• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2016

The hypocenter distribution of microseismic events generated by hydraulic fracturing for shale gas development provides essential information for understanding characteristics of fracture network. In this study, we evaluate how inaccurate velocity models influence the inversion results of two widely used location programs, hypoellipse and hypoDD, which are developed based on an iterative linear inversion. We assume that 98 stations are densely located inside the circle with a radius of 4 km and 5 artificial hypocenter sets (S0 ~ S4) are located from the center of the network to the south with 1 km interval. Each hypocenter set contains 25 events placed on the plane. To quantify accuracies of the inversion results, we defined 6 parameters: difference between average hypocenters of assumed and inverted locations, $d_1$; ratio of assumed and inverted areas estimated by hypocenters, r; difference between dip of the reference plane and the best fitting plane for determined hypocenters, ${\theta}$; difference between strike of the reference plane and the best fitting plane for determined hypocenters, ${\phi}$; root-mean-square distance between hypocenters and the best fitting plane, $d_2$; root-mean-square error in horizontal direction on the best fitting plane, $d_3$. Synthetic travel times are calculated for the reference model having 1D layered structure and the inaccurate velocity model for the inversion is constructed by using normal distribution with standard deviations of 0.1, 0.2, and 0.3 km/s, respectively, with respect to the reference model. The parameters $d_1$, r, ${\theta}$, and $d_2$ show positive correlation with the level of velocity perturbations, but the others are not sensitive to the perturbations except S4, which is located at the outer boundary of the network. In cases of S0, S1, S2, and S3, hypoellipse and hypoDD provide similar results for $d_1$. However, for other parameters, hypoDD shows much better results and errors of locations can be reduced by about several meters regardless of the level of perturbations. In light of the purpose to understand the characteristics of hydraulic fracturing, $1{\sigma}$ error of velocity structure should be under 0.2 km/s in hypoellipse and 0.3 km/s in hypoDD.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.34-40
• /
• 2008

Underwater seismic refraction with advanced interpretation approaches makes important contributions to shallow marine exploration and geotechnical investigations in Australia's coastal areas. A series of case studies are presented to demonstrate the recent applications of continuous and static USR methods to river crossing and port infrastructure projects at various sites around Australia. In Sydney, static underwater seismic refraction (USR) with bottom-placed receivers and borehole seismic imaging assisted the development of improved geotechnical models that reduced construction risk for a tunnel crossing of the Lane Cove River. In Melbourne, combining conventional boomer reflection and continuous USR with near-bottom sources and receivers improved the definition of a buried, variably weathered basalt flow and assisted dredging assessment for navigation channel upgrades at Geelong Ports. Sand quality assessment with continuous USR and widely spaced borehole information assisted commercial decisions on available sand resources for the reclamation phase of development at the Port of Brisbane. Buried reefs and indurated layers occur in Australian coastal sediments with the characteristics of laterally limited, high velocity, cap layers within lower velocity materials. If these features are not recognised then significant error in depth determination to deeper refractors can occur. Application of advanced refraction inversion using wavefront eikonal tomography to continuous USR data obtained along the route of a proposed offshore pipeline near Fremantle allowed these layers and the underlying bedrock refractor to be accurately imaged. Static USR and the same interpretation approach was used to image the drowned granitic regolith beneath sediments and indurated layers in the northern area of Western Australia at a proposed new berthing site where deep piling was required. This allowed preferred piling sites to be identified, reducing overall pile lengths. USR can be expected to find increased application to shallow marine exploration and geotechnical investigations in Australia's coastal areas as economic growth continues and improved interpretation methods are developed.

• Journal of Science Education
• /
• v.42 no.1
• /
• pp.27-48
• /
• 2018

The purposes of this study are to derive suggestions and implications to improve the continuity of Korean Science & Practical Arts (Technology Home Economics) curricula through international comparative analysis with focus on the science curricula or standards in five countries (Canada, New Zealand, Singapore, the United States, Korea). Original documents of the national curriculums or standards of each country collected from NCIC comparatively analyzed the big concepts of the 'system' and 'energy' based on features of related components of curriculum contents, vertical, and lateral connectivity. The results indicated that the big concepts of systems and energy were used internationally to consider the curriculum continuity. In most countries, the big concept of system was used as a framework to integrate science with technology or other contents. In particular, it was also utilized to strengthen vertical and lateral connectivity in earth science and space science contents area. In the comparison of countries for the system as the big concept, New Zealand focused interrelationship between system and human activities, systems' interaction, levels and features of system concept for the linkage between grades and subjects on the basis of level. In the case of Canada and Singapore, science and technology are combined to strengthen contents' connection. However, the revised 2015 curriculum has a lack of continuity and sequence because the concepts of system and energy were concentrated on a specific grade and contents' area. The curriculum was not developed systematically for multiple grades according to their levels. In conclusion, Korean science curriculum requires sufficient understanding of students' learning and research on learning progressions and curriculum continuity. In addition, it is very important to constitute the curriculum based on the vertical and lateral connectivity in order to improve science education and to foster students' key competencies and abilities.

• Science of Emotion and Sensibility
• /
• v.19 no.1
• /
• pp.95-110
• /
• 2016

Uncanny valley refers to the condition where the affinity of a human-like object decreases dramatically if the object becomes extremely similar to human, and has been hypothesized to derive from the cognitive load of categorical conflict against an uncanny object. According to the hypothesis, the present study ran an oddball task consisting of trials each displaying one among a non-human, human and uncanny face, and measured event-related potentials (ERPs) for each trial condition. In Experiment 1, a non-human face was presented in 80% of the trials (standard) whereas a human face for another 10% trials (target) and an uncanny face for the remaining 10% trials (uncanny). Participants' responses were relatively inaccurate and delayed in both the target and uncanny oddball trials, but neither P3 nor N170 component differed across the three trial conditions. Experiment 2 used 3-D rendered realistic faces to increase the degree of categorical conflict, and found the behavioral results were similar to Experiment 1. However, the peak amplitude of N170 of the target and uncanny trials were higher than the standard trials while P3 mean amplitudes for both the target and uncanny trials were comparable but higher than the amplitude for the standard trials. P3 latencies were delayed in the order of the standard, target, and uncanny trials. The changes in N170 and P3 patterns across the experiments appear to arise from the categorical conflict that the uncanny face must be categorized as a non-target according to the oddball-task requirement despite its perceived category of a human face. The observed increase of cognitive load following the added reality to the uncanny face also indicates that the cognitive load, supposedly responsible for the uncanny experience, would depend on the increase of categorical conflict information subsequent to added stimulus complexity.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.120-125
• /
• 2012

Purpose : The purpose of this study was to compare count between Chang's method and CT-based attenuation correction (AC-CT) among the attenuation correction (AC) methods for non-attenuation correction (AC-non) images of Brain SPECT (Single Photon Emission Computed Tomography). Materials and Methods : We injected $^{99m}Tc$ 37Mbq in a Hoffman 3D phantom filled with distilled water in the phantom study, and injected intravenously $^{99m}Tc$-HMPAO 740Mbq in a normal volunteer in the patient study, and then obtained Brain SPECT images with Symbia T6 of Siemens and conducted quantitative brain analysis. Transverse images to which each method was applied were rebuilt at the same position, and 6 regions of interest (ROI) were drawn on each of Slice No. 10, 20 and 30 and then the counts of AC-non, AC-CT and Chang's method were compared. Results : The mean counts of AC-non, AC-CT and Chang's method were $4606.8{\pm}511.3$, $16794.6{\pm}2429.4$, and $8752.6{\pm}896.5$, respectively, in the phantom study and $5460.8{\pm}519.6$, $15320{\pm}1171.6$ and $12795{\pm}1422.1$, respectively, in the patient study. In the phantom study, the ratio of AC-CT to AC-non was 3.70 and the ratio of Chang's method to AC-non was 1.92, and in the patient study, they were 2.85 and 2.38, respectively. Conclusion : From this study, we found that AC-CT makes higher AC than Chang's method. In addition, when Chang's method was used, AC in the patient study was higher than that in the phantom study. These results need to be considered also in other examinations.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.101-104
• /
• 2010

Purpose: Raynaud scan is divided to flow, blood pool and local-delay image. Usually, we evaluate comparison through blood pool and local-delay image. We will evaluate about usability when comparative observe blood image and local-delay image in Raynaud scan that used $^{201}Tl$ as making flow image to one sheet of images. Materials and Methods: We have selected 29 Raynaud phenomenon patients aged 14~68 years who visited department of vascular surgery between Feb. 2008 and Aug. 2009. An intravenous injection $^{201}Tl$ of 111 MBq (3 mCi) to opposite side diagonal line limbs above an internal auditing department. Equipment used Philips gamma camera forte A-Z, and collimator used LEHR. Matrix size set up to each $64{\times}64$, $128{\times}128$, $256{\times}256$ and zoom factor used to full field. Protocol of dynamic is 2 second to 155 frames. Blood pool and delay count to 300 second. We set up ROI by a foundation to data acquired in PEGASYS processing program. Each results were analyzed with the SPSS 12.0 statistical software. Results: Each averages of count ratio (Rt / Lt) to have been given at composite image, a blood pool image, delay images analyzed at Raynaud phenomenon patients is $1.25{\pm}0.39$, $1.20{\pm}0.33$, $1.11{\pm}0.17$. The sample analysis results of blood pool image and delay image contented itself with p<0.029. Also, there don't have been each difference, and blood pool image, delay image regarding composite image was able to know. Conclusion: We were able to give help for comparison to evaluate a blood pool image and a local delay image at the Raynaud scan which used $^{201}Tl$ while making a flow image to one sheet image. Identification to be visual too was possible. If you are proceeded a researcher that there was further depth, you are more appropriate for, and you may get useful information.

• Journal of Plant Biotechnology
• /
• v.43 no.2
• /
• pp.213-222
• /
• 2016

This study aims to establish a system for the rapid discrimination of Zoysia species using metabolite fingerprinting of FT-IR spectroscopy combined with multivariate analysis. Whole cell extracts from leaves of 19 identified Zoysia japonica, 6 identified Zoysia sinica, and 38 different unidentified Zoysia species were subjected to Fourier transform infrared spectroscopy (FT-IR). PCA (principle component analysis) and PLS-DA (partial least square discriminant analysis) from FT-IR spectral data successfully divided the 25 identified turf grasses into two groups, representing good agreement with species identification using molecular markers. PC (principal component) loading values show that the $1,100{\sim}950cm^{-1}$ region of the FT-IR spectra are important for the discrimination of Zoysia species. A dendrogram based on hierarchical clustering analysis (HCA) from the PCA and PLS-DA data of turf grasses showed that turf grass samples were divided into Zoysia japonica and Zoysia sinica in a species-dependent manner. PCA and PLS-DA from FT-IR spectral data of Zoysia species identified and unidentified by molecular markers successfully divided the 49 turf grasses into Z. japonica and Z. sinica. In particular, PLS-DA and the HCA dendrogram could mostly discriminate the 47 Z. japonica grasses into two groups depending on their origins (mountainous areas and island area). Considering these results, we suggest that FT-IR fingerprinting combined with multivariate analysis could be applied to discriminate between Zoysia species as well as their geographical origins of various Zoysia species.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• Korean Security Journal
• /
• no.11
• /
• pp.21-36
• /
• 2006

This study aims to grasp the general conditions regarding university students in security related majors in Korea. Followings will be covered here: what motivated them to choose those majors, how much are they satisfied with major curriculum course after matriculation, whether they got jobs through the education, what is their consciousness on their majors, jobs, and courses like, and what effects their job preference. And this study also aims at helping the students with their future plans such as admission to a school of higher grade and choosing their job. For this study, we distributed 340 cpoies to the students in security related majors at 4 four-year colleges and 1 two-year college, and collected 298 copies by means of quota sampling method. For collected questionnaires, we used individual T-test verification and one-way ANOVA analysis to grasp the situation. Significance standard for the test results was set as p<0.05. Following are the test results. First, the analysis on students' satisfaction rate resulted in male students' average of 2.42, compared to female students' average of 2.10, which shows female students have higher satisfaction rate in choosing their majors than male students. Secondly, The results on analysis of satisfaction rate on their curriculums, classes, and majors show that students in security-related majors showed different satisfaction rate and different averages according to their sex and the year of the college. The study indicates that males have higher satisfaction rate on curriculum than females, with male students' average of 2.63 and female students' average 2.88. According to the year of the college, there was a significant difference statistically, Statistics show that students at two-year college have higher satisfaction rate than those at four-year college, with two-year college students' average of 2.48 and four-year college students' of 2.74. students have the average of 3.56. The higher year they were in, the more improvement the curriculum required. When it comes to convenience offer for employment, male students expected more from school than female students, with males' average of 2.74 and females' average of 4.07. Male students marked higher than female students in the extent of job information offer, with males' average of 2.96 and females' average of 2.59. Fourthly, when students in security-related majors were surveyed on their consciousness of their future plans such as getting jibs, two-year college students had more certificates of qualification for employment than four-year college students. What they do preponderantly in preparation for employment was studying foreign languages, which took up 40.4%. And when they were asked on their confidence for employment, positive answers were far more than negative ones with the percentage of 39.6%, while negative took up just 14.0%. Fifthly, when it come to the students in security-related students' job preferences, 49.2% preferred safe job conditions in public security area and 34% preferred private guard or private security organizations. And in the public security area, the highest percentage of 28.6 preferred to work in presidential security service. In the area of private security, 21.2% showed interests in private guard and private security organizations.

• Journal of Korea Soil Environment Society
• /
• v.2 no.3
• /
• pp.3-21
• /
• 1997

The remediation of contamiated sites using currently available remediation technologies requires long term treatment and huge costs, and it is uncertain to achieve the remediation goal to drop contamination level to either back-ground or health-based standards by using such technologies. Intrinsic remediation technology is the remediation technology that relies on the mechanisms of natural attenuation for the containment and elimination of contaminants in subsurface environments. Initial costs for the intrinsic remediation may be higher than conventional treatment technologies because the most comprehensive site assessment for intrinsic remediation is required. Total remediation cost, however may be the lowest among the presently employed technologies. The applicability of intrinsic remediation in the contaminated sites should be theroughly investigated to achieve the remedial goal of the technology. This paper provides the frame of the extended site assessment procedure based on knowledge of biodegradability to evaluate the applicability of intrinsic remediation. This site assessment procedure is composed of 5 steps such as preliminary site screening, assessment of the current knowledge of biodegradability, selecting the appropriate approach, analyzing the contaminant fate and transport and planning the monitoring schedule. In the step 1, followings are to be decided 1) whether to go on the the detailed assessment or not based on the rules of thumb concerning the biodegradability of organic compounds, 2) which protocol document is selected to follow for detailed site assessment according to the site characteristics, contaminants and the relative distance between the contamination and potential receptors. In the step 2, the database for biodegradability are searched and evaluated. In the step 3, the appropriate biodegradability pathways for the contaminated site is selected. In the step 4, the fate and transport of the contaminants at the site are analyzed through modeling. In the step 5, the monitoring schedule is planned according to the result of the modeling. Through this procedure, users may able to have the rational and systematic informations for the application of intrinsic remediation. Also the collected data and informations can be used as the basic to re-select the other remediation technology if it reaches a conclusion not to applicate intrinsic remediation technology at the site from the site assessment procedure.