• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.91-105
• /
• 2008

The purpose of this study was to conduct a questionnaire survey for total 503 high school female students in Wonju area, Kangwon province, and thereby determine any potential effectiveness of their trials to reduce weight in their satisfaction with their own figure, daily living practices related to weight control, nutrition knowledge and dietary behaviors. Out of all respondents, it was found that 284 girl students(58.4%) ever tried to reduce weight, and both trial group(trying to reduce weight) and no-trial group were much interested in weight control(94.7% vs. 60.7%). But 85.2% of trial group and 50.3% of no-trial group were dissatisfied at their figure. It was found that the percentage of trial group practicing regular exercise was higher than that of no-trial group doing so(21.8% vs. 5.5%). Subjects scored 14.3 out of 20 on a nutrition knowledge scale, but trial group scored significantly higher points(14.5) than no-trial group(13.9)(p<0.01). In particular, it was notable that trial group showed higher rate of correct answer in certain items such as balanced diet and knowledge about weight control. It was found that our all respondents showed moderate dietary behaviors, which is demonstrated by their mean score of 31.3 in dietary behaviors(possible score: $15{\sim}45$). Notably, it was found that there were problems exposed in their dietary velocity, intake of various diets and intake frequency for each food group(dairy products, marine plants and vegetative oil and fat). And it was found that the percentage of trial group taking diet with vegetative oil was higher than that of no-trial group.

• Radiation Oncology Journal
• /
• v.26 no.1
• /
• pp.35-44
• /
• 2008

Purpose: To evaluate the incidence and prognostic factors of treatment-related pneumonitis in non-small-cell lung cancer(NSCLC) patients treated with intensity modulated radiation therapy(IMRT). Materials and Methods: One-hundred-five patients with NSCLC treated with IMRT between 1 August 2004 and 30 November 2006 were analyzed retrospectively. The mean age of patients was 62.9 years, and squamous carcinomas were confirmed in 81 patients(77%). Sixty-six patients(62.9%) were classified as stage III, and 59 patients had lesions in the right lung. Twenty-seven patients were treated with a dose of 3,060 cGy preoperatively, and 10 patients were given a dose of 5,040 cGy postoperatively. Sixty-eight patients received a dose of 7,020 cGy for curative intent. Sixty-eight patients were treated with the use of the CORVUS planning system and 37 patients were treated with the use of the ECLIPSE planning system. Results: Of 105 patients, 21 patients(20%) had abnormal radiological findings, but only seven patients(6.7%) required treatment for radiation pneumonitis. Six of the seven patients had other serious lesions, including a bronchioesophageal fistula(one patient), recurrence in the treatment field(two patients), brain metastasis(one patient) and lung-to-lung metastasis(two patients); all of these patients died within 19 months after radiation treatment. Sixteen patients(23.5%) that received planning with the CORVUS system had abnormal lung findings. Five patients(13.5%) had abnormal lung findings with the use of the ECLIPSE planning system. Other prognostic factors such as perioperative radiation therapy, a volume over 10% of the V20 volume in the right lung, were also statistically significant. Conclusion: This retrospective analysis suggests that IMRT could be a beneficial treatment modality for the reduction of radiation pneumonitis in NSCLC patients. However, the higher incidence of abnormal radiological findings in perioperative patients treated with relatively lower doses($3,060{\sim}5,040$ cGy) suggest the need for judicious treatment planning in preoperative or postoperative treatment.

• Journal of Bio-Environment Control
• /
• v.23 no.2
• /
• pp.109-115
• /
• 2014

This study examined the uplift bearing capacity of spiral steel pegs according to the degree of soil compaction and embedded depth in a small-scaled lab test. As a result, their uplift bearing capacity increased according to the degree of soil compaction and embedded depth. The uplift bearing capacity under the ground condition of 85% compaction rate especially recorded 48.9 kgf, 57.9 kgf, 86.2 kgf and 116.6 kgf at embedded depth of 25 cm, 30 cm, 35 cm and 40 cm, respectively, being considerably higher than under other ground conditions. There were huge differences in the uplift bearing capacity of spiral steel pegs according to the compaction conditions of ground. Their maximum uplift bearing capacity was 116.6 kgf under the ground condition of 85% compaction rate and at embedded depth of 40 cm, and it is very high considering the data of spiral steel pegs. It is thus estimated that wind damage can be effectively reduced by careful maintenance of ground condition surrounding spiral steel pegs. In addition, spiral steel pegs will be able to make a contribution to greenhouse structural stability if proper installation methods are provided including the number and interval according to the types of greenhouse as well as fixation of plastic film. The findings of the study indicate that the optimal effects of spiral steel pegs for greenhouse can be achieved at embedded depth of more than 35cm and compaction degree of more than 85%. The relative density of the model ground in the test was 67% at compaction rate of 85%.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.166-171
• /
• 2019

This study was conducted to investigate the effect of gaseous chlorine dioxide ($ClO_2$) concentration and treatment method for maintaining marketability in strawberries 'Maehyang' for export. After harvesting strawberry colored with $60{\pm}5%$ of the skin, and the gaseous $ClO_2$ was applied as four treatments in the cold store set with $10^{\circ}C$ which were as follows: i) non-treatment (Control), ii) $0.2mg{\cdot}L^{-1}$ for 30 minutes, iii) $0.4mg{\cdot}L^{-1}$ for 30 minutes, and iv) continuously exposed at $0.4mg{\cdot}L^{-1}$ during the storage period. Weight loss, firmness, soluble solids content, color, incidence of gray mold, and quality grade of strawberries were investigated every 3 days during 16 days storage in cold store. The weight loss was consistently high at $0.2mg{\cdot}L^{-1}\;ClO_2$ treatment, and the weight loss was lower than other treatments when gaseous $ClO_2$ was continuously treated. Firmness was significantly higher at 0.2 and $0.4mg{\cdot}L^{-1}$ $ClO_2$ treatment on the 13th day of storage. Soluble solids content tended to below in continuous gaseous $ClO_2$ treatment. The colors showed no tendency as affected by concentrations and treatment methods of gaseous $ClO_2$. No gray mold was observed in the continuous gaseous $ClO_2$ treatment until the 13th day of storage. The quality grade was lower in gaseous $ClO_2$ treatment group than in the control. As a result, it was possible to decrease the weight loss and the incidence of gray mold by continuously treating the gaseous $ClO_2$ to strawberry 'Maehyang' for export during the storage period after harvest. However, further research is needed on method to maintain quality grades of fruits.

• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.229-236
• /
• 2015

This paper describes the effect of aggregate size on compressive behavior of high-strength steel fiber reinforced concrete. The Specified compression strength is 60 MPa and the range of fiber volume fraction is 0~2%. The main variable is the aggregate size, which was used for the aggregate size of 8 and 20 mm. So, ten concrete mixtures were prepared and tested to evaluate the fresh and hardened properties of SFRC at curing ages (7, 14, 28, 56 and 91 days), respectively. Items estimated in this study are the fresh properties (air contents, slump), hardened properties (compressive strength, modulus of elasticity, post-peak response and compressive toughness). As a result, the aggregate size has little effect on the compressive strength and modulus of elasticity. On the other hand, the ductile behavior was shown after post peak and the compressive toughness was increasing as decreasing the aggregate size. These effects are clearly represented in the fiber volume fraction 2%, which are the point appeared fiber ball. It is considered that the decreasing the aggregate size has effect on the fiber dispersibility.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.295-295
• /
• 2014

일반적으로 박막 태양전지의 효율은 박막 종류에 따른 광 흡수율에 의해 결정되며, 이는 증착한 박막의 두께에 의해 결정된다. 증착한 박막의 두께가 두꺼워질수록 광 흡수율은 증가하지만, 박막 두께가 지나치게 두꺼워지면 열화 현상으로 인한 모듈의 효율 감소가 생기므로 적절한 박막의 두께가 요구된다. 특히 a-Si:H의 경우 가시광 영역에서 높은 흡수계수를 가지고 있어서 얇은 박막 두께로도 태양전지의 제작이 가능하지만, 동일한 박막 두께에서 효율을 더욱 향상시키기 위한 다양한 광 포획 기술에 대한 연구가 많이 진행 되고 있다. 본 연구에서는 자외선을 이용한 nano-imprint lithography 기술을 이용하여 a-Si:H 태양전지의 유리기판 위에 pattern을 삽입하여 광 산란 효과를 향상 시키고자 하였다. 또한 유리기판의 굴절률 (n=1.5)과 투명전극의 굴절률 (n=1.9)의 중간 값을 갖는 ZnO nanoparticles (n=1.7)이 분산 된 imprinting resin을 사용함으로써 점진적으로 굴절률을 변화시켜, 최종적으로 a-Si:H 층까지의 광 투과율을 높이고자 하였다. 제작한 기판의 종류는 다음과 같다. 첫 번째 기판으로는 유리기판 위에 ZnO nanoparticles이 분산 된 imprinting resin을 spin-coating 하여 점진적인 굴절률의 변화에 의한 투과도 향상을 확인하고자 하였다. 두 번째 기판으로는 규칙적인 배열을 갖는 micro 크기의 패턴을 형성하였다. 마지막으로는 불규칙한 배열을 갖는 nano 크기와 micro 크기가 혼재 된 패턴을 형성하여 투과도 향상과 동시에 빛의 산란을 증가시키고자 하였다. 후에 이 세가지 종류를 기판으로 사용하여 a-Si:H 기반의 박막 태양전지를 제작하였다. 먼저 제작한 박막 태양전지용 기판의 광학적 전기적 특성을 분석하였다. 유리 기판 위에 형성한 패턴에 의한 roughness 변화를 확인하기 위해 atomic force microscopy (AFM)를 이용하여 시편의 표면을 측정하였다. 또한 제작한 유리 기판 위에 투명 전극층을 형성 후, 이로 인한 전기적 특성의 변화를 확인하기 위해 hall measurement system을 이용하여 sheet resistance, carrier mobility, carrier concentration 등의 특성을 측정하였다. 또한, UV-visible photospectrometer 장비를 이용하여 각 공정마다 시편의 광학적 특성(투과도, 반사도, 산란도, 흡수도 등)을 측정하였고, 최종적으로 제작한 박막 태양전지의 I-V 특성과 외부양자효율을 측정하여 태양전지의 효율 변화를 확인하였다. 그 결과 일반적인 유리에 기판에 제작된 a-Si:H 기반의 박막 태양전지에 비해, ZnO nanoparticles이 분산 된 imprinting resin을 spin-coating 하여 점진적인 굴절률 변화를 준 것만으로도 약 12%의 태양전지 효율이 증가하였다. 또한, micro 크기의 패턴과 nano-micro 크기가 혼재된 패턴을 형성한 경우 일반적인 유리를 사용한 경우에 비해 각각 27%, 36%까지 효율이 증가함을 확인하였다.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.1
• /
• pp.107-118
• /
• 2006

Load redistribution algorithm is a critical factor in computer system. In a receiver-initiated load redistribution algorithm, receiver(underloaded processor) continues to send unnecessary request messages for load transfer until a sender(overloaded processor) is found while the system load is light. Therefore, it yields many problems such as low cpu utilization and system throughput because of inefficient inter-processor communications until the receiver receives an accept message from the sender in this environment. This paper presents an approach based on genetic algorithm(GA) for dynamic load redistribution including self-adjustable in heterogeneous distributed systems. In this scheme the processors to which the requests are sent off are determined by the proposed GA to decrease unnecessary request messages.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.10
• /
• pp.543-552
• /
• 2004

This paper proposes an energy optimization technique for latency and quality constrained video applications. It consists of two key techniques: frame-skipping technique and buffering technique. While buffering increases the slack time utilization at the OS level. frame skipping Increases the slack time itself at the application level, and both enhance the effectiveness of the dynamic voltage scaling technique. We use an H.263 encoder application as a test vehicle to which the proposed technique is applied. Experiments demonstrate that the proposed technique achieves noticeable energy reduction satisfying the given latency and video quality constraints.

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.641-650
• /
• 2008

As portable devices are used widely, power management algorithm is essential to extend battery use time on small-sized battery power. Although many methods have been proposed, they assumed the voltage transition overhead was negligible or was considered partially. However, the voltage transition overhead might not guarantee to schedule real-time tasks in portable multimedia systems. This paper proposes the adaptive power-aware algorithm to minimize the power consumption by considering the voltage transition overhead. It selects only a few discrete frequencies from the whole frequencies of a system and adjusts the interval between two consecutive frequencies based on the system utilization to reduce the number of frequency change. This algorithm saves the power consumption about 10 to 25 percent compared to a CC RT-DVS method and a frequency-smoothing method.

• 열병합발전
• /
• s.69
• /
• pp.15-20
• /
• 2009

소수력 계획 시 개발지점에 대하여 수많은 자료와 정보 등을 필요로 하게 되는데 특히 해당지역내의 유량분포에 대한 유황자료는 개발의 판단여부를 결정케 하는 중요한 요소이다. 소수력발전소의 설비용량에 직접 관계되는 설계유량의 결정과 재해방지를 위한 유출의 예측을 가능케 하고 발전소운영 시 가동률 및 경제성에도 직접적인 영향을 미치는 중용한 요소이나 여기서 논하는 소수력개발은 하천이나 댐과 같은 유형이 아니라 일정한 유량을 확보하여 배출하기 때문에 문제는 없다. 그러나 계절별 부하에 따른 냉각수량의 변화 및 소수력 발전유량의 변동, 조위(해수면) 변화 등에 따라 달라진다. 그러므로 수위조절을 위한 수문은 이들의 변화에 따라 자동운전이 가능해야 하지만 운전시 발전정격수위를 맞출 수 있도록 수문을 조절한 다음 Turbine Governor에 의해 유량 및 수위를 제어할 수 있도록 설계하여 냉각수 순환수 계통에 영향이 미치지 않게 언제나 적정수위를 유지시킬 수 있는 운전모드로 구축하는 것이 안정이라 볼 수 있다. 소수력발전설비 및 수문의 오작동 및 고장이 발생할 때 수위가 상승하여 냉각계통에 손실수두 증가, 취수펌프의 양정고 증가와 Surge 발생 등으로 발전소의 정상 운전에 미치는 영향이 없어야 하므로 세밀한 검토가 필요하기 때문에 폐쇄시간과 수압상승 값 등 요인 분석후 설계하여야 한다. Figure A와 같이 국내 화력발전단지에서 냉각수로 사용되고 방류되는 해수는 발전소에 따라 ca.70~150 CMS로 ca.2,000~5000 kW 이상의 수력에너지(H=4m 형성 기준)를 보유하고 있으나, 현재 활용되지 못하고 그대로 해양으로 방류되고 있어 이 수력에너지의 개발 방안을 오래전부터 검토하여 왔다. 발전소 온배수의 원활한 배수를 위한 설계 낙차와 함께 남서해안의 조위변화에 따른 낙차를 이용하는 것으로 소수력 발전 방식과 조력발전 방식의 특징을 동시에 활용할 수 있다.