• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.326-331
• /
• 2009

An algorithm is proposed for computing dynamic displacements of a bridge using FBG sensors. An existing algorithm for estimating dynamic displacements of a simply supported beam through mode superposition is extended and applied to various types of bridges with bending and torsional modes. The proposed algorithm is examined through field tests on a suspension span steel deck plate box girder bridge. Guidelines are provided for determining the number of modes and the number of strain gages to be used.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.3 s.55
• /
• pp.101-109
• /
• 2009

An algorithm is proposed for estimating dynamic displacements of a bridge by using FBG sensors and by superposing some measurable low modes. Modal displacements are obtained from the beam theory and the generalized coordinates are deduced from the strains measured by FBG sensors. By considering flexural and torsional modes occurred in bridges only as flexural modes of a simply supported beam by separating a bridge into multiple girders or parts, the proposed algorithm can be applied to various types of bridges. Guidelines are provided theoretically for determining the number of modes and the number of strain gages to be used. The proposed algorithm has been examined through simulation studies on various types of bridges, laboratory experiments on a model bridge, and field tests on a simple span PC Box girder bridge. Through the simulation study, the effects of the error in the vibration modes and measurement noise on estimating the dynamic displacements are analyzed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.995-1002
• /
• 2020

This paper investigates the achievable data rate for non-orthogonal multiple access(NOMA) with correlated information sources(CIS), under the binary phase shift keying(BPSK) modulation, in contrast to most of the existing NOMA designs using continuous Gaussian input modulations. First, the closed-form expression for the achievable data rate of NOMA with CIS and BPSK is derived, for both users. Then it is shown by numerical results that for the stronger channel user, the achievable data rate of CIS reduces, compared with that of independent information sources( IIS). We also demonstrate that for the weaker channel user, the achievable data rate of CIS increases, compared with that of IIS. In addition, the intensive analyses of the probability density function(PDF) of the observation and the inter-user interferennce(IUI) are provided to verify our theoretical results.

• Journal of Broadcast Engineering
• /
• v.23 no.3
• /
• pp.421-430
• /
• 2018

Many voice recognition systems use methods such as MFCC, HMM to acknowledge human voice. This recognition method is designed to analyze only a targeted sound which normally appears between a human and a device one. However, the recognition capability is limited when there is a group sound formed with diversity in wider frequency range such as dog barking and indoor sounds. The frequency of overlapped sound resides in a wide range, up to 20KHz, which is higher than a voice. This paper proposes the new recognition method which provides wider frequency range by conjugating the Wideband Sound Spectrogram and the Keras Sequential Model based on DNN. The wideband sound spectrogram is adopted to analyze and verify diverse sounds from wide frequency range as it is designed to extract features and also classify as explained. The KSM is employed for the pattern recognition using extracted features from the WSS to improve sound recognition quality. The experiment verified that the proposed WSS and KSM excellently classified the targeted sound among noisy environment; overlapped sounds such as dog barking and indoor sounds. Furthermore, the paper shows a stage by stage analyzation and comparison of the factors' influences on the recognition and its characteristics according to various levels of noise.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1098-1104
• /
• 2011

Data communications networks at sea can be modelled by multi-layered networks with traditional carriers (RF, satellites), and BWA (wireless LAN, WiBro, LTE), which partially makes it possible the high speed communication services (WWW, VoIP) at sea. In this paper, a novel routing scheme (CPR) is proposed which selects an optimal carrier for each hop in routes based on carrier preferences (CP). The carrier preferences are measured proactively depending on the feasibility of transmission characteristics (transmission rate, cost, and latency time) of the carriers for each application. Performance was compared with that of the OMH-MW (Optimal Medium per Hop based on Max-Win) routing scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.687-694
• /
• 2012

In OFDMA-based cellular system, inter-cell interference (ICI) reduces system capacity by aggravating receiving performance of the users located in edge of the cell. Therefore, to mitigate ICI is very important issue in cellular system. To deal with ICI problem, fractional frequency reuse (FFR) is introduced. FFR is an interference management technique. It separates each cell into inner cell and outer cell. Then, it allocates whole system bandwidth to inner cell and different frequency partition to each sector of outer cell. By doing this, outer cell users can ignore interferences from adjacent cells. So, the receiving performance of the cell edge users can be fairly increased. However, using FFR technique has a fatal side effect. In order to use different frequency partition among three sectors of outer cell, they can use only a third of the whole system bandwidth. Then, the reduction of available bandwidth reduces the system throughput directly. To solve this problem, we propose a new FFR method that allocates partially overlapped frequency partition to each sector of outer cell. And then, we suggest a proper overlapping ratio for practical cellular system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.2
• /
• pp.315-322
• /
• 2008

Titanium and its alloys have excellent corrosion resistance, high strength to weight ratios and creep properties in high temperature, which make them using many various fields of application. Especially, pure titanium, which has outstanding resistance for the stress corrosion cracking, crevice corrosion, pitting and microbiologically influenced corrosion, brings out to the best material for the heat exchanger, ballast tank, desalination facilities, and so on. Responding to these needs, welding processes for titanium are also being used GTAW, GMAW, PAW, EBW, LBW, resistance welding and diffusion bonding, etc. However, titanium is very active and highly susceptible to embrittlement by oxygen, nitrogen, hydrogen and carbon at high temperature, so it needs to shield the weld metal from the air and these gases during welding by non-active gas. In this study, it was possible to get sound beads without humping and spatter with a decrease of peak power according to increase of pulse width, change of welding speed and overlap rate for heat input control, and shield conditions at pulsed laser welding of titanium plates for Lap welding.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.7-13
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times, and estimation of the reliability and availability of a software product require quantification of a critical element of the software testing process : test coverage. This model called Enhanced non-homogeneous poission process (ENHPP). In this paper, exponential coverage and S-shaped model was reviewed, proposes the superposition model, which maked out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE statistics for the sake of efficient model, was employed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.137-140
• /
• 2011

최근 활발하게 연구되고 있는 4G 이동 통신 시스템의 하나인 LTE-Advanced 시스템에서 릴레이 기법은 주요 기술로써 고려되고 있다. 릴레이 기법을 도입함으로써 LTE-Advanced 시스템은 셀 가장자리 유저들에게 좋은 성능의 서비스를 제공할 수 있을 뿐 아니라 셀 커버리지를 늘릴 수 있을 것으로 기대된다. 하지만 LTE-Advanced 시스템에 릴레이 기술을 도입하는 구체적인 기법은 아직 연구되지 못하고 있다. 이러한 상황에서 우리는 기존의 직교 할당 방식과 중첩 할당 방식을 이용하여 릴레이 기법을 도입시 새로운 자원 할당 방법을 제안할 것이다. 제안 기법의 기본 아이디어는 서비스 지역에 진입한 단말이 채널 정보를 이용하여 eNB(eNodeB)로 접속할지 RS(Relay Station)로 접속할지를 결정한다. 기존의 직교 할당 방식과 중첩 할당 방식을 그대로 적용하는 경우와 비교하여 우리가 새로 제안하는 자원 할당 기법은 전송률 뿐만 아니라 공정성 측면에서도 우수한 성능을 나타낸다.

• Convergence Security Journal
• /
• v.14 no.5
• /
• pp.49-56
• /
• 2014

In this paper, we proposed a method for representing local facial features based on LDP (Local Directional Pattern). To represent both PFF (Permanent Facial Features) and TFF (Transient Facial Features) effectively, the proposed method configure local facial feature vectors based on overlapped blocks for each facial feature in the forms of various size and shape. There are three advantages - it take advantages of geometric feature based method; it shows robustness about detection error using movement characteristics of each facial feature; and it shows reduced sampling error because maintain spatial information caused by block size variability. Proposed method shows better classification accuracy and reduced amount of calculation than existing methods.