• Journal of Chest Surgery
• /
• v.29 no.6
• /
• pp.639-645
• /
• 1996

A 14-year-old male patient with previous surgical repair of tetralogy of Fallot was admitted with hemodynamically significant ventricular tachycardia (VT). On preoperative electrophysiologic study (EPS), the morphology of documented VT was RBBB of vertical axis with 320 msec cycle length. The endocardial mapping during VT delineated the origin of VT at right ventricular outflow tract (RVOT), where the patch was attached. The clinical VT had a clockwise reentry circuit around the patch with the earliest activation at the same site seen during the preoperative EPS. The previously placed right ventricular outflow patch and fibrous tissue were removed. During a postoperative EPS, it was no longer possible to induce the VT. Ventricular tachycardia following repair of tetralogy of Fallot seen in this patient was caused by a macro-reentry around the right ventricular outflow patch. We were able to ablate the VT with the aid of a detailed mapping of its epicardial activation sequence.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.110-120
• /
• 2005

For utilizing vitrification to treat low and intermediate level waste, industrial pilot plant was designed and constructed in October 1999 at Daejon, Korea through the joint research program among NETEC, MOBIS and SGN. More than 70 tests were performed on simulated IER, DAW etc. including key nuclide surrogate(Cs, Co); this plant has been shown to vitrify the target waste effectively and safely, however, some dust are generated from the HTF(High Temperature Filter) as a secondary waste. In case of long term operation, it is also concerned that pipe plugging can be occurred due to deposited dust in cooling pipe namely, connecting pipe between CCM(Cold Crucible Melter) and HTF. In this regard, we have developed the special complementary system of the off-gas treatment system to recycle the dust from HTF to CCM and to remove the interior dust of cooling pipe. Main concept of the dust recycling is to feed the dust to the CCM as a slurry state; this system is regarded as of an important position in the viewpoint of volume reduction, waste disposal cost and glass melt control in CCM. The role of DRS(Dust Recycling System) is to recycle the major glass components and key nuclides; this system is served to lower glass viscosity and increase waste solubility by recycling B, Na, Li components into glass melt and also to re-entrain and incorporate into glass melt like Cs, Co. Therefore dust recycling is helpful to control the molten glass; it is unnecessary to consider a separate dust treatment system like a cementation equipment. The effects of Dust Cleaner are to prevent the pipe plugging due to dust and to treat the deposited dust by raking the dust into CCM. During the pilot vitrification test, overall performance assessment was successfully performed; DRS and Dust Cleaner are found to be useful and effective for recycling the dust from HTF and also removing the dust in cooling pipe. The obtained operational data and operational experiences will be used as a basis of the commercial facility.

• Journal of Embryo Transfer
• /
• v.21 no.2
• /
• pp.147-156
• /
• 2006

The objective of this study was to supply excellent genetic resources to livestock farms by transferring embryos produced by genetically superior Korean cows (Hanwoo). Eighty Hanwoo donors were superovulated with gonadotropin ($Folltrpin^(R)\;or\;Antorin^(R)$) for 4 days combined with or without progesterone releasing intravaginal device (CIDR) insertion. The collected fresh or frozen-thawed embryos were transferred to 226 farm recipients. In this study, the effect of CIDR insertion in combination with gonadotropin ($Folltrpin^(R)$) treatments initiated at the random stage of estrous cycle on embryo production was evaluated and compared to conventional superovulation protocol. Moreover, the effect of gonadotropin ($Antorin^(R)$) dose in CIDR-treated Hanwoo donors on the embryo yield was determined. In addition, the effects of embryos (fresh vs. frozen-thawed), embryo transfer person, seasons and farms on the pregnancy rate were evaluated. In Hanwoo donors, CIDR insertion in combination with $Folltrpin^(R)$ treatments regardless of estrous detection resulted in increased numbers of total ova (6.5 vs. 5.8) and transferable embryos (3.9 vs. 3.2) compared to the conventional superovulation protocol (p<0.01). In CIDR-treated Hanwoo donors, the higher dose of $Antorin^(R)$ (36 vs. 28 mg) resulted in the increased number of transferable embryos (8.3 vs. 5.4, p<0.05). The embryos (fresh 43.9% vs. frozen-thawed 23.1%) and embryo transfer person (53.9 vs. $0{\sim}16.7%$) significantly affected the pregnancy rate after embryo transfer (p<0.01). These results suggest that CIDR-based superovulation protocol may be effectively used for production of superior Hanwoo embryos and, multiple ovulation and embryo transfer in Hanwoo might be effectively applied for livestock improvement if pregmancy rate with frozen-thawed embryos and embryo transfer skill would be improved.

• Journal of Embryo Transfer
• /
• v.21 no.3
• /
• pp.217-223
• /
• 2006

This study was carried out principally to obtain the basic data for the improvement of the reproductive performance and production using plasma progesterone assay and ultrasonography in dairy cow. The results obtained from this studies were as follows. The results of reproductive examination in 85,983 cows were ovarian diseases 40,399 (47.0%), uterine diseases 11,912 (13.9%), pregnancy or pregnant failures 26,587 (30.9%), adhesion of reproductive tracts 172 (0.2%), freemartin 8 (0.01%), and others 6,905 (8.3%), respectively. The treatment status of reproductive dysfunction in 30,241 cows were silent heat or error of estrus detection 14,909 (49.3%), follicular cysts 3,750 (12.4%), luteal cysts 907 (3.0%), inactive ovaries 665 (2.2%), granulosa cell tumor of ovary 3 (0.01%) and endometritis 6,986 (23.1%), respectively. The indices of reproductive efficiency after the periodical examination of reproductive status were as follows; the mean intercalving inteual was reduced from 475 days at the first examination to 381 days at the last examination of reproductive status, the mean interval calving to conception was reduced from 186 to 98 days, the mean interval calving to first service was reduced from 106 to 66 days, the cows showing heat by 60 days postpartum were increased from 32 to 90%, the mean conception rate to first service was increased from 42 to 64%, and the mean service per conception was reduced from 2.6 to 1.8 times, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.92-98
• /
• 2012

Purpose: The aim of this study was to evaluate the effects of different abutment materials on abutment screw loosening and settling-down effect in conical connection type implant system. Materials and methods: Three types of abutment, cementation, gold UCLA, and metal UCLA abutment were used. Two UCLA groups were fabricated in a similar pattern to cementation abutment. Type III gold alloy and Nickel-Chromium alloy was used for casting gold UCLA abutment and metal UCLA abutment, respectively. Fixture and abutment were tightened to 30 Ncm by using digital torque controller and re-tightening was conducted with same force after 10 minutes. Digital torque gauge was used to measure loosening torque and fixture/abutment length was measured by digital micrometer. Dynamic loads between 25 N and 250 N were applied with $0^{\circ}$ angle to the abutment axis. After loading, fixture/abutment length was re-measured and amount of settlement was calculated. Loosening torque value was also measured for comparison Results: All three groups showed significant differences of length when comparing before and after loading, but there was no significant difference of settling amount in all groups. Loosening torque values were significantly decreased when comparing before and after loading in all groups($P$<.05). However, there was no significant difference in loss of loosening torque values when compared to groups. Conclusion: In internal conical connection type implants, dynamic load affected on settlement and loosening torque of implant, but there was no differences between abutments materials. Likewise gold UCLA abutment, metal UCLA abutment might be able to withstand functional load.

• Journal of Life Science
• /
• v.18 no.1
• /
• pp.120-128
• /
• 2008

The death ligand tumor necrosis factor-related apoptosis-inducing ligand (TRAIL)/ Apo1L is a cytokine that activates apoptosis through cell surface death receptors. TRAIL has sparked growing interest in oncology due to its reported ability to selectively trigger cancer cell death. Euphorbiae humifusae Wind has been used in traditional Oriental medicine as a folk remedy used for the treatment of cancer. However, the mechanism responsible for the anticancer effects of E. humifusae not clearly understood. Here, we show that treatment with subtoxic doses of water extract of E. humifusae (WEEH) in combination with TRAIL induces apoptosis in TRAIL-resistant human gastric carcinoma AGS cells. Combined treatment with WEEH and TRAIL induced chromatin condensation and sub-G1 phase DNA content. These indicators of apoptosis were correlated with the induction of caspase activity that resulted in the cleavage of poly (ADP-ribose) polymerase. Combined treatment also triggered the loss of mitochondrial membrane potential. Furthermore, co-treatment with WEEH and TRAIL down-regulated the protein levels of the anti-apoptotic proteins such as Bcl-2, Bcl-xL, XIAP and cIAP-1. Although more study will be needed to examine the detailed mechanisms, this combined treatment may offer an attractive strategy for safely treating gastric adenocarcinomas and the results provide important new insights into the possible molecular mechanisms of the anticancer activity of E. humifusae.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.52-63
• /
• 2009

Recently in Korea, in the case of metropolis, the urban signalized intersections are controlled by traffic information center or ITS center. Cheon-an City also established traffic information center through the 1st.-$\sim$3rd. ITS public construction and has managed this center that includes bus information service, traffic information collection and providing service, parking information service, and traffic responsive control system. In the Cheon-an metropolitan traffic signal operation, traffic signal controllers were grouped by the each main traffic flow axes and performed with coordinated signal timing for the signalized arterials, and also cycle and split changed by realtime traffic demands. Cheon-an urban traffic responsive control system was evaluated by intersection delay and speed, then it was verified that the delay decreased and vehicle speed improved. However, the rural signal control system to connect adjacency town was evaluated to have lower status than urban area due to the unimproved TOD (Time of day) plan. Therefore actuated signal control was examined for substitutive control system in isolated signal intersection. The aim of this article is to compare actuated signal control with TOD mode in the rural intersection of Cheon-an and to fine superiority of these two control mode, with evaluation of vehicle delay by using HCM(2000) method and by micro-simulation CORSlM. The result of field test show that actuated signal control gave better performance in delay comparison than the existing TOD signal control. And simulation outcome verified that non-optimized TOD has higher delay than optimized TOD mode, non-optimal actuated mode, and optimal actuated signal control mode. Particularly, these three modes delays had not different values according to the paired sample t-test. This is because small traffic demands were loaded in each links. This suggested actuated signal control is expected to be more effective than TOD mode in some rural isolated intersections which frequently need to survey for traffic volume.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.1
• /
• pp.76-84
• /
• 1999

Objectives: A number of studies have shown that sleep deprivation results in reduced vigilance and increased negative affects such as tension, depression and anger. However there are few studies about effects of sleep deprivation on anxiety. The purpose of this study was to investigate the effects of 40 hour sleep deprivation on state anxiety, affects, sleepiness and fatigue. The authors also intended to study the effect of trait-anxiety on these psychological variables after sleep deprivation. Methods: Twenty nine subjects(22 men, 7 women, $24.59{\pm}1.35$ years of age) participated in this study. Subjects had no past history of psychiatric disorders and physical illnesses, and had normal sleep-waking cycle without current sleep disturbances. All of the subjects completed sleep dairy for two weeks to exclude some who suffered from chronic sleep deprivation or sleep disturbances. Subjects were instructed to get a normal sleep as usual at night before the study. After awakening, subjects remained awake for 40 hours under continuous surveillance. They completed State-Trait Anxiety Inventory, Index of General Affect, Stanford Sleepiness Scale and Fatigue Questionnaire every three hours, therefore they completed the scales 14 times totally. Subjects were dictated not to take caffeine, alcohol, or any medications on the day of the study. Heavy exercises and naps were restricted too. Results: Sleep deprivation resulted in increased state anxiety, negative general affects, and increased sleepiness and fatigue(p<.001). Dividing into high trait-anxiety group and low trait-anxiety group, there was significant sleep deprivation x traitanxiety interaction effect on general affect(p<.05). But, there was no significant sleep deprivation x trait-anxiety interaction effect on state-anxiety, sleepiness and fatigue. During sleep deprivation, the highest ratings of scales on anxiety, negative affect, sleepiness and fatigue occurred between 4 : 00AM and 7 : 00AM. Conclusions: These results show that sleep deprivation results in increased anxiety, mood state disturbance and increment of sleepiness and fatigue. These findings also suggest that trait-anxiety is a factor that influences the degree of worsening in general affect caused by sleep deprivation. During sleep deprivation, the rating curves of anxiety, affect, sleepiness and fatigue show rhythmicity that may be related to circadian rhythm.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.311-321
• /
• 1998

Background: Mucoepidermoid carcinoma of the lung arises from submucosal gland of tracheobronchial tree. Histologically, the tumor is composed of mucin-secreting cells, squamous cells, and intermediated cells, which show no particular differentiating characteristics, in varying proportions. The tumor is divided into low grade and high grade depending on the proportion of cells, and the degree of the mitotic activity, cellular necrosis and nuclear pleomorphism. While favorable prognosis of low grade tumor, high grade tumor, which is very difficult to differentiate from adenosquamous carcinoma, has an aggressive clinical course. The tumor is rare, comprising 0.1 to 0.2% of primary lung cancers and 1 to 5% of bronchial adenomas. Method: A retrospective clinical study was done on 17 cases of mucoepidermoid carcinoma. The study investigated the clinical features, radiologic findings, bronchoscopic findings, histology and clinical courses. Results: Age ranged between second to seventh decade with a mean age of 42 years. Twelve out of 17 cases were male. Five out of 17 cases were smokers with a mean 11 pack-years. Common symptoms included dyspnea, cough, hemoptysis, and wheezing. Two out of 17 cases was asymptomatic. Atelectasis or mass was common radiologic finding. Plain chest radiography was normal in one patient whom the tumor was located in upper trachea. Bonchoscopy revealed exophytic mass in 12 cases and nodular infiltrations in 4 cases. One case having solitary pulmonary nodule in the right lower lung was normal on bronchoscopy. Histologically, ten out of 17 cases were low grade, and seven out of 17 cases were high grade. Among 10 patients with low grade tumor,9 patients were performed operation and have been alive without recurrence during a mean follow-up of 30 months. Two out of 7 patients with high grade tumor were performed pneumonectomy and have been alive during a follow-up of 3 and 8 months, respectively. Conclusion: Most of mucoepidermoid carcinoma is located at central airway and is presented symptoms by mucosal irirtation. Although atelectasis or mass is common radiologic finding. chest X -ray can be normal. The histologic grading and the extent of tumor are two most important factors for prognosis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.164-173
• /
• 2009

Purpose: The purpose of this study was to evaluate the effect of abutment material on screw-loosening before and after cyclic loading. Among the different materials of abutments, zirconia and metal abutment were used. Material and methods: Two types of implant systems: external butt joint(US II, Osstem Implant, Korea) and internal conical joint(GS II, Osstem Implant, Korea) were used. In each type, specimens were divided into two different kinds of abutments: zirconia and metal(n=5). The implant was rigidly held in a special holding to device ensure fixation. Abutment was connected to 30 Ncm with digital torque gauge, and was retightened in 30 Ncm after 10 minutes. The initial removal torque values were measured. The same specimens were tightened in 30 Ncm again and held in the cycling loading simulator(Instron, USA) according to ISO/FPIS 1480. Cycling loading tests were performed at loads 10 to 250 N, for 1 million cycles, at 14 Hz,(by subjecting sinusoidal wave from 10 to 250 N at a frequency of 14 Hz for 1 million cycles,) and then postload removal torque values were evaluated. Results: 1. In all samples, the removal values of abutment screw were lower than tightening torque values(30 Ncm), but the phenomenon of the screw loosening was not observed. 2. In both of the implant systems, initial and postload removal torque of zirconia abutment were significantly higher than those of metal abutment(P<.05). 3. In both of the implant systems, the difference in removal torque ratio between zirconia abutment and metal abutment was not significant(P>.05). 4. In metal abutments, the removal torque ratio of GS II system(internal conical joint system) was lower than that of US II system(external butt joint system)(P<.05). 5. In zirconia abutments, the difference in removal torque ratio between the two implant systems was not significant(P>.05). Conclusion: Zirconia abutment had a good screw joint stability in the condition of one million cycling loading.