggest the reasonable spatial influence area of road sign information using geo-spatial analysis. From this study, we expect that the director in charge of selecting information can make decision reasonably without difficulties of choosing information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.652-658
• /
• 2006

This paper deals with an electronic ballast for hish intensity short-arc discharge lamps, which consists of a boost converter, a step down converter operated as a current source with power regulation and a low frequency inverter with external ignition circuit The ignition circuit generates high voltage pulses of 130[Hz] up to 5 [kV]. A reignition circuit is equipped in the ballast, and it operates the lamp at a regular interval for protection when an ignition fails. Acoustic resonance phenomenon was eliminated by operating a low frequency square wave voltage and current. The measured lamp voltage, current and consumption power were 123.8 [V], 8.1 [A] and 1,002 [W], respectively. From the experiment, we confirmed that the prototype ballast operates the lamp with a constant power.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1988

In this study, a method of nonlinear dynamic analysis of suspension bridges subjected to random wind loads is pre.sented. The nonlinearity considered is the one due to the interaction between the motion of the bridge girder and the tertsion variation of the main cables. The equation of motion is formulated using a continuum approach. The coupling between the vertical and torsional motions are included in the analysis. The equation of motion is solved by using the mode superposition method. The analysis is carried out in the frequency domain utilizing the stochastic linearization technique on to the modal equations. In the linearization procedure, the nonlinear terms are approximated as linear ones with constant terms. The verification of the method has been performed on a case with four modal degrees of freedom. Example analyses are carried out on two suspension bridges for various wind speeds and wind force parameters. Numerical results indicate that, by including the nonlinearity into the analysis, the dynamic responses of the bridges, particularly in the vertical direction, change considerably.

• Proceedings of the KGS Conference
• /
• 2002.05a
• /
• pp.95-98
• /
• 2002

본 연구는 안동지역에 있어서 이른바 명당이라고 하는 음택 풍수 경관을 조사하여 그 형태와 특징을 살펴보고자 하였다. 안동문화원에서 펴낸 $\boxDr$안동의 분묘$\lrcorner$ 에 나오는 분묘를 대부분 조사하고 이를 형기론적 입장에서 형국으로 분류하였다. 태백산에서 소백산을 잇는 낙동정맥 살의 문수산(1206m)에서 하나의 지맥이 남쪽으로 흘러 태자산, 박달산, 오적산, 학가산(870m), 보문산(643m), 검무산(331m)을 이루어내어 안동의 서쪽 산줄기를 형성하며, 태백산에서 백병산, 일월산, 주방산(주왕산), 보현산, 황학산, 오산으로 이어지는 산줄기가 우측을 이루어내어, 이들 우백호와 좌청룡이 안동군 풍천면의 구담리에서 마주하게 된다. 그 사이로 안동군, 예안현 등이 입지하였다. 이러한 안동의 산세에 따라 낮은 구릉, 완만한 사면 및 높은 배후 산지가 전개되며 낙동강 본류와 지류가 흘러 다양한 형국이 나타나게 된다. 안동의 경우는 날짐승(봉, 학, 꿩), 꽃(모란, 연꽃, 칡넝쿨), 길짐승(닭), 들짐승(거북, 뱀), 물건(등잔, 가마솥, 밥상), 용, 달 등이 33개가 나타난다. 이들의 분포를 살펴보면 크게 낙동강 본류 이북 쪽에 집중한다. 이들 명당은 고도 상으로 해발고도 200미터 부근에 대부분 입지한다. 무릇 명당이란 안산과 조산을 넘어 득수가 잘 이루어져야 하므로 낙동강 본류를 중심으로 하고 그 지류를 향하여 분포하는 것은 당연하다 이들 명당의 형태와 공통된 특징을 살펴본 결과 명당은 반개방성, 중첩성, 안정성, 조화성, 균형성의 5가지 특징이 나타나는 곳이다. 이러한 명당의 특징은 태조산, 중조산, 소조산를 거쳐 주산 아래 산이 겹겹이 에워싸게 되고, 계곡물의 여러 줄기가 합수하고 물이 역류하지 않으며 잘 감아도는 곳으로 표현할 수 있다 이러한 명당의 기본적인 원리는 장풍(藏風)과 득수득파(得水得破)이다. 장풍과 득수란 '국'(局), 즉 산줄기와 수계로 이루어진 일정한 범위 속에 만물이 생태계 속에서 살아가는 모습인 '체형(體形)'의 의미가 나타나야 한다는 것이다. 그러나 이러한 의미는 시대에 따라 달라질 수 있는 것이다.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.513-520
• /
• 2005

The uniform truss mechanism is widely accepted as a shear transfer mechanism in reinforced concrete members. However, the uniform truss action cannot be expected when the bond stress distribution is not constant along longitudinal bars. A test method in which only the truss action takes place is developed and conducted to investigate the truss actions under various bond contributions. Based on the experimental results and analysis, the following findings can be obtained: 1) The bond stress distribution depends on the axial compression force, the amount of shear reinforcement and loading conditions. 2) The analysis using the combined truss model consisting of uniform and fan-shape trusses can predict the experimental results

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1269-1276
• /
• 2004

The Parameter Estimation for software existing reliability models, Goel-Okumoto, Yamada-Ohba-Osaki model was reviewed and Rayleigh model based on Rayleigh distribution was studied. In this paper, we discusses comparison of parameter estimation using maximum likelihood estimator and Bayesian estimation based on Gibbs sampling to analysis of the estimator' pattern. Model selection based on sum of the squared errors and Braun statistic, for the sake of efficient model, was employed. A numerical example was illustrated using real data. The current areas and models of Superposition, mixture for future development are also employed.

• Conservation Science in Museum
• /
• v.15
• /
• pp.78-95
• /
• 2014

To examine the materials, production techniques, and key features of Goryeo wooden lacquerwares, scientific analysis was conducted on six relevant lacquerware items. All of the items, except for a lacquered bowl ^{duksu 4123}, were found to have been made by first covering the surface of the wood with cloth and then varnishing with lacquer. The wooden frames of flower-shaped lacquered case and pine leaves shape lacquered case were made by wrapping thin wood around either the lid or bottom panel. In most cases, microscopic analysis revealed a lower layer of lacquer mixed with bone ash and bone dust, followed by an upper varnish layer of lacquer. SEM-EDS analysis and μ-XRF ^{Micro-X-ray Fluorescence} analysis showed that vermilion lacquer mixed with cinnabar was used on the surface. A lid decorated with a dot pattern was made by first varnishing the surface with yellow lacquer mixed with orpiment, and then irregular dot pattern with a mixture of black lacquer and soot. The vermilion lacquer used to varnish the side of the lacquered bowls was composed of lacquer mixed with cinnabar and minium ^{Red Lead}.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.3
• /
• pp.366-380
• /
• 2015

Park Geun-hye Administration has been leading HOPE Area(Living Happiness Sphere) policy as a part of strategy for the regional development. Recent study on HOPE Area policy mainly focuses on how to enhance cooperation among local governments or how to activate the HOPE area. However, as far as I found, the research on how HOPE area guideline as an institution is made and how HOPE area, the effect of the institution, is demarcated has not well been conducted. With based on these issues, this article aims to identify and examine the process of the HOPE area guideline-making and the designation of the HOPE area. For this purpose, new institutionalism is utilized for the analysis. The guideline was made through competition and compromise among a few parties concerned rather than a decision by unitary elite group, and the final outcome of the process reflected the balanced development strategy more than the growth pole development strategy. There was a tendency that the local governments try to make many HOPE areas by overlapping the HOPE areas, which are the outcomes of the bottom-up approach. In Seoul metropolitan area, a new type of HOPE area was introduced one year later than the other local regions.