• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.83-88
• /
• 2017

In this paper, we propose a three-element CRPA array with improved low-elevation gain. The proposed antenna consists of a feed patch and a radiating patch, and the feed patch is connected by a coaxial cable. The radiating patch is electromagnetically coupled to the feed patch, which allows to improve the low-elevation gain of the antenna. To demonstrate the suitability of the proposed antenna, the antenna characteristics are measured in a full anechoic chamber. The resulting bore-sight gain is 2.8 dBic with an axial ratio of 2.7 dB, and the average gain at the low-elevation direction of $75^{\circ}$ is -1.4 dBic. The results verify that the proposed antenna is suitable for CRPA arrays with anti-jamming capability.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.589-600
• /
• 1999

Audible noise of UPS(uninterruptible power supply) with small rated [Xlwer is usually generattxl by the c cooling fan‘ For active noise control for radiated noise of UPS, it is adequate to apply multiple-channel F FXLMS algorithm based on Filten어 x LM~longrightarrow algorithm. In this paper, to reduce the audible noise of UPS‘ Its m noise characteristics of UPS are an띠yzed and active noise control by using 이ffiMOClVlultiple- Reference/ M Multiple-Output) FXLMS algorithm is perf‘onned. Also, noise reduction characteristics are shown by computer S simulation and experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.732-739
• /
• 2005

The determination of sound pressure radiated from periodic plate structures is fundamental in the estimation of noise level in aircraft fuselages or ship hull structures. As a robust approach to this problem, here a very general and comprehensive analytical model is developed for predicting the sound radiated by a vibrating plate stiffened by periodically spaced orthogonal symmetrical beams subjected to a sinusoidally time varying point load. In this these, we experiment with the numerical analysis using the space harmonic series and the SYSNOISE for measuring the vibration mode and character of response caused by sound radiation with adding the harmonic point force in the thin isotropic plate supported by the rectangular lattice reinforcement. We used the reinforcements, beams of open type section like the style of 'ㄷ' letter; the space of the beams were chosen to be 0.2m, 0.3m, 0.4m. We studied the behavior of sound pressure levels, analysis of vibration mode between support points, connection between frequency function and sound pressure levels, and connection between position function and sound pressure levels.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.97-102
• /
• 2019

The GNSS(Global Navigation Satellite System) provides important information such as Position and Navigation, Timing(PNT) to various weapon systems in the military. as a result, applications that employ satellite navigation systems are increasing. therefore, a number of studies have been conducted to deceive the weapon systems that employ GNSS. GNSS spoofing denotes the transmission of counterfeit GNSS-like signals with the intention to produce a false position and time within the victim receiver. In order to deceive the victim receiver, spoofing signal should be synchronized with GNSS signal in doppler frequency and code phase, etc. In this paper, Civilian GPS L1 C/A spoofing signals have been evaluated and analyzed by SDR receiver.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.211-217
• /
• 2021

The purpose of this study is based on the convergence establishment of a coronavirus infection management system that can occur during clinical trials by grasping the knowledge of corona, infection possibility, infection prevention possibility, and implementation level of infection prevention behavior of radiologists working at K University Hospital. It is in providing data. This study was a descriptive research study, and data were collected from 50 radiologists working at K University Hospital from March 25 to June 30, 2020. The characteristics of the subjects and their knowledge of the COVID-19, the possibility of infection, the possibility of infection prevention, and the level of implementation of infection prevention actions were surveyed, and the collected data were analyzed with SPSS 25.0. The frequency and percentage were calculated for the general characteristics and infection-related characteristics of the subjects. The correlation between variables was analyzed by Pearson's correlation coefficient, and the factors influencing the progression of infection prevention behavior were analyzed by multiple regression analysis. Factors influencing COVID-19 infection prevention behavior shown in this study were 1.7 points for infection prevention behavior when corona knowledge increased by 1 point, and infection prevention activity increased by 11.3 points when the level of transmission pathway recognition rose 1 point. When the figure rose by 1 point, the infection prevention behavior increased by 4.2 points. When looking at the standard regression coefficient, preventive behavior is performed. Among knowledge, transmission path perception, and anxiety, the factor that has the greatest influence was the perception of the transmission path of COVID-19. As factors influencing the implementation of infection prevention actions, knowledge of COVID-19, awareness of transmission paths, and anxiety appear to be the potential of infection prevention, so in the event of a corona outbreak, information on infectious diseases and education on the possibility of infection prevention should be provided to promote the implementation of preventive action.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.417-422
• /
• 2013

In this paper, the implementation of a null-steering antenna array using GPS patch antennas is suggested. The antenna array consists of five patch antenna elements fabricated on the ceramic substrate. The antenna element proposed here is a typical circular polarization patch and a prototype patch array antenna is manufactured on the PCB. The antenna has one reference element located at the center and other four elements are placed at the corners. A null in the direction of the jamming signal can be produced by changing the phases of 4-elements. Simulation results of the array antenna by CST MWS are presented and discussed. The basic performances are measured and the results are shown. The results show that the antenna presented here can be used to remove the signals from the directions of any jammers.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.5
• /
• pp.402-407
• /
• 2013

In this paper, an analysis of sound propagation between two rooms with different mediums is discussed. Statistical energy analysis (SEA) is used to consider energy equilibrium among subsystems associated with the sound pressure levels in two rooms and the vibration level of the wall between rooms. Effect of the sound radiation from the structure-borne noise of the wall on sound pressure level of the receiving room is investigated. For a numerical example, sound propagation between engine room and water tank joined by a steel plate whose size is $8.4{\times}4$ m, is considered. It is found that when the critical frequency of the plate is above the frequency range of interest, the sound pressure level in the water tank is dominated by sound transmission through the plate, while sound radiation from the structure-borne noise of the plate is negligible except low frequency range below 63 Hz.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.10-14
• /
• 2017

A reverberation chamber is widely used in mobile handset measurements due to its faster and simpler measurement process compared to traditional anechoic chambers. We propose an ultra-wideband inverse conical antenna design suitable as a reference antenna in a reverberation chamber. Traditionally, multiple discone antennas are needed to cover more than 10:1 operation bandwidth of a reverberation chamber. The proposed inverse conical antenna offers wideband impedance matching bandwidth by virtue of the linear impedance transition along its oblique side. The antenna is feasible to mount on the conductive walls which can be utilized as a ground to improve the matching bandwidth, antenna gain and radiation patterns. The antenna geometry is optimized using a 3D electromagnetic simulation tool and fabricated using a 3D printer. The measured results show that the antenna reflection coefficient lower than -10dB and radiation efficiency more than 70% at the frequency range of 0.65~7 GHz.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.43-49
• /
• 2020

An engineered barrier system (EBS) for the geological disposal of high-level radioactive waste (HLW) consists of a disposal canister packed with spent fuel, buffer material, backfill material, and gap-filling material. The buffer material fills the space between the canister and the near-field rock, thus serving to restrain the release of radionuclides and protect the canister from groundwater penetration. Furthermore, as significant amounts of heat energy are released from the canister to the surrounding rock, the thermal conductivity of the buffer plays an important role in maintaining the safety of the entire disposal system. Therefore, given the high levels of heat released from disposal canisters, this study measured the thermal conductivities of compacted bentonite buffers from Gyeongju under temperature variations ranging 25 to 80~90℃. There was a 5~20% increase in thermal conductivity as the temperature increased, and the temperature effect increased as the degree of saturation increased.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.515-523
• /
• 2012

In this paper, the resonance characteristics and radiation characteristics of a spherical patch on a dielectric sphere are analyzed. Resonance characteristics can be obtained from the resonant frequency and the quality factor. Radiation characteristics can be also analyzed from the E-field in the far region. In order to calculate these parameters, spectral domain analysis method is applied. Algebraic equation can be obtained in spectral domain through Vector Legendre transform pair and Galerkin's method. So, efficient calculation is possible numerically. It is investigated that radius, curvature of a spherical patch, and dielectric constant of a dielectric sphere have an effect on characteristics of a spherical patch.