• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.704-708
• /
• 1994

This study was performed to compare quality of citron juice as affected by the extraction method. The yield of citron juice was 24.49% by method I (rotary-crushing and screening), 18.09% by method II (pressing) and 12.60% by method III (belt-pressing), respectively. Juices by methods I and II had more soluble solid contents and essential oil and pulp volume than that by method III. Method III was higher in titratable acidity than methods I and II. The contents of fructose, glucose and sucrose in method III were 0.54%, 0.37% and 1.11%, respectively, which were lower values than those in other methods. But there was no siginificant difference in the contents of total sugar by the extraction method. For fatty acids composition, the contents of oleic acid in method I, palmitic acid, linoleic acid and linolenic acid in method II, and stearic acid in method III, respectively, were highest when compared with other methods. The contents of free amino acids detected in method III were smaller than those in methods I and II. Threonin was detected only in method I, methionine and cystine were not detected in methods I. II and III. But the contents of the total amino acids in method III were $1.3{\sim}1.6$ times as large as those in methods I and II.

• Journal of Plant Biotechnology
• /
• v.45 no.1
• /
• pp.63-70
• /
• 2018

Brazzein is the smallest sweet protein and was isolated from the fruit pulp of Pentadiplandra brazzeana Baillon, native to tropical Africa. From ancient times, the indigenous people used this fruit in their diet to add sweetness to their daily food. Brazzein is 500 to 2000 times sweeter than sucrose on a weight basis and 9500 times sweeter on a molar basis. This unique property has led to increasing interest in this protein. However, it is expensive and difficult to produce brazzein other than in its native growing conditions which limits its availability for use as a food additive. In this study, we report high production yields of, brazzein protein in transgenic rice plants. An ORF region encoding brazzein and driven by the $2{\times}CaMV\;35S$ promoter was introduced into rice genome (Oryza sativa Japonica) via Agrobacterium-mediated transformation. After transformation, 17 regenerated plant lines were obtained and these transgene-containing plants were confirmed by PCR analysis. In addition, the selected plant lines were analyzed by Taqman PCR and results showed that 9 T0 lines were found to have a single copy out of 17 transgenic plants. Moreover, high and genetically stable expression of brazzein was confirmed by western blot analysis. These results demonstrate that recombinant brazzein was efficiently expressed in transgenic rice plants, and that we have developed a new rice variety with a natural sweetener.

• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1401-1407
• /
• 2019

To elucidate whether or not solvent-tolerant bacteria use anti-oxidative defense systems to defend themselves against toxic solvents, oxidative enzyme activity and total anti-oxidative capacity (T-AOC) were investigated in two tolerant strains of Pseudomonas sp. under toluene stress. The superoxide dismutase (SOD) activities of solvent tolerant BCNU 106 exhibited relatively increased levels at a toluene concentration of 100 mg/l, where those of solvent tolerant BCNU 171 increased at 200 mg/l. A greater than three-fold increase in catalase (CAT) levels was observed at concentrations of 200 and 300 mg/l in BCNU 106, and a two-fold increase was monitored at the same concentrations in BCNU 171. High glutathione S-transferase (GST) levels were also observed in the solvent tolerant bacteria. Higher levels of T-AOC was expressed in the solvent tolerant strains than in the ordinary non-tolerant KACC 10266. The highest plateau of SOD in BCNU 171 was observed at 1 hr of toluene exposure. CAT levels plateaued at 1 hr and 14 hr in BCNU 106 and reached the highest plateau at 3 hr in BCNU 171. The highest peak of T-AOC occurred at 9 hr in BCNU 106, and two high peaks occurred in BCNU 171, at 1 hr and at 9 hr of toluene exposure. The solvent-tolerant bacteria showed active antioxidant responses and could survive under harsh environments, including the presence of solvents, through means of antioxidant defense systems.

• Korean journal of applied entomology
• /
• v.9 no.1
• /
• pp.7-13
• /
• 1970

1. Kum Nam Poong which is highly susceptible to bacterial leaf blight was used as the host plant throughout this experiment. Xanthomonas oryzae 6526 was inoculated on the top of upper leaves by single needle inoculation method. After 14 days, the enlarged spots were examined in the experimental pots. Each of 3 levels of nitrogen, phosphate and potassium pots were arranged at random with three replications. 2. The amounts of nitrogen fertilizer applied and the lesion development of bacterial leaf blight were positively correlated regardless of application of phosphate and potassium fertilizers. 3. The effect of phosphate fertilizer on the lesion development was not significantly different from standard level. The lesion development was stimulated when the amount of phosphate fertilizer was increased as twice as standard level. 4. The inhibitory effect of potassium fertilizer on leaf blight was maximum by applying standard level. The stimulative effect of potassium fertilizer on the lesion development, however, was noticed. when potassium fertilizer applied was increased as twice as the standard level. 5. The heading date and spike number of rice plant were significantly correlated with the lesion development, and such phenomena were depended on the amount of nitrogen fertilizer applied regardless of the other fertilizers applied in this experiment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1516-1521
• /
• 2010

This study was conducted to investigate the physicochemical and quality characteristics of alcohol fermentation of tomato. For yeast, Saccharomyces bayanus Lalvin EC-1118 displayed the highest alcohol content (11.8%), whereas titratable acidity and pH did not differ significantly between different yeasts. Alcohol fermentation conducted at higher temperature ($25^{\circ}C$) resulted in higher alcohol content and lower sugar level. The highest alcohol content was produced using 11.4% sucrose and 11.1% fructo-oligosaccharide. These two saccharides were suitable for tomato alcohol fermentation. Lycopene levels were similar regardless of sugar type, and were approximately 4.2 mg%. To improve lycopene content, three types of fruit wine with low-dose lycopene (LDL), medium-dose lycopene (MDL), and high-dose lycopene (HDL) were made. Their alcohol contents were not significantly different (10.0~10.8%). Lycopene contents of LDL, MDL, and HDL wine were 4.25 mg%, 11.40 mg%, and 20.45 mg%, respectively. Therefore, HDL tomato wine should be manufactured.

• Korean Security Journal
• /
• no.61
• /
• pp.333-352
• /
• 2019

In January and August 2019, there were amendments to the Unfair Competition and Trade Secrets Protection Act (UCPA) and the Industrial Technology Protection Act(ITPA). These amendments will contribute to technology protection. But these amendments need to be supplemented further. In the area of civil remedies, despite the introduction of treble damages in the case of the UCPA and ITPA, the provisions related to the submission of supporting data have not been maintained. Therefore, it is necessary to recognize the claim of the other party as true if it is maintained at the level of the revised Patent Act and the scope of submission of supporting data. And the enforcement of the case of compulsory submission for the calculation of damages, and the order of filing documents are not followed. ITPA, on the other hand, has introduced the compensation for damages, but there is no provision for estimating the amount of damages. Therefore, it is necessary to estimate the amount of lost profits, profits, and royalties. In the area of criminal remedies, both the UCPA and ITPA have raised the penalty, but the sentencing regulations are not maintained. In addition, although the recent outflow of technology has expanded beyond organizational deviations to organizational outflows, amendments need to be made in relation to the serious consequence for the punishment of related juristic persons, such as companies involved in it. It should be noted that Japan and the United States have corporate regulations and regulations. In addition, in relation to the confiscation system, Act on Regulation and Punishment of criminal proceeds concealment require that domestic defenses be confiscated by defense industry technology, while trade secrets and industrial technologies are confiscated only by "foreign" outflows, and an amendment is necessary.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.8
• /
• pp.353-358
• /
• 2017

An electrical power utility, like an electrical power pole, includes various kinds of sensors for smart services. Temperature data is considered one of the important factors that can influence the smart operations of this utility. This study suggests a method for temperature data analysis for deciding the status of the smart electrical power utilities by using Kalman Filter and Ensemble Model. The suggested approach separates the temperature data according to the different positions of the temperature sensors of a utility, then uses Kalman Filter and Ensemble Model to analyse the characteristics of the temperature variation. With detailed processes, method explains the variation between an external temperature factor like weather temperature data and the sensed temperature data, and then, analysis the temperature data from each position of electrical power utilities. In this process, the suggested method uses Kalman Filter to remove error data and the ensemble model to find out mean value of every hour of electrical data. The result and discussion of temperature analysis were described clearly with the analysed results of electrical data. Finally, we were able to check the working condition of the power devices and the range of the temperature data foe each devices, which may help to indicate any causalities with respect to the devices in the utility pole.

• Food Engineering Progress
• /
• v.13 no.3
• /
• pp.169-175
• /
• 2009

Water soluble polysaccharides (WSP) and arabinogalactan of Portulaca oleracea L. (POL) were increased after extrusion and commercial cellulase treatment. Arabinose and galactose content increased more about 1.5 times than those of raw POL, and rhamnose also increased about 2.6 times in WSP. High molecular weight fraction (I) of POL depending on extrusion condition including Ext I, Ext II and Ext III degraded into low molecular weight fraction (II) about 37, 29, and 26%, respectively, ranged from 67,000-69,000 Da of molecular weight. Especially, the molecular weight and composition of WSP with extruded, were increased from 9 to 13% in low molecular weight fraction, compared to those of raw POL. Solubilization and degradation of polysaccharides were a directly propotional to specific mechanical energy in POL extrusion. WSP obtained by extrusion at Ext I and Ext II were found to be effective antioxidants in different in vitro assays with regards to 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and Trolox equivalent antioxidant capacity (TEAC). However, these results suggest that WSP obtained using extrusion and subsequent enzymatic treatment may be an effective method to produce arabinogalactan from POL and be used as a functional food ingredients.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.4
• /
• pp.168-178
• /
• 2021

Numerical simulations were implemented to look into the modified seabed topography due to the presence of breakwaters of varying reflection characteristics. The numerical model was composed of OlaFlow, an OpenFoam-based tool box, and a physics-based morphology model [Seoul Foam]. In doing so, the interaction between the seabed, which undergoes deformation due to siltation and scouring, and the incoming waves was described using Dynamic Mesh. The rubble-mound, vertical, and curved slit caisson breakwaters with varying reflection characteristics resulted in standing waves that differ from each other, shown to have a significant influence on the seabed topography. These results are in line with Nielsen's study (1993) that sands saltated under the surface nodes of standing waves, where the near-bed velocities are most substantial, convected toward the surface antinodes by boundary-layer drift. Moreover, the crest of sand waves was formed under the surface antinodes of standing waves, and the trough of sand waves was formed under the surface antinodes. In addition, sand wave amplitude reaches its peak in the curved slit caisson with a significant reflection coefficient, and the saltation of many grains of sand would cause this phenomenon due to the increased near-bed velocity under the nodes when the reflection coefficient is getting large.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.15-23
• /
• 2022

3D printing technology is being used in various fields such as medicine and biotechnology, and materials containing metal powder are being commercialized through recent material development. Therefore, this study intends to analyze the photon spectrum during added filtration using 3D printing material during diagnostic X-ray examination through simulation. Among the Monte Carlo techniques, MCNPX (ver. 2.5.0) was used. First, the appropriateness of the photon spectrum generated in the simulation was evaluated through SRS-78 and SpekCalc, which are X-ray spectrum generation programs in the diagnostic field. Second, photon spectrum the same thickness of Al and Cu filters were obtained for characterization of 3D printing materials containing metal powder. In addition, the total photon fluence and average energy according to changes in tube voltage were compared and analyzed. As a result, it was analyzed that PLA-Al required about 1.2 ~ 1.4 times the thickness of the existing Al filter, and PLA-Cu required about 1.4 ~ 1.7 times the thickness of the Cu filter to show the same degree of filtration. Based on this study in the future, it is judged that it can be utilized as basic data for manufacturing 3D printing additional filters in medical fields.