• Journal of Power System Engineering
• /
• v.14 no.6
• /
• pp.75-82
• /
• 2010

In this study, the topics for free-surface wave simulation, nonlinear hydrodynamic force, and the critical resonance frequency of so-called ${\tau}=U{\omega}/g$=1/4 are discussed. A high-order spectral/boundary element method is newly adapted as an efficient numerical tool. This method is one of the most efficient numerical methods by which the nonlinear gravity waves can be simulated and hydrodynamic forces also can be calculated in time domain. In this method, the velocity potential is expressed as the sum of surface potential and body potential. Then, surface potential is solved by using the high-order spectral method and body potential is solved by using the high-order boundary element method. By the combination of these two methods, the wave-making problems by a submerged sphere oscillating with forward speed under the free-surface are solved in time domain.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.2
• /
• pp.146-146
• /
• 1995

본 논문은 유도전동기의 운전조작시에 발생되는 자계변화특성에 대하여 기술하였다. 본 측정시스템은 자기적분형 자계센서, 증폭기, 능동형 적분기로 이루어졌으며, 교정실험에 대한 측정계의 주파수대역과 감도는 각각 20[Hz]∼0.234[mV/μT]이다. 유도전동기의 기동과 정상운전중에 발생하는 자계성분을 측정하였으며, 고조파 성분을 고속 푸리에 변환기법으로 분석하였다. 유도전동기의 직입기동시에는 단일성 펄스자계가 강하게 발생하였으며, 이의 피크치는 정상상태의 값보다 5배이상 크게 나타났다. 이러한 긴 과도시간과 강한 자계의 세기는 전동기의 큰 인덕턴스와 동특성에 기인된다. 유도전동기의 정상운전시에는 유도전동기의 극수에 의존하는 기본파에 대한 분조파의 자계성분이 관측되었다. 또한, 자계의 분조파 성분은 전동기의 토크 변동으로 불균일한 회전토크로 인해 생기는 맥동전류와 전압플리커에 의해서 발생하는 것으로 생각된다. 인버터구동형 유도전동기에서는 직입기동에 비하여 많은 고조파 성분이 발생되고 있었으며, 특히 전동기의 구동주파수가 낮을수록 맥동토크에 의한 전류변화로 고조파 성분은 더욱 증가하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.66-74
• /
• 1992

A panel method in the spirit of Hess & Smith(1962), and also of Dawson(1977) was developed to compute the wave resistance of a submerged, or a surface piercing, body moving in the water of finite depth. As a boundary condition on the free surface what is called the Poisson equation is used, while Yasukawa(1989) chose the Dawson equation for which the double-body flow is regarded as the basic one. In order to satisfy the boundary condition on the bottom surface automatically, the sum of a Rankine source and its image with respect to the bottom surface is chosen as the Green function, and hence the singularity is distributed only on the body and on the free surface thereby decreasing the required number of panels dramatically, compared to that of Yasukawa, without the consequential loss of accuracy. Calculations were done for a submerged sphere and for the Wigley hull, and the results are compared with other existing analytical and numerical data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.89-89
• /
• 2015

항만 및 어항 구조물을 구성하는 다양한 해안구조물은 파랑의 천수효과, 굴절, 회절, 부분반사, 해저마찰, 쇄파의 영향 등을 고려해야하며 파고 및 파향 등의 해양특성의 검토가 반드시 이루어져야 한다. 실제의 해양파가 방향스펙트럼을 갖는 다방향 불규칙파라는 것은 잘 알려져 있으며, 기존의 해안구조물의 내파설계 또는 천해역의 파랑변형 검토에 있어서도 실제 해양파에 보다 가까운 다방향 불규칙파를 이용한 수리모형실험에 의해 파랑현상을 정도 높게 재현하는 것은 매우 중요하다. 본 연구에서는 실제 해양파를 정도 높게 재현할 수 있는 다방향 불규칙파 조파장치를 사용하여 구조물 전면해역에서의 파랑스펙트럼을 재현하고, 심해에서 발달된 파랑이 천해로 진행될 때 지형에 의해 발생되는 천수변형과 구조물 주위에서 나타나는 파랑변형의 현상을 고려하여 항내로 유입되는 파랑의 분포 특성을 검토하였다. 특히, 다방향 불규칙파로 인한 항내 파고분포 특성을 검토하기 위하여 동일 파랑에 대한 규칙파 및 불규칙파랑을 조파하여 그 결과를 상호 비교하였다. 아울러, 정온수역유지를 위한 월파현상을 수리적으로 재현할 수 있는 3차원 수리모형실험 수행하여 월파현상이 항내정온도에 미치는 영향을 고찰, 해석하여 항만 시설물 계획시 안정한 정박 및 이용에 대한 가능한 정온유지여부를 검토하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2000

A panel method based on the raised panel approach is developed for the nonlinear ship wave problem of practical hull forms. For the validation of the present numerical scheme. the developed method is first applied to Series 60 hull for which the extensive experimental data are available. As practical applications. the developed method is applied to KRISO 3600 TEU container ship and KRISO 300K VLCC. With the primary emphasis on the nonlinear effects of the global wave pattern generated by the two commercial ships. the calculated wave patterns are compared and verified with the experiments of KRISO. It is found that the calculated results of the present method are quite satisfactory compared with the linear methods like Dawson's approach and Neumann-Kelvin solution.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.1
• /
• pp.17-25
• /
• 2015

The following experiments were used to evaluate the effect of seeding method and pre-emergence herbicides on weed control and the production of the $sorghum{\times}sudangrass$ [sorghum bicolor (L.) Moench] hybrid under field and in vitro conditions. Under the in vitro condition, we evaluated how different kinds of herbicides affect the rate of seed germination and the growth of early seedlings in the $sorghum{\times}sudangrass$ hybrid treated with herbicides. Simazine, alachlor, and methabenzthiazuron were used, and their concentration levels were 0%, 40%, 70%, and 100%. The germination ratio of the seeds was reduced by the application of simazine, methabenzthiazuron, and alachlor compared with the control (distilled water). The alachlor application severely decreased the sorghum germination ratio. However, seed germination was not greatly influenced by the concentration level of the herbicides. Root and shoot length were increased in the following order: control > simazine > methabenzthiazuron > alachlor. Overall, alachlor significantly reduced root length more than shoot length. The differential tolerance of the $sorghum{\times}sudangrass$ hybrid to pre-emergence herbicides by seeding method was then tested under the field condition. The plants were severely injured by the alachlor application, leading to a great reduction in the number of stems. However, for the simazine and methabenzthiazuron applications the number of stems lost was slightly lower than it was for the alachlor and simazine + alachlor applications. In the seeding method, drilling was more effective in reducing herbicide injury than broadcasting. All of the herbicides effectively controlled weeds. The simazine and methabenzthiazuron applications showed a significantly higher dry matter (DM) yield. However, the alachlor and simazine + alachlor applications severely reduced the DM yield. This result suggests that the alachlor application has a significant effect on plant production. Similarly, the total digestible nutrient (TDN) yield was greatly reduced by the alachlor and simazine + alachlor applications. From the results presented above, we concluded that the yield of DM was the highest for broadcasting with no herbicide. and drilling was the most-effective way to reduce herbicide injury. The simazine application was the most-effective herbicide, showing the highest forage yield and TDN yield.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.2
• /
• pp.71-78
• /
• 1987

This experiment was carried out to examine the effects of sowing method and summer management on the dry matter yield, dead matter, weed development and ground cover of orchardgrass (Dactylis glomerata L.) meadow. The experiment was allocated as a split-split plot design with three replications. The main plots were sowing method of drilling and broadcasting, sub plots were drainage of experimental field, adequate and inadequate, and sub-sub plots were cutting timeof orchardgrass, cutting before rainy season started and cutting after rainy season ended. The experiment was undertaken over a period of 14 months from September, 1983 to October, 1984. The results obtained are summarized as follows: 1. There were no significant differences in dry matter yield among treatments at the first cutting, but cutting before rainy season produced significantly more forage yield ($P{\le}0.01$) than cutting after rainy season at the second and third cuts. At the third cutting, drilled orchardgrass meadow showed a significant dry matter yield ($P{\le}0.05$) than broadcast orchardgrass meadow, 2. The dead matter of orchardgrass was accumulated only at the second cutting when orchardgrass meadow cut after rainy season. Orchardgrass produced in the adequate and inadequate drainage plots consisted 20.4 and 35.9% of dead material, respectively, but no significant difference was found between two drainage treatments. 3. Drilled orchardgrass meadow produced significantly less weeds ($P{\le}0.05$) than broadcast orchardgrass meadow, but the plots cut after rainy season produced significantly more weeds ($P{\le}0.01$) than the plots cut before rainy season. 4. The percent ground cover of orchardgrass in the plots cut before rainy season was significantly higher ($P{\le}0.01$) than that in the plots cut after rainy season at the second cutting. Drilled plots showed a slight increase in the ground cover than the broadcast, but the difference was not significant. The same trend of ground cover of the meadow estimated at the second cutting was sustained after the third cutting. 5. Based on the results of the experiment, it indicates that the second cut of orchardgrass should be made before rainy season related for maintaining high yield of the meadow. Drilling as a sowing method of orchardgrass meadow could be adopted in the view point of reducing weed development.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.286-304
• /
• 2017

In this study, we proposed a new-type of circular perforated caisson breakwater consisting of a bundle of latticed blocks that can be applied to a small port such as a fishing port, and numerically investigated the hydraulic characteristics of the breakwater. The numerical method used in this study is OLAFOAM which newly added wave generation module, porous media analysis module and reflected wave control module based on OpenFOAM that is open source CFD software published under the GPL license. To investigate the applicability of OLAFOAM, the variations of wave pressure acting on the three-dimensional slit caisson were compared to the previous experimental results under the regular wave conditions, and then the performance for irregular waves was examined from the reproducibility of the target irregular waves and frequency spectrum analysis. As a result, a series of numerical simulations for the new-type of circular perforated caisson breakwaters, which is similar to slit caisson breakwater, was carried out under the irregular wave actions. The hydraulic characteristics of the breakwater such as wave overtopping, reflection, and wave pressure distribution were carefully investigated respect to the significant wave height and period, the wave chamber width, and the interconnectivity between them. The numerical results revealed that the wave pressure acting on the new-type of circular perforated caisson breakwaters was considerably smaller than the result of the impermeable vertical wall computed by the Goda equation. Also, the reflection of the new-type caisson breakwater was similar to the variation range of the reflection coefficient of the existing slit caisson breakwater.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.2
• /
• pp.114-120
• /
• 1994

Experiment was conducted to investigate the effects of planting date and planting methods with seedling size on bolting and yield of Ostericum koreanum (MAX.) KITAGAWA Seeding methods were also reviewed to imvestigate their effects on seedling characteristics. This experiment was carried out in Chuncheon during 1988 growing season. The small seeding rate and broadcasting had higher rates of emergence than the others. There was no big difference in seedling size by seedling rate, and more seedling growth was in drilling methods among seed planting methods. The quantity of seedling were produced with the order of medium, small and lastly large seedling. Dense planting $(8l\;/33m^2)$ was advantageous in producing small seedling. Large seedling had earlier flowering than the others and growth was good in planting small seedling with drilling method. The rates of bolting by seedling sizes were 89.6% in large, 64.6% in medium and 36.9% in small seedling. Bolting was influenced the root Quality by producing lignified root which had a least commercial value. More root growth was shown in unbolting plant compared to bolting plant seedling and broadcasting had much more root growth than seedling from drilling. Fresh root yield of unbolting plant was higher than that of bolting plant and highest yield was obtained in the broadcasting plot with small seedling.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.388-397
• /
• 2012

In this study, 3D-NIT(3-Dimensional Numerical Irregular wave Tank) model in which regular wave as well as stable irregular wave can be generated in 3-dimensional numerical irregular wave tank was proposed. To verify validity, the following steps need to be conducted: 1) comparative analysis between calculated waveforms and targeted waveforms at the wave generating point, 2) comparative analysis with the existing experimental values of overtopping volume estimated, targeting shore protection structures installed on a slope bed, 3) comparison with the existing numerical and hydraulic experimental results through application in the analysis on the wave deformation by structures and wave force acting on the vertical cylindrical structures. Based on the results, characteristics of the breaking wave forces according to incident waves and interval distance of structures were identified through application of 3D-NIT model in the analysis on the breaking wave forces acting on the cylindrical structures installed on a slope bed, and reflection and overtopping was reviewed through application in the special breakwaters on the domestic fields. The numerical results obtained the 3D-NIT model are in good agreement with experimental results, and its applicaion to the complex-shpaed coastal structures is verified.