• Korean Journal of Optics and Photonics
• /
• v.22 no.6
• /
• pp.283-290
• /
• 2011

A Raman LIDAR system has been designed and constructed for quantitative measurement of water vapor mixing ratio. The comparison with commercial microwave radiometer and global navigation satellite system(GNSS) was performed for the precipitable water vapor(PWV) profile and total PWV. The result shows that the total GNSS-PWV and LIDAR-PWV have good correlation with each other. But, there is small difference between the two methods because of maximum measurement height in LIDAR and the GNSS method. There are some significant differences between Raman and MWR when the water vapor concentration changes quickly near the boundary layer or at the edge of a cloud. Finally we have decided that MWR cannot detect spatial changes but LIDAR can measure spatial changes.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.28-33
• /
• 2007

We measured cloud points of Poly(methylmethacrylate) (PMMA) in various solvents using the high-pressure variable volume view cell apparatus. The solvents used for dissolving PMMA were chlorodifluoromethane (HCFC-22), dimethylether (DME), 1,1,1-trifluoroethane (HFC-143a), 1,1-difluoroethane (HFC-152a) and 1,1,1,2-tetrafluoroethane (HFC-134a), and the effect of $CO_2$ concentration on the phase behavior of $PMMA+HCFC-22+CO_2$ system and $PMMA+DME+CO_2$ system was observed. PMMA was dissolved well in HCFC-22 from about 340 K, 5MPa and in DME from about 300 K, 28MPa. However, PMMA was not dissolved at all up to 423.15 K, 160MPa in the other fluorine compound such as HFC-l43a, HFC-152a and HFC-134a. PMMA+HCFC-22, $PMMA+HCFC-22+CO_2$ and PMMA+DME systems exhibit the lower critical solution temperature (LCST) behavior, however, $PMMA+DME+CO_2$ system exhibits the upper critical solution temperature (UCST) behavior. In the $CO_2$ mixture, the cloud point pressure of PMMA was increased dramatically proportional to the amount of $CO_2$ added, and from this result, it was known that $CO_2$ could be used as an antisolvent for fabricating PMMA nano-particles. And the cloud point of PMMA could be controlled by changing the concentration of $CO_2$.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.79-91
• /
• 2014

Solubility data of carbon dioxide ($CO_2$) in 1-butyl-3-methylpiperidinium bis(trifluoromethylsulfonyl)imide ($[bmpip][Tf_2N]$) ionic liquid are presented at pressures up to about 30 MPa and at temperatures between 303 K and 343 K. As far as we know, the data on the $CO_2$ solubility in the $[bmpip][Tf_2N]$ ionic liquid have never been reported in the literature by other investigators. The solubilities of $CO_2$ were determined by measuring the bubble point or cloud point pressures of the $CO_2+[bmpip][Tf_2N]$ mixtures with various compositions using a high-pressure equilibrium apparatus equipped with a variable-volume view cell. To observe the effect of the cation composing the ionic liquid on the $CO_2$ solubility, the $CO_2$ solubilities in $[bmpip][Tf_2N]$ used in this study were compared with those in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)-imide ($[bmim]Tf_2N]$). As the equilibrium pressure increased, the $CO_2$ solubility in $[bmpip][Tf_2N]$ increased sharply. On the other hand, the $CO_2$ solubility decreased with increasing temperature. The mole fraction-based $CO_2$ solubilities were almost the same for both $[bmpip][Tf_2N]$ and $[bmim][Tf_2N]$, regardless of temperature and pressure. The phase equilibrium data for the $CO_2+[bmpip][Tf_2N]$ systems have been correlated using the Peng-Robinson equation of state.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.171-179
• /
• 2002

It is well known that the geometry of the articular surface plays a major role in the kinematic and kinetic analysis to understand human knee joint function during motion. The functionality of the knee joint cannot be accurately modeled without considering the effects of sliding and lolling motions. We Present a 3-D human knee joint model considering sliding and rotting motion and major ligaments. We employ more realistic articular geometry using two cam profiles obtained from the extrusion of the sagittal Plain view of the representative Computerized Tomography image of the knee joint compared to the previously reported model. Our model shows good agreement with the already reported experimental results on Prediction of the lines of force through the human joint during gait. The contact point between femur and tibia moves toward the Posterior direction as the knee undergoes flexion, reflecting the coupling of anterior and Posterior motion with flexion/extension. The anterior/posterior displacement of the contact Point on the tibia plateau during one gait cycle is about 16 mm. for the lateral condyle and 25 mm. for the medial condyle using the employed model Also. the femur motion on the tibia undergoes lateral/medial movement about 7 mm. and 10 mm. during one gait cycle for the lateral condyle and medial condyle. respectively. The developed computational model maybe Potentially employed to identify the joint degeneration.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1415-1425
• /
• 2018

Kompsat-5 is the first Earth Observation Satellite which is equipped with an SAR in Korea. SAR images are generated by receiving signals reflected from an object by microwaves emitted from a SAR antenna. Because the wavelengths of microwaves are longer than the size of particles in the atmosphere, it can penetrate clouds and fog, and high-resolution images can be obtained without distinction between day and night. However, there is no color information in SAR images. To overcome these limitations of SAR images, colorization of SAR images using Cycle GAN, a deep learning model developed for domain translation, was conducted. Training of Cycle GAN is unstable due to the unsupervised learning based on unpaired dataset. Therefore, we proposed MS Cycle GAN applying multi-scale discriminator to solve the training instability of Cycle GAN and to improve the performance of colorization in this paper. To compare colorization performance of MS Cycle GAN and Cycle GAN, generated images by both models were compared qualitatively and quantitatively. Training Cycle GAN with multi-scale discriminator shows the losses of generators and discriminators are significantly reduced compared to the conventional Cycle GAN, and we identified that generated images by MS Cycle GAN are well-matched with the characteristics of regions such as leaves, rivers, and land.

• Archives of design research
• /
• v.17 no.2
• /
• pp.311-322
• /
• 2004

The purpose of this study is to ascertain pattern design element in traditional palaces among those in the neighboring three nations of East Asia, notably Korea, China and Japan. The basic assumption underlying this study is that these northeastern Asian states have been developed a unique inter-cultural ties over long periods of time in history, culminating in their respective design cultures. Undoubtly the ultimate goal to be pursued, by so doing, has to be inquiry into the identical prototype of Korean pattern design element. In the West, the pattern is appreciated by an aesthetic level, but the East Asian pattern is a symbolic alphabet deeply rooted in religious and folk beliefs. The difference of the respective country comes from the expression style of the pattern the Chinese express the magnificent pattern with various color, the Korean do the moderate pattern with harmonious color with the nature and the Japanese do the stylized pattern with the material color. To sum up similarities and dissimilarities among the design element in traditional palaces of Korea, China, and Japan is as the following : It is to be noticed that the mainly common characteristics of the artistic design are 'naturalism', 'harmonious ideas 'and 'confucianism'. But the representation style of the design element is differed from the country.

• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.445-456
• /
• 2005

The land surface parameters should be determined with sufficient accuracy, because these play an important role in climate change near the ground. As the surface reflectance presents strong anisotropy, off-nadir viewing results a strong dependency of observations on the Sun - target - sensor geometry. They contribute to the random noise which is produced by surface angular effects. The principal objective of the study is to provide a database of accurate surface reflectance eliminated the angular effects from MODIS 250m reflective channel data over Korea. The MODIS (Moderate Resolution Imaging Spectroradiometer) sensor has provided visible and near infrared channel reflectance at 250m resolution on a daily basis. The successive analytic processing steps were firstly performed on a per-pixel basis to remove cloudy pixels. And for the geometric distortion, the correction process were performed by the nearest neighbor resampling using 2nd-order polynomial obtained from the geolocation information of MODIS Data set. In order to correct the surface anisotropy effects, this paper attempted the semiempirical kernel-driven Bi- directional Reflectance Distribution Function(BRDF) model. The algorithm yields an inversion of the kernel-driven model to the angular components, such as viewing zenith angle, solar zenith angle, viewing azimuth angle, solar azimuth angle from reflectance observed by satellite. First we consider sets of the model observations comprised with a 31-day period to perform the BRDF model. In the next step, Nadir view reflectance normalization is carried out through the modification of the angular components, separated by BRDF model for each spectral band and each pixel. Modeled reflectance values show a good agreement with measured reflectance values and their RMSE(Root Mean Square Error) was totally about 0.01(maximum=0.03). Finally, we provide a normalized surface reflectance database consisted of 36 images for 2001 over Korea.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.555-568
• /
• 2013

Atmospheric optical thickness during nighttime was estimated in this study using analysis on the images of the moon taken from commercial digital camera. Basically the Langely Regression method was applied to the observations of the moon for the cloudless and optically stable sky conditions. The spectral response functions for the red(R), green(G), and blue(B) channels were employed to derive effective wavelength centers of each channel for the observations of the moon, and the correspondent Rayleigh optical thickness were also calculated. Aerosol optical thickness (AOT) was calculated by subtracting Rayleigh optical thickness from the atmospheric optical thickness derived from the Langley regression method. As there are only handful of nighttime AOT observations, the AOT from the moon observations was compared with the AOT from sun-photometers and the MODIS satellite sensor, which was taken several hours before the moon observations of this study. As a result, the values of AOT from moon observations agree with those from sun-photometers and MODIS within 0.1 for the R, G, B channels of the digital camera. On the other hand, ${\AA}$ngstr$\ddot{o}$m Exponent seems to be subject to larger errors due to its sensitiveness to the spectral errors of AOT. Nevertheless, the results of this study indicate that the method reported in this study is promising as it can provide nighttime AOT relatively easily with a low cost instrument like digital camera. More observations and analyses are warranted to attain improved nighttime AOT observations in the future.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.151-160
• /
• 2013

Recently, although many efforts have been made to estimate insolation over Korean Peninsula based on satellite imagery, most of them have utilized overseas satellite imagery. This paper aims to estimate insolation over the Korean Peninsula based on the Korean stationary orbit satellite imagery. It utilizes level 1 data and level 2 cloud image of COMS MI, the first meteorological satellite of Korea, and OMI image of NASA as input data. And Kawamura physical model which has been known to be suitable for East Asian area is applied. Daily global horizontal insolation was estimated by using satellite images of every fifteen minutes for the period from May 2011 to April 2012, and the estimates were compared to the ground based measurements. The estimated and observed daily insolations are highly correlated as the $R^2$ value is 0.86. The error rates of monthly average insolation was under ${\pm}15%$ in most stations, and the annual average error rate of horizontal global insolation ranged from -5% to 5% except for Seoul. The experimental results show that the COMS MI based approach has good potential for estimating insolation over the Korean Peninsula.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.397-405
• /
• 2015

Currently, Korea's digital maps are being produced through traditional aerial photogrammetry methods. Aerial photogrammetry is the most economical way to produce a map of a wide area. However, timely survey is not allowed depends on weather condition and it is inefficient for small area surveying in economic point of view. Therefore, it costs too much and needs long time to produce a map for various small areas where are terrestrial changes for updating the map. In contrast, UAV photogrammetry is possible to work even in cloudy weather because of shooting at low altitude below the clouds. It also has excellent mobility and shoot quickly and well suited for small-scale mapping in several places by low cost. In this study, we produced an ortho-photo and digital map with the UAV photogrammetry method using SIFT and SfM algorithm and verified its accuracy to evaluate the applicability for future digital map updates. The accuracy was verified by comparing the results of the ground survey for check points selected on the digital map. Test results show small errors at ±2.6cm in X coordinates, ±2.8cm in Y coordinates and ±5.8cm in height and we could find a possibility that UAV photogrammetry would be fully applicable for digital map updating.