• Membrane Journal
• /
• v.5 no.1
• /
• pp.1-15
• /
• 1995

대기오염 문제가 국가적인 사회문제로 대두되면서 대기오염 방지장치의 수요가 급증하고, 점차 강화되는 환경오염 규제로 인하여 고효율의 오염방지장치에서 대표적인 집진장치 기술은 대기 및 실내오염 제어뿐만 아니라, 정확성이 높은 첨단 클리룸 수요의 증가 등으로 인하여 산업체의 각 분야에서 필수적이면서도 기본적인 기술이다. 대기중의 분진은 분자의 응축 및 핵생성 등에 의하여 발생되는 매우 미소한 입자($0.05{mu}{ extrm{m}}$단위)와 일반공장 및 작업장 등에서 발생되는 분진(0.1~$10{mu}{ extrm{m}}$) 그리고 바람에 의한 지표면의 흙, 모래 등에 의한 비교적 큰 분진 등의 광범위한 조성과 입경분포를 가진다. 이 가운데, 특히 산업발달에 따라 불가피하게 생성되며, 대기오염의 주종을 이루면서 인체에 가장 유해한 분진입자는 산업체의 오일 및 석탄연소 보일러, 자동차, 제철/제강 및 시멘트 플랜트 등으로 배출되는 미세입자들이며, 앞으로 이들의 제어에 관한 연구가 지속적인 관심의 대상이 될 것이다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.03a
• /
• pp.1-45
• /
• 1995

대기오염 문제가 국가적인 사회문제로 대두되면서 대기오염 방지장치의 수요가 급증하고, 점차 강화되는 환경오염 규제로 인하여 고효율의 오염방지 장치의 설치가 요구된다. 대기오염방지장치에서 대표적인 집진장치 기술은 대기 및 실내오염제어 뿐만아니라, 정확성이 높은 첨단 클린룸 수요의 증가 등으로 인하여 산업체의 각 분야에서 필수적이면서도 기본적인 기술이다. 대기중의 분진은 분자의 응축 및 핵생성등에 의하여 발생되는 매우 미소한 입자(0.05 $\mu$m)와 일반공장 및 작업장등에서 발생되는 분진 (0.1 - 10 $\mu$m) 그리고 바람에 의한 지표면의 흙, 모래등에 의한 비교적 큰 분진등의 광범위한 조성과 입경분포를 가진다. 이 가운데, 특히 산업발달에 따라 불가피하게 생성되며, 대기오\ulcorner의 주종을 이루면서 인체에 가장 유해한 분진입자는 산업체의 오일 및 석탄연소 보일러, 자동차, 제철/제강 및 시멘트 플랜트등으로 배출되는 미세입자들이며, 앞으로 이들의 제어에 과한 연구가 지속적인 관심의 대상이 될 것이다.

• Resources Recycling
• /
• v.4 no.4
• /
• pp.59-69
• /
• 1995

Distillation oI the dust generated during waste tue pyrolysis was perIomerl to rccover valuable metal sucll as zlnc. lead and iron. Pemcahilily and carnprcssivc tests were pursucd to ahlain the basic dala for cslraclian of zinc from the slntering propcrtp ol stccl making dusts and distilled carhon of waste tires as wcll as wastc pulp sludge mixlure hr~quet were investigated at various sinlcring lempcraturcs. Permeablllly rncieased with increastng amount of waste pulp in specil~cd istilled carhon due tn the fnrmat~ono f porusily in lhe sample TIE co~npress~vsctr ength showed the vanous values wlth different amDunl of dislilled-carhon adrlit~nilsa nd at diIIerenl sinlering tcmpcralures. X-ray diffifraction anvlyscs oI a hnquet rn~rhtre of steelmaking dusts(20Q didilled carhon and 10% waste pulp sblered ;>I SOOT) showcd thal the briquet consisted ot ZnO and Fc,O.,, hut was not found at the hriguet rintered at over 10OO'C. Crude zinc oxide sintered a1 IOOOC contained OZA Zn.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.206.1-206
• /
• 2003

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.114-121
• /
• 2001

Effect of sintering temperature and dusts content on sintered density ($\rho$) and magnetic properties were evaluated. Cores sintered at 1350 $^{\circ}C$ for 1 hour with the Fe powders containing up to 10 wt.% dusts showed a good AC/DC properties. For example, the DC magnetic properties of magnetic induction (B$_{15}$), coercive force (H$_{c}$) and permeability ($\mu$$_{max}$) of cores containing 10 wt.% dusts were ranging over 9.8~ 10.9 kG, 2.2-2.3 Oe and 1950~2050, respectively. These magnetic properties are equivalent to those of competitor's (i.e, Ancorsteel produced by Hoganas). The cores obtained from the present work are expected to apply for high-performance soft magnetic components such as automotive and DC motor.

• Korean Journal of Materials Research
• /
• v.15 no.2
• /
• pp.106-111
• /
• 2005

Effects of stainless steel-making dusts and binder content on compacting $density(\rho)$ and magnetic properties were evaluated. Cores compacted with the mixture of pure Fe powders, $5wt.\%$ dusts and $0.25wt.\%$ binder showed good AC magnetic properties. For example, permeability$({\mu}a)$ and core loss(P) of the cores containing $5wt.\%$ dusts at 500 kHz were 62 and $4008\;{\mu}W/cm^3$, respectively. These properties are almost equivalent to those of competitor's products (i.e, Ancorsteel TC 80 produced by $H\ddot{o}gan\ddot{a}s$ Corp.). The powdered cores obtained from the present work are expected to apply for high-performance soft magnetic components such as normal mode choke filter and pulse transformer.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.136-139
• /
• 2000

Fenton-like oxidation of para-nitrophenol(PNP) was studied using hydrogen peroxide iii combination with steeler's dust substituted for ferrous iron in Fenton's reaction. Various factors critical in the degradation of PNP were studied, including hydrogen peroxide dosage, concentration of steeler's dust. and initial pH. Experimental results showed that 1,000mg/L PNP and its oxidation intermediate could be mostly decomposed within 30m1n by 10g/L steeler's dust, 0.25% hydrogen peroxide, and initila pH of 3.0. The reaction rate constant (k) of CODcr concentration were calculated with the addition of steeler's dust(0.0059 min$^{-1}$ (g/L)$^{-1}$ ) and hydrogen peroxide(0.2965 min$^{-1}$ (%)$^{-1}$ ), respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.227-234
• /
• 2006

Microstructures of free surface and interior of glass-ceramics obtained by heat treating silicate glass specimen containing electric arc furnace dust(EAF dust) were observed. The crystallization temperature, $T_c$ of glassy specimen was measured around $850^{\circ}C$ from the result of different thermal analysis so heat treatment temperature to obtain glass-ceramic specimen was selected as $950^{\circ}C$ for 1 hr. Glass specimens containing 50 wt% dust were amorphous, while glass specimens containing 70 wt% dust showed spinel crystal peaks in XRD results. In case of glass-ceramic specimens, spinel crystalline phase was appeared with willemite, and willemite crystal peak intensity increased with increasing dust contents. The fractured surface of glass specimens containing 50 wt% dust was smooth like mirror surface, but that containing 70 wt% dust showed spinel crystals of 10 ${\mu}m$ size in glass matrix. In case of glass-ceramic specimens, ZnO crystal particles of $2{\sim}5{\mu}m$ size were produced in free surface and glassy phase, spinel and willemite crystal phases existed in interior. There were no crystals in glasses containing 50 wt% dust, while glass containing 70 wt% dust had 14 vol% crystals. Crystallinity of glass-ceramic specimens containing 50 and 70 wt% dust were 19 and 43%, respectively. When microstructures of glass and glass-ceramic specimens were observed through SEM after TCLP experiment, glass specimens showed flaking phenomenon while glass-ceramic specimens showed a slight corrosion evidence without any cracks.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.45-52
• /
• 2000

Generally, the residues of EAF's dusts treated by reduction process at high temperature are disposed. If the residues can be recycled as iron sources of EAF by upgrading their iron contents, it can be expected to reduce the amounts of disposed wastes and the environmental impacts. Reduction of EAF's dusts mixed with millscale was carried out in rotary hearth furnace to upgrade iron contents of reduction residues. Dusts should be reduced rapidly to protect from reoxidation of reduced iron residue which can be reoxidized at high temperature. In our experimental conditions, optimum reduction time was about 40min. and iron contents of the residues were increased with increasing mixing ratio of millscale and upgrade to 85% at 50%wt mixing ratio. Zinc and lead contents in residues were about 3% and 0.5% respectively. The residues reduced rapidly must be recycled in EAF because heavy metal elements in the residues can be extracted easily and contaminate air and water.

• Journal of Environmental Science International
• /
• v.25 no.2
• /
• pp.331-336
• /
• 2016

In this study the optimum conditions for recovery of valuable metal in Electric Arc Furnace Dusts were investigated. 2M of $H_2SO_4$, 1~5 of solid/liquid ratio, 0~180 min of leaching time has been established for leaching condition, and for electrowinning, each of Pt, C, Zn, Pb anode and Zn, Cu cathode was compared respectively at pH 2, 4 and 6. The result of elemental analysis of Zn crystal, a lagre quantity of Fe and H has been observed with Zn and other heavy metal, therefore, impurities removing process would be requir for enhancing purity of Zn. As the result, about 60% of Zn has been recovered under condition of 2 M of $H_2SO_4$, 1:2 of S/L ratio at 120 min, and Pt or Pb for anode, Zn for cathode has been shown the highest efficiency of electrowinning at pH 6.