• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.3
• /
• pp.375-380
• /
• 2009

In this paper, a steering actuator is designed and developed for an unmanned vehicle based on magnetic marker. One of the most important component of an unmanned vehicle is a steering actuator to follow magnetic road. Thus, we develop a steering actuator using a stepping motor and adopt to a new frequency control method depended on speed of the vehicle. In order to verify the usability of the developed system, the setup of unmanned vehicle installed the designed steering actuator is tested on magnetic road.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.2
• /
• pp.111-119
• /
• 2017

This paper presents a method to determine the rear steering angle in integrated chassis control with electronic stability control (ESC) and rear wheel steering (RWS). A control yaw moment needed to stabilize a vehicle should be distributed into the tire forces generated by the ESC and RWS. Weighted pseudo-inverse control allocation (WPCA) is adopted to determine the tire forces. Four methods are proposed to calculate the rear wheel steering angle. To validate the proposed methods, a simulation is performed using a vehicle simulation software package, CarSim. The simulation results show that the proposed method for determining the rear wheel steering angle improves the performance of the integrated chassis control.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.597-602
• /
• 2012

In this paper, a manual and automatic steering system for electric vehicles capable of manned and unmanned driving is proposed. The automatic steering systems, EPS, MDPS, used in conventional engine based car includes the problem of handle lock phenomenon while driving of overloading, therefore it has a drawback to apply to manned and unmanned electric vehicles. By using electronic clutch and pulleys, the proposed manual and automatic steering mechanism was designed so that it is possible to convert from manual to automatic steering mode. To experiment the performance of the proposed steering system, we made an experimental setup of an electric vehicle. We confirmed that the proposed manual and automatic steering system was useful for manned and unmanned electric vehicles.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1156-1158
• /
• 2010

경주용 카트에 현가장치와 차동장치가 존재하지 않으므로 선회 시에 후륜 내측 바퀴가 들리도록 애커먼 조향 기구와 큰 킹핀 경사각, 캐스터으로 설계되어 있다. 경주용 카트 드라이버는 고속으로 주행하고 빠르게 선회 시가 가능하도록 충분한 기능을 보유하도록 공학적인 해석이 필요하다. 이 논문에서는 조향기구의 설계 시 가장 중요인자인 애커먼 조향 기구를 평면에서 다양한 인자에 대하여 해석하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.401-407
• /
• 2016

For high fuel economy, many kinds of unit in vehicle have been developed. In steering system, as a result, HPS(Hydraulic Power Steering) system has been replaced as EHPS and EPS system. But the structures of these systems are totally different, and that causes the uncertainty of fuel economy evaluation. Therefore we undertake to research to find results and tendency of fuel economy and energy in steering system. For accurate evaluation, we modeled different types of steering systems on same vehicle model. The simulation came into action on various driving cycle. The driving condition is designed to show standby power of pump. Results show differences of fuel efficiency and energy consumption.

• Journal of the KSME
• /
• v.33 no.10
• /
• pp.856-860
• /
• 1993

차량의 조종안정성을 해석하기 위해서는 차륜과 현가장치에 의한 비선형성과 조향장치의 동특성 등을 고려한 3차원 차량 모델을 이용하여 정상상태와 과도상태에서의 조향입력에 대한 차량 주 행역학을 해석하여야 한다. 승차감, 조향성능, 주행안정성 등의 동적성능과 현가장치의 특성관 계를 규명하기위하여 3차원 차량모델에 의한 해석과 설계변수에의 민감도 해석을 수행할 필요가 있다.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.280-282
• /
• 2008

본 논문은 자동차용 능동 전륜 조향 제어 시스템을 소개한다. 능동 전륜 조향 장치는 조향의 편의성과 안정성을 위하여 조향비를 가변하거나 유사시 능동적으로 전자 제어 유닛(Electronic Control Unit : ECU)이 액추에이터를 제어해 주는 시스템이다. 최근 전자 샤시 시스템의 개발 추세인 샤시 통합 제어 관점에서 능동 전륜 조향 장치의 역할을 설정하고 성능 만족을 위한 제어기 구조에 관하여 설명한다. 설계된 제어 시스템을 3,300cc급 대형 승용차에 적용하여 그 유용성을 검증하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.30-38
• /
• 1991

자동차의 제동장치, 조향장치, 자동 변속장치 등에 요구되는 큰 힘을 얻기 위하여 유압식 구동장치가 중량당 출력비가 높고 응답특성이 좋으며 과부하에 대한 방지기능이 간단하게 이루어 진다는 장점이 있기 때문이다. 본 고에서는 우리나라에서도 전자제어식 제동장치, 조향장치, 자동변속장치, 현가장치 등의 개발을 시도하고 있는 현 시점에서 기술축적이 가장 취약한 분야라고 볼 수 있는 자동차용 전기유압밸브의 기본적인 메카니즘에 대하여 종합적으로 소개하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1291-1297
• /
• 2014

This paper proposes integrated chassis control (ICC) with electronic stability control (ESC) and active rear steering (ARS). Direct yaw moment control is used to generate a control yaw moment. A weighted pseudo-inverse-based control allocation (WPCA) method is adopted to distribute the control yaw moment into tire forces, generated by ESC and ARS. Simulation-based tuning of variables weights in the WPCA is used to enhance the yaw moment distribution performance. Simulations using the vehicle simulation software $CarSim^{(R)}$ show that the proposed ICC is effective in improving maneuverability and lateral stability.

• The KIPS Transactions:PartA
• /
• v.17A no.1
• /
• pp.19-26
• /
• 2010

As standard of living is higher and aging society is coming, it is needed to develop transportation that is easy to use for weak person. To comply with the demands, it is started to make Bi-modal Tram that is on KRRI(Korea Railroad Research Institute)'s hands. This tram has to have good accessibility like bus, be low level from ground like subway, and park accurately so wheel chair's or passenger's foot can't fall into the gap. But Bi-modal Tram have long length, so it need development of All Wheel Steering System. The Bi-modal Tram that have all wheel steering system steer not only the first axle but also the second and third axle from the first axle or articulation angle, and velocity, and so on. At this study, we discuss AWS ECU's development process.