• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.557-564
• /
• 2004

The WAM wave model has been widely used for wave hindcasting in the ocean by many domestic and foreign researchers due to its relative simplicity and high accuracy. As this model was originally developed for the condition of deepwater and comparatively coarse grid size covering wide area, it might produce in a fault result caused by the improper distribution of directional spreading. We extensively investigated involved problems based on WAM Cycle 4 model and suggested the improved WAM model so that it is applicable to both shallow water sea and fine mesh wave simulation The modified W AM model is verified here by comparing the computed result with and the observed data at Ieodo Ocean Research Station for September of 2003.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.205-214
• /
• 2011

Finite element grid refinements with different intensities having 14 K, 52 K and 211 K on the Yellow Sea (YS) have been constructed to make precise tidal simulations. In the meanwhile 57 K grid was made to the extended North Western Pacific (NWP) sea. Numerical simulation were done based on 32 parallel processors by using pADCIRC v 49.21 model. In the YS tidal simulation on YS-G52K and YS-G211K grid structure, KorBathy30s and ETOPO1 bathymetry data are used and 4 major tidal constituents are prescribed from FES2004. Computed results are in good agreement within 0.138 meter in RMS error for amplification and 14.80 degree of phase compared to observed tidal records. Similar error bounds are acquired in the extended NWP tidal simulation on NWP-G57K grid with 8 tidal constituent prescription on the open boundary.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1205-1208
• /
• 2007

본 연구에서는 3차원 CFD 모형인 FLOW-3D 모형을 이용하여, 군남 홍수조절지 접근수로의 안정성과 웨어의 월류능력을 검토하였다. 이를 위해서 현지측량자료와 1:5,000도의 수치지도를 이용하여 지형과 기본계획 설계(안)의 여수로를 구성하였다. 지형은 모델링 범위를 충분히 포함하도록 홍수조절지의 상 하류에 걸쳐 작성하였으며, 연직범위는 가능 최대 홍수량(PMF)시 저수지의 최고수위를 초과하는 범위까지 재현하였다. 모델링 범위는 웨어와 같은 구조물 주변에서는 조밀한 격자를 사용하여 정밀한 흐름현상을 재현토록 하였으며, 저수지 부분과 하류하천 부분에 대하여는 느슨한 격자망을 적용하여 최종적으로 2가지 격자망으로 모델링 전체범위에 대하여 격자를 구성하였다. 상류 경계조건으로는 저수지 수위를 경계조건으로 설정하였고, 하류 경계조건으로는 군남 홍수조절지가 일반댐과 달리 상 하류의 표고차가 크지 않아 방류시 하류하천 수위 상승으로 인하여 통수능에 영향을 줄 것으로 판단되므로, 방류량 대 하류하천 형성수위 관계식을 산정하여 방류량에 따른 하류하천의 수위를 하류경계조건으로 설정하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.48-56
• /
• 2002

A fabrication method of long--period fiber gratings (LPFGs) that can be easily controlled resonance wavelength and losses is introduced. We used the superposition method that core and cladding diameter are modulated by applying a number of small electric-arc to the normal fiber. We derived an equation of resonance wavelength change according to core diameter variation using the phase matching condition and showed the results are well matched with experiments. The measured resonant wavelengths of arc-induced superposition LPFGs according to grating period are well coincident with that of phase matching condition. The resonance wavelength is measured for the temperature changes and a slight mechanical strength degradation of arc-induced LPFGs is observed by increasing arc times.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.6
• /
• pp.95-100
• /
• 2008

The object of this paper is to verify possible to monitor the deformation of cable in the tensegrity structure. Also, always monitoring system of tensegrity structure using Fiber Bragg Grating Sensor is described. We carry out experiments with measuring deformation of cable in the tensegrity structure based on loading conditions. In the result of experiment, the Fiber Bragg Grating Sensors shows accurate response to the loading conditions. Therefore, we can make sure the possibility of Fiber Bragg Grating Sensor in health monitoring of the cable structure like tensegrity structure.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2001

The Talbot effect of an elongated circular (EC) grating composed of a line grating and two semicircular gratings with well matched pitches is experimentally presented. As the relative positions between the fixed EC grating and the moving Talbot image of another EC grating or a self Talbot image are one-dimensionally deformed, we can visually observe moire fringes generated by their superposition. Two examples of their applications, that is, the measurement of the wedged angle of a wedged prism and of the fine rotational angle of a mirror are described.cribed.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.3
• /
• pp.308-316
• /
• 2013

This paper proposes an observation model for a particle filter-based localization using a sonar grid map. The proposed model estimates a predicted observation by considering the properties of a sonar sensor which has a large angular uncertainty. The proposed model searches a grid which has the highest probability to reflect a sonar beam using the following procedures; (1) the reliable area of a single sonar data is determined using the footprint association model; (2) the detection probability of each grid cell in a sonar beam coverage in estimated. The proposed model was applied to the particle filter based localization, and was verified by experiments in indoor environments.

• The Korean Journal of Rheology
• /
• v.1 no.1
• /
• pp.36-45
• /
• 1989

아이어닝 공정은 제품의 치수정밀도가 정확하게 조절괴는 정밀 금속 성형공정이다. 아이어닝 공정은 대개 냉간상태에서 행하여지며 그리고 때로는 단공정 대신에 다단식이 적 용된다. 본연구의 목적은 강소성 유한 요소법으로 단공정과 다단식 아이어닝 공정을 해석하 여 아이어닝 공정에 대한 적절한 설계변수와 최적 설계조건을 찾는데 있다. 본 연구에서는 공정설계게 있어서 공정변수를 다이의 원추각과 단의 개수로 주었다. 본 해석에서는 단공정 아이어닝과 다단식 아이어닝 공정의 성형하중, 응력과 변형도 분포 그리고 격자 변형을 계 산하였다 그리고 이 값들에 대한 공정 변수의 영향을 검토한 결과 성형하중과 격자 변형에 있어서 계산 결과와 잘 일치하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.147-154
• /
• 2000

A new hardware compensation method reducing displacement measurement errors, caused by tilt of index scale in moire linear encoders, has been developed. In conventional moire linear encoders, the detectors are aligned perpendicular to the line of moire fringes this structure is very sensitive to an unwanted tilt of the gratings. In this paper, a newly designed grating, called a phase-modulated grating, is developed to compensate for non-orthogonal errors. By using the phase-modulated grating instead of a conventional index, it is possible to reduce non-orthogonal errors of moire linear encoders.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.120-127
• /
• 2003

A novel three degrees of freedom sensing method utilizing binary grid pattern image and vision camera is presented. The binary grid pattern image is designed by Pseudo-Random Binary Arrays and referenced to encode in-plane position of a moving stage of the contact-free planar actuator. First, the yaw motion of the stage is detected using fast image processing and then the other planar positions, x and y, are decoded with a sequence of images. This method can be applied to the system that needs feedback of in-plane position, with advantages of a good accuracy and high resolution comparable with the encoder, a relatively compact structure, no friction, and a low cost. In this paper, all the procedures of the above sensing mechanism are described in detail, including simulation and experiment results.