• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.23-31
• /
• 2004

Cadastral surveying is related to demarcating legal boundaries and areas for the sake of registering a properly on cadastral records or restoring registered boundaries on the ground. It is composed of control surveying (cadastral triangulation and supplementary control surveying) and detail surveying. Detail surveying is classified into plane table surveying by graphical cadastral map and numerical surveying by boundary point coordinates. In this study we compared the accuracy of plane table surveying with numerical surveying using Parcel Based Land Information System(PBLIS) data constructed by the cadastral map digitalization business. In conclusion the result by numerical surveying was analyzed as more accurate than the result of plane table surveying, as Root Mean Square Errors(RMSE) of graphical cadastral surveying is 0.766m and that of numerical cadastral surveying using Total Station(T/S) is 0.683m. Therefore, PBLIS data is expected to be used for surveying legal boundaries and areas in the near future.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.49-54
• /
• 2007

As digital contents based on 3D graphics are increased, the requirement for low power 3D graphic hardware for mobile devices is increased. We design a transformation engine for mobile 3D graphic processor. We propose a simplified transformation engine for mobile 3D graphic processor. The area of the transformation engine is reduced by merging a mapping transformation unit into a projective transformation unit and by replacing a clipping unit with a selection unit. It consists of a viewing transformation unit a projective transformation unit a divide by w nit, and a selection unit. It can process 32 bit floating point format of the IEEE-754 standard or a reduced 24 bit floating point format. It has a pipelined architecture so that a vertex is processed every 4 cycles except for the initial latency. The RTL code is verified using an FPGA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.411-416
• /
• 2020

Field investigations of forests are carried out by writing measured data by hand, and it is a hassle to reorganize the results after a field survey. In this study, a method using object modeling and augmented reality (AR) was applied in a test forest to increase the efficiency of a field investigations. Using a 3D laser scanner, data on were acquired 387 trees within an area of 1 ha at the study site. The coordinates, height, and diameter were calculated through object extraction and modeling of a tree. The proposed can reduce the time required to acquire data in the field and can be used as basic data for building related systems. In addition, the modeling results of trees and a survey using GNSS and AR techniques can be used check coordinates, labor, and attribute information, such as the chest height diameter of the trees being surveyed in the field. The shortcomings of the survey method could be improved. In the future, the method could greatly improve the efficiency of tree surveys and monitoring by reducing the manpower and time required for field surveys.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.1
• /
• pp.80-93
• /
• 2016

Parcel boundary demarcation in agricultural area is commonly performed by terrestrial surveying methods, which have been pointed out as drawbacks to require consuming too much time and heavy expenditure. With the developments of high performance digital aerial cameras, however, studies on cadastral boundary demarcation with an aerial photogrammetric method attract a great attention in recent years. In this paper, an approach is presented to rapidly demarcate parcel boundaries coinciding with real ground ones in agricultural areas by extracting boundaries from the high resolution aerial orthoimages based on aerial targets. In order to investigate the feasibility of the proposed method, the accuracy of coordinates and area of parcel boundaries extracted from the aerial targets appeared in orthoimages compared with that of terrestrial boundary surveying results over the selected two test agricultural areas. Aerial image data were processed taken by a ADS80 digital camera with a GSD of 8cm in Changwon region, and by a DMCII camera with a GSD of 5cm in Suwon respectively. The result shows that the accuracy of parcel demarcation using aerial images is within the tolerance limits of coordinates and areas compared with that of terrestrial surveying. The proposed method using aerial target-based high resolution aerial images is therefore expected to be usefully applied in the agricultural parcel demarcation.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.79-95
• /
• 2021

This study evaluates the applicability of determining cadastral surveying results using drone photogrammetry during the phase of determining cadastral surveying results, which is the most important stage of cadastral surveying, but known to be hardly objective and highly probable in causing a subjective misjudgment or mistake made by a surveyor. In the experiment to analyze the accuracy of boundary point extraction from drone photogrammetry results, by comparing the coordinate area of 22 parcels extracted from 2D and 3D images with the coordinate area measured from ground survey, the difference could be quantified as RMSE of 1.44m² for 2D and 0.32m² for 3D images. In addition, experiments to evaluate the determination of cadastral surveying result based on drone photogrammetry survey showed the RMSE measure of 0.346m towards N direction and 0.296m towards Y direction in comparison to the existing surveying results through data investigation. Based on these experiments, it is judged that cadastral surveying result based on drone photogrammetry can be determined without needing to conduct a location survey with an accuracy of approximately 0.3m in the graphical area, which also leads to possibility of reducing individual errors if drones images are used along with ground survey by objectifying the process of cadastral surveying results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1267-1275
• /
• 2017

This paper describes a design of cryptographic processor supporting 233-bit elliptic curves over binary field defined by NIST. Scalar point multiplication that is core arithmetic in elliptic curve cryptography(ECC) was implemented by adopting modified Montgomery ladder algorithm, making it robust against simple power analysis attack. Point addition and point doubling operations on elliptic curve were implemented by finite field multiplication, squaring, and division operations over $GF(2^{233})$, which is based on affine coordinates. Finite field multiplier and divider were implemented by applying shift-and-add algorithm and extended Euclidean algorithm, respectively, resulting in reduced gate counts. The ECC processor was verified by FPGA implementation using Virtex5 device. The ECC processor synthesized using a 0.18 um CMOS cell library occupies 49,271 gate equivalents (GEs), and the estimated maximum clock frequency is 345 MHz. One scalar point multiplication takes 490,699 clock cycles, and the computation time is 1.4 msec at the maximum clock frequency.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.1-6
• /
• 2003

The study is to automatically or semi-automatically detect the accurate contour of tumors or lesions using active contour models (Snakes) in the MRI images of the brain. In the study we have improved the energy-minimization problem of snakes using dynamic programming and have utilized the values of the canny edge detector by the image force to make the snake less sensitive in noises. For the extracted boundary, the inside area, the perimeter and its center coordinates could be calculated. In addition, the multiple 2D slices with the contour of the lesion wore combined to visualized the shape of the lesion in 3D. We expect that the proposed method in this paper will be useful to make a treatment plan as well as to evaluate the treatments.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.371-376
• /
• 2006

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously. The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the technique of the spatial information system using computer. Using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D modeling of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for digital elevation model generation.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.95-100
• /
• 2008

3차원으로 구성되어 있는 실세계를 보다 효과적이고 신속하게 모니터링하기 위해서는 변화된 지역의 정확한 위치정보 획득과 변화 결과의 빠른 도출을 위한 자동화 방안이 필요하다. 일반적으로 변화탐지를 위해 사용되어 온 항공사진이나 위성영상은 자료 획득에 있어 날씨와 같은 자연환경의 영향을 많이 받으며, 자동으로 변화탐지를 수행하는데 많은 문제점을 안고 있다. 반면에 항공 LiDAR 시스템은 영상시스템과는 달리 날씨 등에 영향을 상대적으로 적게 받으며, 지형지물에 대한 3차원 좌표 정보를 직접 획득하기 때문에 자동으로 처리하기에 매우 효율적이다. 본 연구에서는 항공 LiDAR 데이터만을 이용하여 도시지역의 시공간적 변화를 자동으로 탐지하는 방법을 연구 하였다. 변화탐지의 대상이 도시지역이므로 객체를 기반으로 다양한 변수를 사용하여 변화탐지를 수행하였다. 연구에 사용된 데이터는 서로 다른 시기에 획득된 항공 LiDAR 데이터이며, 두 데이터간의 변화탐지를 위해 먼저 상호정합을 수행하였으며, 개별 객체를 추출하기 위해 필터링과 Grouping 과정을 수행하였다. 마지막으로 Grouping된 객체를 대상으로 모양, 면적, 높이 변화를 비교하여 변화를 탐지하였다. 객체의 외곽선과 내부 영역의 모양을 표현하는 형상계수를 사용하므로 수평방향의 객체에 대한 기하학적인 모양 변화를 탐지할 수 있었으며, 객체의 높이값을 비교함으로써 수직방향으로의 변화도 탐지할 수 있었다. 본 연구에서 수행한 객체 기반의 변화탐지 방법은 91.67%의 전체 정확도를 획득하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.110-116
• /
• 2013

With the recent development of wireless network technologies, there have been increasing usage of variouse position base servies. Position based services basically collect position information of moving object for the utilization of them in real life. Accordingly, new index structures are required to efficiently retrieve the consecutive positions of moving objects. In the paper, we consider volume of Extended Minimum Bounding Rectangles(EMBR) to be determined by average size of range queries. We proposed the methode that split efficiently moving object with long distance between location, and split moving object for decrease searching space an Estimated-Split algorithm that minimizes the volume of MBRs is designed and simulated. Our experimental evaluation confirms the effectiveness and efficiency of our proposed splitting policy.