• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.37-45
• /
• 1997

대규모의 쉘 구조물 설계에서는 고정하중이 지배적이므로 구조물을 구성하는 부재단면은 거의 고정하중에 의해 결정되는 경우가 많다. 이미 보고된 정적하중에 대한 쉘의 좌굴에 관한 연구결과들이 말해주고 있듯이 구조물의 안전율이 어느정도 확보되어 있는가를 평가하는 일이 우선적으로 중요하다. 그러나 고정하중에 대한 안전율을 확보하여 설계된 쉘이 지진동을 받았을 경우 어떻게 거동할까, 어느정도의 지진동에 견딜 수 있는지를 조사하여 그 구조물의 내진성능을 파악하는 일은 설계상 반드시 필요한 일이라 생각된다. 지진응답에 관한 많은 연구들이 주로 수평지진동을 받는 구조물을 대상으로 하고 있다. 그러나 지진동은 원래가 3차원적인 것이고 따라서 직하형의 지진동을 받을 가능성도 있다. 특히 장span구조물은 상하지진동의 영향이 클 것으로 생각된다. 본 고에서는 상하지진동을 받는 단순지지된 편평쉘의 응답해석례를 소개하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.408-409
• /
• 2019

PMSM(Permanent Magnet Synchronous Motor)의 약자속 제어 시 인버터를 6-스텝 모드까지 운전함으로써 전동기의 출력 토크 능력을 최대로 활용할 수 있다. 그러나 6-스텝 동작을 위해 일반적으로 사용되는 정적 과변조 기법의 경우 구현이 복잡하며, 과도 상태에서의 동작이 고려되지 않기 때문에 토크 응답 특성이 저하된다. 이에 비해 구현이 간단한 동적 과변조 기법을 사용하는 경우 전압변조지수 증가에 따라 인버터의 전압 이득이 1보다 비선형적으로 크게 작아지기 때문에 6-스텝 모드에서의 운전이 힘들다. 이에 본 논문에서는 구현이 용이한 동적 과변조 기법에 대해 과변조 성능이 향상되도록 하는 방법을 제안하며, 제안된 방법에 의해 인버터가 6-스텝 모드까지 운전될 수 있으므로 구동 전동기의 출력 토크 능력을 최대한으로 활용할 수 있으며, 향상된 토크 응답 특성을 얻을 수 있다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.5 s.45
• /
• pp.75-86
• /
• 2005

In performance-based design methods, it is clear that the evaluation of the nonlinear response is required. Analysis methods available to the design engineer today are nonlinear time history analyses, or monotonic static nonlinear analyses, or equivalent static analyses with simulated inelastic influences. The nonlinear time analysis is the most accurate method in computing the nonlinear response of structures, but it is time-consuming and necessitate more efforts. Some codes proposed the capacity spectrum method based on the nonlinear static analysis to determine earthquake-induced demand. The nonlinear direct spectrum method is proposed and studied to evaluate nonlinear response of structures, without iterative computations, given by the structural linear vibration period and yield strength from pushover analysis. The purpose of this paper is to compare the accuracy and the reliability of approximate nonlinear methods with respect to shear buildings and various earthquakes. The conclusions of this study are summarized as follows: 1) Linear capacity spectrum method may fail to find a convergent answer or make a divergence. Even if a convergent answer is found, it has a large error in some cases and the error varies greatly depending on earthquakes. 2) Although nonlinear capacity spectrum method need much less calculation than capacity spectrum method and find an answer in any case, it may be difficult to obtain an accurate answer and generally large error occurs. 3) The nonlinear direct spectrum method is thought to have good applicability because it produce relatively correct answer than other methods directly from pushover curves and nonlinear response spectrums without additional and iterative calculations.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.1
• /
• pp.9-16
• /
• 2003

To evaluate the seismic performance of multistory building structures use an equivalent SDOF model to represent the resistance of the structure to deformation as it respond in its predominant mode. This paper presents a method of converting a MDOF system into an equivalent SDOF model. The principal objective of this investigation is to evaluate appropriateness of converting method through perform nonlinear time history analysis of a multistory building structures and an equivalent SDOF model. The hysteresis rules to be used an equivalent SDOF model is obtained from the pushover analysis. Comparing the peak inelastic response of a moment resisting reinforced concrete frames and an equivalent SDOF model, the adequacy and the validity of the converting method is verified. The conclusion of this study is following; A method of converting a MDOF system into an equivalent SDOF model through the nonlinear time history response analysis is valid. The representative lateral displacement of a moment resisting reinforced concrete frames is close to the height of the first modal participation vector \ulcorner$_1{\beta}$${_1{\mu}}=1$. It can be found that the hysteresis rule of an equivalent SDOF model have influence on the time history response. Therefore, it necessary for selecting hysteresis rules to consider hysteresis characteristics of a moment resisting reinforced concrete frames.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.31-42
• /
• 2016

Usually the seismic stability analysis of slope uses the pseudostatic analysis considering the inertial force by the earthquake as a static load. Geostructures such as slope include the uncertainty of soil properties. Therefore, it is necessary to consider probabilistic method for stability analysis. In this study, the probabilistic stability analysis of slope considering the uncertainty of soil properties has been performed. The fragility curve that represents the probability of exceeding limit state of slope as a function of the ground motion has been established. The Monte Carlo Simulation (MCS) has been implemented to perform the probabilistic stability analysis of slope with pseudostatic analysis. A procedure to develop the fragility curve by the pseudostatic horizontal acceleration has been presented by calculating the probability of failure based on the Artificial Neural Network (ANN) based response surface technique that reduces the required time of MCS. The results showed that the proposed method can get the fragility curve that is similar to the direct MCS-based fragility curve, and can be efficiently used to reduce the analysis time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.445-453
• /
• 2013

This paper was calculated the earthquake load using ELFP(Equivalent Lateral Force Procedure) and RSA(Response Spectrum Analysis) for PSC Box Girder representative bridges by the Phase of KTX designed by ELFP and verified the difference of these analyses. It have been modeled 3 dimensional FE model of 5 bridges using a commercial FEM program for the comparison of these analyses using a commercial FEM program and were compared the earthquake load. It has been to confirm the increase of the difference ELFP of RSA calculated to seismic ground acceleration according to the ground condition and natural period. It is mean that the necessity of seismic reinforcement due to the application of a larger of earthquake load than designed earthquake load form the seismic performance evaluation result according to the difference of calculated earthquake loads.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.155-166
• /
• 2008

Research dam is consisted of concrete gravity dam that right bank department is built to concrete material, left bank department is composition dam that is consisted of rockfill dam that consist of rockfill material In domestic case, composition dam form of storage of water facilities of about 17,000 does not exist hardly in dam of irrigation water industry drinking water purpose that manage local government or other institution, Even if exist, is real condition that there is total nonexistence administrator fare of facilities, Choose unique dam of domestic multipurpose dam and analyzed conduct special quality of con'c gravity dam and rockfill dam joint part To analyze dynamic conduct special quality of composition dam by analytic method in this research, Do modelling via axis of dam and achieved static(Psuedo-static, modify Psuedo-static) and dynamic analysis, When achieving earthquake response analysis, analyzed seismic response analysis between concrete part and rockfill's part.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.87-94
• /
• 2009

This paper presents dynamic behavior of double-layer barrelvault systems subjected to earthquake loadings. In order to investigate different seismic behaviors according to Time History Analysis (THA), six open angles were employed and different fundamental frequencies corresponding to each open angle were considered. A total of 24 double-layer structures were developed by using Midas Gen., which is a computer analysis program and then THA with three different earthquakes with 5% damping ratio was performed. This study investigated the characteristics of the dynamic response for X-, Y- and Z- directions, both subjected to the horizontal earthquake (H) and applied to the vertical earthquake (V) with respect to the each variable, which assumed to be important aspects for spatial structure. In order to examine the dynamic characteristics, the ratio of acceleration in specific nodes of barrelvaults was evaluated at the time with maximum response. The main purpose of this study is to obtain equations of the equivalent earthquake loading with respect to the barrelvault systems.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.1
• /
• pp.72-79
• /
• 1998

Static deformation theory of elastoplastic structures can be applied only if the magnitude of loading is less than the plastic collapse force $F_c$. However, with impact or explosive blast loading, the structure can be subjected to an intense but short-duration force pulse that exceeds the plastic collapse force and initiates structural collapse. In this paper, the dynamic response of a rigid-perfectly plastic cantilever subject to intense impact loading is examined in terms of the plastic collapse force. When a step loading is applied, the motion of the beam is calculated and analyzed through the non-dimensionalization of variables. It is concluded that the motion of a beam can be characterized as a function of the nondimensionalized force parameter, $f{\equiv}F/F_c$, where $F_c$ represents the critical force for plastic collapse. This result is used to the analysis of the beam motion subject to rectangular force pulse.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.76-82
• /
• 2018

In this present study, in order to update the finite element model considering the boundary conditions, a method has been proposed. The conventional finite element model updating method, updates the finite element model by using the dynamic characteristics (natural frequency, mode shape) which can be estimated from the ambient vibration test. Therefore, prediction of the static response of an actual structure is difficult. Furthermore, accurate estimation of the physical properties is relatively hard. A novel method has been proposed to overcome the limitations of conventional method. Initially, the proposed method estimates the rotational spring constant of a finite element model using the deflection of structure and the rotational displacement of support measurements. The final updated finite element model is constructed by estimating the material properties of the structure using the finite element model with updated rotational spring constant and the dynamic characteristics of the structure. The proposed finite element model updating method is validated through numerical simulation and compared with the conventional finite element model updating method.