• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.329-332
• /
• 2003

This paper the self fuel filling system was investigated in order to improve the manual system. This process can be conducted by credit cards and cash automatically even though the drivers don't know how to use a lubricator. Normal gas stations interface simple circuits not to by a lubricator so it can go side by side with self-refueling. This system give convenience for drivers and decrease oil price reducing handwork for gas station. This effect will be able to strengthen outside competitive power of gas station.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.91-93
• /
• 2011

본 논문은 영상처리 및 센서를 이용하여 주유할 차량으로 이동, 주유구 인식 및 개폐, 주유까지의 과정을 처리할 수 있는 무인 주유 로봇의 구현 과정을 기술하였다. 캐터펄트는 자동차가 주차된 곳에 정확히 멈추게 되고, 로봇 팔이 영상 처리를 이용하여 주유구 위치를 찾아낸 뒤 주유를 시작한다. 로봇은 현 주유 시스템의 불편한 점을 사람 없이 전 과정을 처리하는 역할을 함으로써 주유소를 무인화하여 인건비를 최소화 시키고, 악천후 상황에서 주유의 편리성을 기대할 수 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.66-76
• /
• 2011

The Sightseeing ITS is defined as a system that gives tourists and inhabitants the information concerned with road network conditions, parking, sightseeing spots, and travel time in the relevant area. When focusing on tourists' excursion behaviors in sightseeing areas, however, it is sometimes found that they feel much annoyed with insufficient information about the area. While they also have a variety of needs to get information and make a decision about their excursions, it becomes one of important subjects to understand the actual circumstances of their information usage and to identify the causal relationship between their excursion patterns and the obtained information. This paper aims to investigate basic issues toward development of Sightseeing ITS and to modify an analytical model of tourist's excursion behavior considering information usage at Fuji five lakes Area, which is a representative sightseeing place in Japan. The relationship was analyzed using a structural equation model: information usage at the scheduling stage has an impact on tourists' individual cognition of the sightseeing area, tourists' individual cognition affects information usage at the excursion stage, and information usage at the excursion stage affects behavior during excursions. It is found that tourists' decision making behaviors on their excursion tend to depend on the information usage. This implies essential results to construct effective and customer oriented ITS.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.3
• /
• pp.80-85
• /
• 2011

The air in the fuel tank could cause oxidation of fuel during storage, and it also reduced the fuel transfer performance. To find better procedure for refueling of aircraft fuel tank, the vacuum refueling process was proposed to reduce the air in the fuel tank. In this study, the vacuum refueling process was established and tested, it could be helpful to find out what happened during vacuum refueling. Also the revised vacuum refueling process was proposed to reduce the air and refueling time.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.385-390
• /
• 2011

The air remained in the fuel tank could cause oxidation of fuel during storage, and it also reduce the fuel transfer performance. To find better procedure for refueling of aircraft fuel tank, the vacuum refueling process was proposed to reduce air in the fuel tank. In this study, the vacuum refueling process established and tested, it could be helpful to find out what happened during vacuum refueling. Also the revised vacuum refueling processes were proposed to reduce the remained air and refueling time for aircraft fuel tank.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.56-61
• /
• 1995

균일한 속도를 갖는 주유동장에 연료를 분사하였을때 분사된 연료가 주유동장의 공기와 혼합되는 정도를 정량적으로 설명하기 위하여 실험과 수치 계산을 실시하였다. 본 연구에서는 혼합 진전 정도를 나타내기 위하여 혼합진전변수(mixing progress variable)를 도입하여 유동조건에 따라 혼합 정도를 정량적으로 비교하였다. 주유동 속도가 일정할때 분사 속도를 증가시키면 연료가 주유동장의 공기와 혼합이 촉진됨을 알 수 있었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.56-63
• /
• 1998

The present study investigated local heat transfer characteristics around a film cooling hole with variations of free stream turbulence intensity The film cooling jet is injected through a single hole inclined at $30^{\cire}$ to the surface and laterally at $45^{\cire}$ for the blowing rates of 0.5, 1.0 and 2.0. Turbulence generating grids are used at upstream of the film cooling hole to change the turbulence intensity of free stream. Free stream turbulence intensity without grids is 0.5%. Two different turbulence generating grid is installed at different at locations upstream of the film cooling hole so that turbulence intensity of free stream varies from 3% to 10%. The naphthalene sublimation technique has been employed to determine local heat/ mass transfer coefficients. With low free stream turbulence intensity, heat/mass transfer augmented area by coolant or free stream is distinguished evidently. However, when free stream turbulence intensity is high, heat transfer is enhanced in all region and heat transfer enhanced regions are not clearly divided due to vigorous mixing of coolant and free stream. The peak values of heat/mass coefficients are decreased and the distributions of heat/mass transfer coefficients are more uniform with high turbulence intensity. The effect of turbulence intensity on heat transfer characteristics is more evident as blowing rate is higher.

• Journal of the Korean Institute of Gas
• /
• v.18 no.3
• /
• pp.44-52
• /
• 2014

Small petrol stations have great potential for a wide distribution in metropolitan area in which the land value possesses primary installation cost of the facility. The objective of the present study is to propose appropriate facility regulations of small petrol stations in Korea that can be popularly installed in the future in terms of securing safety in addition to serviceability. The hazard analysis and damage prediction from the possible fire and explosion accidents were performed using a software, PHAST v.6.5. As essential components of the facility regulations proposed in this study, the regulations about the refueling lot, maximum capacity of underground tank, location of fixed refueling facilities, height of firewall for small petrol stations were subsequently compared with those for regular-sized petrol stations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.909-916
• /
• 2006

This study investigates tourists' sightseeing excursion behaviors and their information usage patterns at Fuji five lakes Area. This paper aims to empirically analyze the relationship between a sightseeing excursion behavior and use of tourist information applying a cluster analysis and a quantitative regression model. The main results are summarized as follows: (1) Tourists' information need is high about 90% of all tourists get information, 80% get the information before travel, 70% on the journey, 60% at the same time. (2) The patterns of information usage are categorized into 3 groups by the timing when tourists try to get the information.(3) There exists a difference among the time-spatial characteristics of excursion's behaviors such as the time after arriving time at sightseeing area, the time till go to home, duration time, and the total travel time between spots, the number of spots, and the size of excursion scale. (4) The quantitative regression model shows that information usage which constrained by time and space significantly determines both the number of the sightseeing spots and the duration time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.68-75
• /
• 2005

The effects of the physical properties of primary flow on the performance of a supersonic ejector were investigated. Axisymmetric annular injection type supersonic ejector was used for the study of the effects of molecular weight and the specific heat at constant pressure on the ejection performance. Test gases include; air, $CO_{2}$, Ar, $C_{3}H_{8}$, and $CCl_{2}F_{2}$ for different values of gas properties. As the molecular weight and CP of the primary gas increase, the secondary flow pressure increases at the same primary stagnation pressure and this behavior results from the combined effects of molar specific heat or specific heat ratio.