• Title/Summary/Keyword: 중량 감소율

Search Result 694, Processing Time 0.03 seconds

Desalination of Boiled Oyster Extract by Electrodialysis (전기투석에 의한 굴자숙액의 탈염 특성)

  • 박표잠;이상훈;김세권
    • KSBB Journal
    • /
    • v.15 no.2
    • /
    • pp.167-173
    • /
    • 2000
  • For selective elimination of salt from boiled oyster extract (BOE), electrodialyzer was used and the desalination conditions of B BOE were investigated. The ion-exchange membrane with a molecular weight cut off 100 Da was used for desalting of B BOE. The desalination efficiency at pH 4.0 was 13% higher than that at pH 9.0 when BOE was desalted for 90min. The e electrodialysis pro$\infty$ss could remove above 90% of the initial salt content when 5% BOE was desalted at pH 5.62 for 1 100min. The initial volume and concentration of permeation solution did not have significant effects on desalination time and r ratio. The important factors for the desalination of BOE were found to be pH and concentration of BOE. The results obtained prove that electrodialysis is a practical solution to the problem of selective elimination of salt from BOE.

  • PDF

Combustion Characteristics of Useful Imported Woods (국내 유용 해외 목재 수종의 연소특성 평가)

  • Seo, Hyun Jeong;Kang, Mee Ran;Park, Jung-Eun;Son, Dong Won
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.1
    • /
    • pp.19-29
    • /
    • 2016
  • The purpose of this study is to analyze the combustion and thermal properties in order to establish baseline data for the fire safety evaluation of imported wood. The combustion properties such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter test according to KS F ISO 5660-1 and thermogravimetric analysis (TGA). Analyzed species are five kinds of species as Merbau, Mempening, Garo Garo, Malas, and Dillenia. The heat released rate values showed the highest value of Malas as $375.52kW/m^2$, and Dillenia showed the lowest value as $133.30kW/m^2$. The data values were confirmed in the following order: Malas > Mempening > Garo Garo > Merbau > Dillenia. In case of the total heat release, it was measured in the following order: Mempening > Malas > Garo Garo > Merbau > Dillenia. The gas analysis results were that Dillenia showed the highest value of 0.034. Also, Mempening and Malas showed the lowest at 0.020 in the $CO/CO_2$. Min of mass reduction was shown as 74.79% Sargent cherry, on the other hand, Malas had a 83.52%. It showed a correlation between and of the CO and $CO_2$ generation and combustion characteristics of wood. The thermal decomposition temperature of the wood in the TGA were as follow that Merbau $348.07^{\circ}C$, Mempening $367.57^{\circ}C$, Garo Garo $350.59^{\circ}C$, Malas $352.41^{\circ}C$, Dillenia $364.33^{\circ}C$. The aim of this study is to determine the combustion properties of imported wood according to ISO 5660-1. And, based on the results of this study, we would proceed with further research for improving the fire safety of wood for construction.

Investigation on the Characteristics Variation According to Air Supply Capacity in Layer Manure by Composting (공기공급량에 따른 산란계분의 퇴비화 특성변화에 관한 연구)

  • Kwag, J.H.;Cho, S.H.;Jeong, K.H.;Kim, J.H.;Choi, D.Y.;Jeong, Y.S.;Jeong, M.S.;Kang, H.S.;Ra, C.S.
    • Journal of Animal Environmental Science
    • /
    • v.16 no.2
    • /
    • pp.135-142
    • /
    • 2010
  • The composting of layer manure is economical and efficiently process. In this study, the variation of composting characteristics in layer manure was investigated according to air supply capacity. The fermented compost was added in layer manure and mixed with sawdust inside composting reactors. The level of air supply capacity was varied in the range of $50{\sim}200\;{\ell}/m^3/min$. During composting the temperature variations of composting piles was different the temperatures of composting piles for T-1 ($50\;{\ell}/m^3/min$) and T-2 ($100\;{\ell}/m^3/min$) were reached at $40^{\circ}C$ and $50^{\circ}C$ within 2 days, respectively. For T-3 ($150\;{\ell}/m^3/min$) and T-4 ($200\;{\ell}/m^3/min$), their temperatures was $60^{\circ}C$ within same days and maintained during 8 days. Water contents decreased according to the air supply capacity; 8.9%, 15.4%, 18.0% and 18.6% for T-1, T-2, T-3 and T-4. The weight ratios of T-1, T-2, T-3 and T-4 were reduced to 12.8%, 15.6%, 18.1% and 17.9%, respectively. The decreasing volumetric ratios of T-1, T-2, T-3 and T-4 were 18.0%, 21.0%, 22.3% and 22.0%. The oxygen discharge concentrations during composting were 12 ppm for T-1, T-2 and 9 ppm for T-3 and T-4. After composting, fertilizer components such as total nitrogen (TN) and phosphorous pentoxide ($P_2O_5$) were examined at each air supply capacity. Nitrogen contents of the T-1, T-2, T-3 and T-4 were 0.75%, 0.74%, 0.72% and 0.64%. Also, The contents of $P_2O_5$ were 0.35%, 0.40%, 0.38% and 0.42% for T-1, T-2, T-3 and T-4.

Effect of Nitrogen component and Ge Composition on Growth in the Cultivation of ICT-based Ginseng Process (ICT 기반의 인삼 공정 육묘 시 질소 형태와 게르마늄(Ge) 유무가 생장에 미치는 영향)

  • Dong Hyun, Kim;Yeon Bok, Kim;Hyun Jung, Koo;Hyun Jin, Baek;Su Bin, Lee;Jeei Hye, Choi;Eui Gi, Hong;Kwang Jin, Chang
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.24 no.4
    • /
    • pp.11-17
    • /
    • 2022
  • Ginseng hydroponic cultivation was cultivated as a nutrient solution and the growth was investigated 60 days later. The length(cm) increased from EC1.0 and EC2.0 concentrations to 5.47cm before, followed by EC0.5, 2.5, 1.5, and 0.0. The weight(g) increased from EC1.0 concentration to 2.39g before, followed by EC1.5, 2.5, 0.5, 0.0 and 2.0. The width(mm) increased from EC1.0 concentration to 1.9mm than before, followed by EC2.5, 0.5, 1.5, 2.0, and 0.0. In the ginseng growth experiment according to nutritional components, the average length of NO3-N mixed experiment increased to 0.33cm, the average weight of 0.04g, and the average width of 0.35mm. In the experiment in which NH4-N was mixed without NO3-N, the growth was reduced to 0.37cm in average length, 0.03g in average weight, and 0.22mm in average width. In an experiment in which germanium(Ge) is mixed with a nutrient component, the average length is increased to 0.33cm, the average weight is increased to 0.04g, and the average width is increased to 0.35mm, but in an experiment excluding germanium(Ge), the growth is reduced to 0.11cm, the average weight is 0.04g, and the average width is 0.03mm.

Effects of the time, and the rate of potassium fertilization at nursery stage on the rooting activity in paddy rice plant (수도(水稻)의 발근(發根)에 미치는 묘대가리시용(苗垈加里施用)의 영향(影響))

  • Lee, E.W.;Lee, C.Y.;Kwon, Y.W.
    • Applied Biological Chemistry
    • /
    • v.9
    • /
    • pp.119-124
    • /
    • 1968
  • In order to learn the effect of timing and rate of potash fertilization in the rice plant nursery on the root growth and the vegetative growth of later stage a pot experiment was carried out employing 'Jaekun' a rice variety. Potassium Chloride was applied at the rate of $0{\sim}100g\;K_{2}O/3.3m^2$ right before, and 30 days after seeding. Forty-day old seedlings were transplanted three times successively at the one week intervals with the roots cut each time. Each subject was observed in rooting and other useful traits. A part of seedlings after the third root scission were cultured intact thereafter and the yield characters examined. The results were shown as: 1. The rate of sound seedlings was high in the case that a small amount of potassium was applied as the basic placement while the application of the fertilizer over $75g/3.3m^2$ (as $K_{2}O$) yielded a far less crops. 2. The plant height, number of tillers, number of leaves, and grass weight increased as the amount of potassium was elevated. However, the application of $50g\;K_{2}O/3.3m^2$ in the basic placement and that of $75g\;K_{2}O/3.3m^2$ were the peaks over which the above mentioned characters were weakened. 3. As the amount of potassium was increased the increment in number of rooting was notable, especially when the scission of roots was repeated within the limit of $50{\sim}75g\;K_{2}O/3.3m^2$. 4. In the maximum root newly shooted length indicated was about the same tendency although no statistical significance was observed. 5. The plant height, number of tillers, and variation of weight between grass and root indicated a similar tendency as the number of root shoot. 6. The differences in number of ears, grain yield, and weight of straw between the treatments were not so great but showed somewhat similar trend as in the growth of transplanted plants. In the treatment-100g $K_{2}O/3.3m^2$ the yield (ears, grain and straw) decreased as in the non-fertilized.

  • PDF

Effects of Dietary Supplementation of Mixed Probiotics on Production Performance and Intestinal Environment in Broiler Chicken (혼합 생균제의 사료 내 첨가 급여가 육계의 생산성과 장내 환경에 미치는 영향)

  • Oh, Seong Taek;Kang, Chang Won;Kim, Eun Jib
    • Korean Journal of Poultry Science
    • /
    • v.41 no.2
    • /
    • pp.143-149
    • /
    • 2014
  • This study was conducted to investigate the effects of dietary supplementation of the mixture of probiotics (MP) on growth performance, size of small intestine, cecal microflora and ammonia concentrations in broiler chicks. A total of 700, one-day-old male broiler chicks were randomly allotted to four treatments with seven replications having 25 birds per pen. The birds were fed one of the four experimental diets; containing no antibiotics nor MP (negative control, NC), containing antibiotics without MP(positive control, PC), negative control with MP 0.1% and negative control with MP 0.2% for 5 weeks. During overall experiment, birds in PC and MP treatments had higher final BW and daily BW gains than birds in NC treatments; however, the significance was not identified. The feed conversion ratio of the chicks fed the diet containing MP was significantly improved as compared to those fed the NC diets. The weights of jejunum were increased by the MP (p<0.05), but weights of duodenum, ileum and length of small intestine were similar among the groups. Birds in PC treatment showed lower populations of total microbes and lactic acid bacteria than other groups (p<0.05), cecal ammonia concentrations of the chicks fed the diet containing MP were significantly decreased as compared to those of NC and PC (p<0.01). In conclusion, MP added to the broiler diets improved the feed conversion rate and reduced cecal ammonia concentration.

Ectomycorrhizal Development and Growth of Pinus thunbergii Seedlings Inoculated with Pisolithus tinctorius(KJ-1) in Copper Treated Soil (Cu를 처리(處理)한 토양(土壤)에서 Pisolithus tinctorius균(菌)을 접종(接種)한 곰솔유묘(幼苗)의 외생균근발달(外生菌根發達)과 생장(生長))

  • Oh, Kwang In;We, Kye Moon
    • Journal of Korean Society of Forest Science
    • /
    • v.85 no.2
    • /
    • pp.329-339
    • /
    • 1996
  • This study is to investigate the effect of mycorrhizal development, growth, nutrient absorption of P. thunbergii seedlings inoculated with Pisolithus tinctorius(Pt. KJ-1) in relation to toxic materials in soil. The concentrations on copper solution applied to the soils were 0, 40, 120, 260, 430ppm. The results are summarized as follows : 1. The germination of P. thunbergii with Pt. increased greater than without ectomycorrhizal fungi. Mycorrhizal development showed a significant decreasing trend at high concentration, and tolerant Cu test with Pt. in agar plate media showed a decreasing trend at a high level. 2. P. thunbergii seedlings inoculated with Pt. showed that the shoot length was significantly promoted at 40, 120ppm copper levels, and that of noninoculated seedlings had the lowest effect in 430ppm copper level. 3. The outer shape of ectomycorrhizal root tips after inoculating Pt. on P. thunbergii seedlings appeared as a monopodial type, a fern-like type, and a cluster-like type at 0ppm, 40ppm levels, but only monopodial type came out at 260ppm, 430ppm copper levels. 4. Root length, no. of juvenile leaves, total length of juvenile leaves, total dry weight, no. of needles and total length of needles of P. thunbergii with Pt. increased greater than those of noninoculated seedling. Growth response of P. thunbergii seedling inoculated with Pt. increased significantly at 40ppm, 120ppm Cu levels. 5. As a result of analysis of growth medium, pH, Na, CEC increased at higher Cu level, and total nitrogen, organic matters, available phosphorous, K, Ca and Mg decreased at 40ppm, 120ppm Cu levels. As a result of an analysis about a copper within soils, it appeared having high Cu-concentration at 0ppm level of an inoculated Pt. and high Cu-concentration in noninoculated Pt. than in inoculated Pt. at higher level. 6. As a result of an analysis of shoot, N, P, and K-concentration were higher in noninoculated seedlings than in inoculated seedlings, and Cu-concentration was higher in inoculated seedlings than in noninoculated seedlings. The analysis of root resulted in a high N-concentration at 40ppm, 120ppm levels, in a high P-concentration in inoculated seedlings and in a high Cu-concentration in noninoculated seedlings. Cu-concentration was significantly higher at root than at shoot.

  • PDF

Mineralogical and Physico-chemical Properties of Sludge Produced During Artificial Sand Processing (국내 화강암류를 이용한 일부 인공쇄석사 제조과정에서 발생되는 슬러지의 광물.물리화학적 특성)

  • Yoo, Jang-Han;Kim, Yong-Ug
    • Journal of the Mineralogical Society of Korea
    • /
    • v.20 no.4
    • /
    • pp.303-311
    • /
    • 2007
  • The consumption of artificially crushed sands exceeds more than 30 percent of the domestic sand supply in South Korea, and its rate is still increasing. For the manufacture of crushed sand granites and granitic gneisses are preferred, fine fractions (i.e. sludge, particles finer than 63 microns) are removed by use of flocculation agents, and its amount occupy about 15 wt%. The sludges consist of quartz, feldspars, micas, chlorite/vermiculite, kaolinites, smectites and occasionally calcite. Among the clay minerals micas are usually predominant, and $14{\AA}$ minerals, kaolinites and smectites are rather scarce. Jurassic granites usually contain more kaolinites and smectites than those of Cretaceous to Tertiary granites, probably due to longer geologic ages. On the other hand, sludge from Precambrian gneiss does not contain kaolinites and smectites. Chemical analyses for the granites and their sludges show rather clear differences in most of major chemical components. Except for $SiO_2,\;Na_2O\;and\;K_2O$, all other components represent rather clear increase. Decrease of $SiO_2$ content is attributed to the relative decrease of quartz in the sludges. And the $Na_2O decrease is caused by a relatively stronger weathering property of albite compared to Ca plagioclase. The $K_2O$ content shows rather small differences throughout the whole samples. The increases of $Al_2O_3$ and other major components resulted from weathering processes and most of colored components are also concentrated in the sludges. Particle size analyses reveal that the sludges are categorized as sandy loams in a sand-silt-clay triangular diagram. The sludge is now classified as industrial waste because of its impermeability, and this result was also confirmed by rather higher hydraulic conductivities. For the environmental problems, and accomplishing effective sand manufacture, more fresh rocks with little weathering products must be chosen.

Effects of Fire Retardant Treatment on Mechanical Properties and Fire Retardancy of Particleboard and Complyboard (내화처리(耐火處理)가 파아티클보오드와 콤플라이보오드의 기계적성질(機械的性質) 및 내화도(耐火度)에 미치는 영향(影響))

  • Kwon, Jin-Heon;Lee, Phll-Woo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.13 no.4
    • /
    • pp.3-57
    • /
    • 1985
  • This research was conducted to examine the feasibility of developing fire retardant particleboard and complyboard. Particleboard were manufactured using meranti particle(Shorea spp.)made with Pallmann chipper, and complyboard meranti particle and apitong veneer (Dipterocarpus spp.). Particles were passed through 4mm (6 mesh) and retained on 1mm (25 mesh). Urea formaldehyde resin was added 10 percent on ovendry weight of particle. Face veneer for complyboard was 0.9, 1.6 and 2.3mm in thickness and spread with 36 g/(30.48 cm)$^2$ glue on one side. Veneers were soaked with 10 percent solution of five fire retardant chemicals (diammonium phosphate, ammonium sulfate, monoammonium phosphate, Pyresote and Minalith), and particles with 5, 10, 15 and 20 percent solution of five chemicals. Particleboard and complyboard were evaluated on physical and mechanical properties, and fire retardancy. The results obtained were summarized as follows. 1. Among five fire retardant chemicals treated to particleboard and complyboard, the retention of ammonium sulfate in 5 percent solution showed the lowest as 1.39 kg/(30.48 cm)$^3$ exceeding the minimum retention of 1.125 kg/(30.48 cm)$^3$ recommended by Forest Products Laboratory and Koch. 2. Particleboard and complyboard treated with diammonium phosphate showed higher modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength and screw holding power than those with the other chemicals. 3. MOR and MOE of complyboard treated with fire retardant chemicals were greater than those of fire retardant particleboard. 4. Thickness swelling of fire retardant complyboard was lower than that of fire retardant particleboard. 5. The moisture content of the boards treated with Pyresote and Minalith increased and with monoammonium phosphate reduced. 6. Fire retardant particleboard showed no ignition, and fire retardant complyboard started ignition, but time required to ignite was prolonged comparing the controlboard. Complyboard with only shell veneer treated showed ignition and lingering flame, but lingering flame time was shorter than controlboard. Complyboard with treated both core and veneer showed ignition but not lingering flame. 7. Flame length, carbonized area and weight loss were smaller than controlboard but had no significant difference among chemicals treated. 8. Temperature of unexposed surface of fire retardant particleboard was lowered with the increasing concentration of five chemicals. 9. Temperature of unexposed surface of fire retardant particleboard was lowered with the highest in Pyresote and the lowest in Minalith. 10. Temperature of unexposed surface of fire retardant complyboard was lower than that of controlboard.

  • PDF

Seed Germination, Plant Growth and Antioxidant Capacity of Limonium tetragonum under Different Salt Concentrations (염농도에 따른 갯질경(Limonium tetragonum) 종자의 발아와 식물체의 생장 및 항산화 활성)

  • Jeong, Jae-Hyeok;Hwang, Woon-Ha;An, Sung-Hyun;Jeong, Han-Yong;Lee, Hyeon-Seok;Baek, Jung-Sun;Choi, Kyung-Jin;Lee, Geon-Hwi;Ra, Ji-Eun;Chung, Nam-Jin;Lee, Seung Jae;Yun, Song Joong
    • Korean Journal of Plant Resources
    • /
    • v.30 no.4
    • /
    • pp.364-371
    • /
    • 2017
  • Limonium tetragonum is a halophyte grown naturally in the coastal region in South Korea. This study was conducted to investigate the effects of salt concentrations on seed germination, seedling growth, and antioxidant capacity of L. tetragonum. Seeds were collected from naturally grown plants of L. tetragonum and those at full maturity were used in this experiment. All experiments were performed at 0%, 0.5%, 1.0%, or 2.0% of salt concentrations. Seed germination rate was highest as 86% at $20^{\circ}C$ and followed as higher in order of $25^{\circ}C$, $30^{\circ}C$ and $15^{\circ}C$. The germination rate was about 80% at 0% or 0.5% of salt concentration, but it was very low at the salt concentrations higher than 1%. Growth of L. tetragonum seedlings showed no difference in Hoagland solution containing NaCl in the range of 0% to 1.0% and seedlings survived at 2.0% of NaCl concentration. As the salt concentration increased, the content of $Na^+$ in the shoot increased, but that of $K^+$, $Ca^{{+}{+}}$, or $Mg^{{+}{+}}$ decreased. The antioxidant activity and the content of total polyphenol and total flavonoid in the shoot were similar at 0% and 0.5% of NaCl and were highest at 2.0% of NaCl concentration. In conclusion, performance of seed germination and plant growth of L. tetragonum was highest at 0% and 0.5% of NaCl concentration, and showed no difference in antioxidant activity, total polyphenol contents, and total flavonoid contents at the same salt concentrations.