• Land and Housing Review
• /
• v.12 no.1
• /
• pp.129-137
• /
• 2021

External shading devices are well known solar control devices that can help reduce the cooling load of commercial buildings. For this study, experiments were conducted to examine the feasibility of shading devices in reducing both the cooling and heating loads. The influence of sky radiant cooling during winter was verified for the external shading device, internal roller blind, and window. Results can be summarized as follows. The temperature difference between the inner and outer surfaces of the window with the external shading device was 11.8℃ compared to 14.6℃ for one without the external shading device. This 2.8℃ difference was due to heat exchange by sky radiation when the surface temperature of the shading device was lower than the ambient outdoor air temperature. The roller blind resulted in a lower temperature of 0.8℃ compared to the average temperature of the window's air cavity. This was due to heat exchange by sky radiation of the roller blind surfaces. Without shading devices, the outside surface temperature of the window is about 3℃ higher. The study also found that when external shading devices were installed on both the southwest and southeast sides, the outside surface temperature of the windows were lower on the southwest side than the southeast side.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.373-383
• /
• 2021

Our society is aging rapidly. In this super-aged society, the increase in healthcare costs are considered a national problem that undermines the sustainability of social security. Various services for healthcare for the elderly have been promoted to address this. However, most of them have focused on healthcare after the outbreak of chronic diseases and lack preventive healthcare. Most of the preventive healthcare projects are only pilots. In this paper, the current status of health care services for senior citizens at home and abroad was analyzed and based on this, the limitations and improvements were analyzed to propose the establishment of IoT-based Total Silver Care Center. IoT-based Total Silver Care Center may be conveniently monitored the health status of the elderly through various sensors, medical devices, and smart bands. And based on this, it can improve the quality of nursing services through time-saving and work efficiency of nursing providers. In addition, health care interventions may be provided in a timely manner if there is a change in the health status of users. And real-time imaging systems can help overcome mental difficulties.

• International Area Studies Review
• /
• v.13 no.3
• /
• pp.385-412
• /
• 2009

This study first analyzes economical environment change (factor) of investment nation Japan and Japanese enterprise at the analysis of Japanese enterprise's over-seas expansion factor and influence. As a result of an analysis of the factor about Japanese enterprise's overseas expansion from 1990 to 1996 and from 1998 to 2006, commonly applied factors were Yen exchange rate, interest rates, wage, enterprise profit, facility investment, and consumption expenditure. Especially, as a result of regression analysis, a sudden change of "low interest rate" was main factor at Japanese enterprise's overseas expansion from 1990 to 1996, and Japan's "Yen ex-change rate" was drawn as an important factor from 1998 to 2006. That is, from 1990 to 1996, a shock by a sudden rise in Yen value could be viewed gradually accumulated and absorbed inside Japanese economy from 1998 to 2006. Whereas it could be said that Japanese enterprise's overseas expansion was accelerated under Japanese government's overseas supporting policy and "low interest rate" together with the factor in the rise of Yen value from 1998 to 2006.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.707-710
• /
• 2010

A new perilla cultivar, 'Bomnaeyeop 1 ho' was developed by, Kangwon National University in 2008. Its characteristics were investigated three times from 2006 to 2008 under optimal condition of cultivation. 'Bomnaeyeop 1 ho' can be characterized by dark green leaf color and tall plant height. This cultivar has more number of flower cluster and ear per cluster compare to 'Saeyeupsil' control. From result of GC/MS analysis, main compounds consist of perilla ketone, beta-caryophyllene and myristicin in 'Bomnaeyeop 1 ho' cultivar.

• Clean Technology
• /
• v.25 no.1
• /
• pp.74-80
• /
• 2019

Thermochemical treatment of sewage sludge is an energy-intensive process due to its high moisture content. To save the energy consumed during the process, the hydrothermal carbonization process for sewage sludge can be used to convert sewage sludge into clean solid fuel without pre-drying. This study is aimed to investigate co-firing characteristics of the hydrothermally carbonated sewage sludge (HCS) to a pulverized coal combustion system. The purpose of the measurement is to measure the pollutants produced during co-firing and combustion efficiency. The combustion system used in this study is a furnace with a down-firing swirl burner of a $80kW_{th}$ thermal input. Two sub-bituminous coals were used as a main fuel, and co-firing ratio of the sewage sludge was varied from 0% to 10% in a thermal basis. Experimental results show that $NO_x$ is 400 ~ 600 ppm, $SO_x$ is 600 ~ 700 ppm, and CO is less than 100 ppm. Experimental results show that stable combustion was achieved for high co-firing ratio of the HCS. Emission of $NO_x$ and $SO_x$ was decreased for higher co-firing ratio in spite of the higher nitrogen contents in the HCS. In addition, it was found that the pollutant emission is affected significantly by composition of the main fuel, regardless of the co-firing ratios.

• Journal of Wetlands Research
• /
• v.21 no.1
• /
• pp.43-56
• /
• 2019

Irrigated and flooded rice paddy contributes to the greenhouse gas emissions (GHG) that affect climate. This in turn affects the supply and reliability of the water needed for rice production. This dynamic makes current rice production methods foreseeably less sustainable over time while having other undesirable effects. Intermittent irrigation by a means of the system of rice intensification (SRI) and alternate wetting and drying (AWD) methods was reviewed to reduce global warming potential (GWP) from 29% to 90% depending on site-specific characteristics from flooded rice paddy and analyzed to be a promising option for enhancing the productivity of water as well, an increasingly constraining resource. Additional benefits associated with the SRI/AWD can be less arsenic in the grain and less degradation of water quality in the run-off from rice paddies. Adoption and expansion of intermittent irrigation of SRI/AWD may require costly public and private investments in irrigation infrastructure that can precisely make irrigation control, and the involvement and upgrading of water management agencies and farmer organizations to enhance management capabilities. Private and public collaboration as a means of earning carbon credit under the clean-development mechanism (CDM) with SRI/AWD for industries to meet as a part of their GHG emission quota as well as a social contribution and publicity program could contribute to adopt intermittent irrigation and rural investment and development. Also, inclusion of SRI and AWD in programs designed under CDM and/or in official development assistance (ODA) projects could contribute to climate-change mitigation and help to achieve UN sustainable development goals (SDGs).

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.304-313
• /
• 2018

Agricultural land reclamation in Saemangeum tidal land project is mostly planned to be completed by 2020. Irrigation water for the land is required to be prepared by that time. However, water quality for the irrigation sources is barely meet the target concentration. This paper described the reduction effect of and policy consideration for best management practices (BMPs) which were fertilizer prescription by soil test (SO#1), mixed application of SO#1 and 3 (SO#2), drainage gate control (SO#3), time-release fertilizer application (SO#4), and control (CT). Reduction of paddy runoff was relatively higher in SO#3 (25%) and SO#1 (27%) while lower in SO#4 (9%) and SO#2 (7%) than that in CT. In addition, farmers promised to follow the BMP guidelines but they didn't because of the several problems caused for the BMPs implementation. Thus, it recommended developing an automated control of irrigation gate and paddy water depth and supporing farmers for NPS pollution control and irrigation water reduction.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.171-183
• /
• 2018

Despite the rapid expansion of satellite images supply, the application of imagery is often restricted due to unautomated image processing. This paper presents the automated process for the selection of training areas which are essential to conducting supervised image classification. The training areas were selected based on the prior and cover information. After the selection, the training data were used to classify land cover in an urban area with the latest image and the classification accuracy was valuated. The automatic selection of training area was processed with following steps, 1) to redraw inner areas of prior land cover polygon with negative buffer (-15m) 2) to select the polygons with proper size of area ($2,000{\sim}200,000m^2$) 3) to calculate the mean and standard deviation of reflectance and NDVI of the polygons 4) to select the polygons having characteristic mean value of each land cover type with minimum standard deviation. The supervised image classification was conducted using the automatically selected training data with Sentinel-2 images in 2017. The accuracy of land cover classification was 86.9% ($\hat{K}=0.81$). The result shows that the process of automatic selection is effective in image processing and able to contribute to solving the bottleneck in the application of imagery.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.59-59
• /
• 2019

벼룩이울타리(Arenaria juncea M.Bieb.)는 7~8월에 백색의 꽃이 취산화서로 아름답게 피며, 산지, 산비탈 또는 메마른 초지에 자생한다. 청열 및 양혈의 효능이 있고, 은시호의 대용으로 쓰이며, 뿌리에는 triterpenoid saponins과 sapogenin이 함유되어 있다. 본 연구는 분화용 식물로 벼룩이울타리를 활용하기 위한 효율적인 포트 정식방법을 개발하기 위하여 수행되었다. 실험은 2018년 선행연구에서 생산된 유묘를 7월 2일에 정식하여 10월 15일까지 약 15주 동안 재배하였다. 대조구는 플라스틱 화분 10호($9{\times}9cm$)에 원예상토를 충진하고 200구 트레이에 셀 당 4립씩 파종하여 생산된 1셀을 정식하였다. 재배 실험은 용기종류[비닐포트(3, 4치), 플라스틱 포트(8, 10, 12호)], 토양 종류[원예상토, 중화 피트모스:펄라이트(3:1, 4:1), 마사토:중화 피트모스(2:1, 3:1)], 묘의 소질[파종 립수(1, 2, 4, 6립), 파종 용기(162, 200, 288구 트레이)] 등을 달리하여 진행하였다. 연구의 결과, 벼룩이울타리는 토양의 양이 많을수록 생육이 양호한 결과를 보여, 플라스틱 12호에 재배하는 것이 분화용으로 가장 효과적이었다. 한편, 비닐 4치와 플라스틱 10호의 경우, 플라스틱 12호와 생육에 큰 차이가 없어 경제적인 것으로 판단된다. 벼룩이울타리는 원예상토에서 재배하는 것이 전반적으로 생육이 우수하였으며, 다음으로 마사토와 피트모스 혼용토 순이었다. 그러나 피트모스와 펄라이트 혼용토는 비율과 관계없이 생육이 감소하며, 잎에 황백화 현상이 나타났다. 셀당 파종량을 달리하여 육묘한 후 정식한 결과, 전반적인 생육은 1립 파종묘에서 양호하였으나, 2, 4, 6립 파종묘가 1립 처리구에 비해 포트당 엽수가 약 1.35, 1.44, 2.01배 증가하는 경향을 보였다. 그러므로 유묘 생산시 셀당 파종량을 늘려 재배하는 것이 분화용으로 효과적일 것으로 판단된다. 파종용기별 유묘의 생육은 162, 200, 288구 트레이 순이었으나, 정식 후 약 15주 동안 재배한 결과, 162, 200구에서 생산된 유묘를 정식하는 것이 288구보다 양호하였다. 따라서, 육묘 단계에서 토양 및 공간을 절약할 수 있는 200구에 파종하여 재배하는 것이 효율적인 방법으로 생각된다. 결론적으로, 벼룩이울타리의 분화용 재배는 플라스틱포트 12호에 원예상토를 충진하고 200구 트레이에 4립 또는 6립을 파종하여 육묘한 묘를 정식하는 것이 가장 효과적이다. 한편, 경제적인 측면을 고려할 때, 재배면적을 적게 차지하는 비닐포트 4치 또는 플라스틱 포트 10호에 마사토와 중화 피트모스를 혼용하여 충진한 다음 유묘를 이식하는 것도 하나의 방법으로 판단된다.