• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.116-127
• /
• 2021

In this paper, we propose simultaneous control which improve in transient state performance of mechanical parking facilities through simultaneous control of PLC and inverter. In conventional mechanical parking facilities, it is controlled only by PLC, and it is more likely to generate over-currents in induction motors, and the ride comfort is reduced due to wear and damage caused by friction on the brake pads, and the life is shortened. To improve this problems the application of control techniques through simultaneous control of PLC and inverter prevents over-currents in induction motors, protects brake pads, improves ride comfort, increases control and ensures safety. We verify its validity by applying the proposed control method via simultaneous control of PLC and inverter to a mechanical parking facility.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.519-528
• /
• 2019

Current brake system changes the kinetic energy into heat energy by friction-type of brake that the braking action is diverging into the air. The system has a device called a retarder that generates braking force. High-tech research on the high-speed response characteristics of retarders utilizing part of the braking energy of the retarder to save electrical energy consumption is already underway in advanced countries. In this paper, we propose DC-DC converter which converts 3-phase voltage generated from retarder to 24V DC voltage for battery charging and verify its validity through experiments.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.751-755
• /
• 2011

Electric Parking Brake(EPB) is the system operated by electric control actuator. It differs from the mechanical parking brake system which is operated by lever and pedal in need of human power. The EPB system is composed of DC motor, helical and differential epicyclic gear, screw, cables, and sensor. This paper describes about the EPB system mathematically and constructs a modeling of the EPB system using MATLAB/SIMULINK. Especially, SimMechanics library in SIMULINK is used to make each parts of system a module. By made modeling of the friction torque between bolt and nut. Cable tension can be maintained after the motor operating stops.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.599-606
• /
• 2017

In this paper, the automatic control system of the stroller brake was designed and manufactured to reduce the safety accident of the stroller. The ultrasonic sensors are used to determine whether the handle of the driver's hand is touching or not, and the gyro sensor is designed to detect the current tilt of the baby carriage. If the next driver's hand is not recognized and the tilt exceeds a certain angle, the servo motor is activated and the hydraulic brake is operated to prevent the accident on the downhill road. Finally, in this paper, a smart phone-based application was developed to make the remote control of the brake possible.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.112-118
• /
• 2012

The electronic wedge brake is one of the brake-by-wire systems with a self-energizing effect. The electronic wedge brake has faster response than the conventional hydraulic brake and requires only about one-tenth the power to operate. However, the electronic wedge brake cannot be implemented unless the self-energizing effect is reliably controlled. The self-energizing mechanisms may result in unintentional lock up and are very sensitive to environment and parametric variations of the friction coefficient. In this study, the electronic wedge brake is modeled into dynamic equations, and a sliding mode controller is designed based on the model. The performance of the proposed controller is verified in simulations.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.245-246
• /
• 2014

본 논문에서는 외전형 영구자석 동기 전동기의 전기적 브레이크 동작 시에 발생하는 회생 에너지를 분석한다. 그리고 전류 정보 없이 전동기 속도 및 배터리의 전압만으로 회생 전력을 제어하는 방법을 제안한다. 후륜 허브 전동기를 가지는 자전거 프로토 타입을 제작하고, 제안하는 회생 제동 제어 기법을 적용한 실험을 통해 제안 기법을 검증한다.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.223-226
• /
• 2018

Recently, various safety technologies have been extensively developed to protect occupants from accidents. This paper surveys various automotive occupant protection technologies such as antilock braking system, traction control system, electronic brake distribution, electronic stability control, autonomous emergency braking, airbag, seatbelt pretensioner, and active headrest. Their operation principles and implementations are also explained.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1836-1837
• /
• 2006

본 논문에서는 차량용 전자제어식 주차 브레이크(Electric Parking Brake, EPB) 시스템의 고장 허용 제어(fault tolerant control)를 위한 고장 안전 기법(fail-safe logic)을 제안한다. 고장 안전 기법의 구현을 위하여 EPB 구동 모터에 흐르는 전류 리플을 측정하여 센서리스 위치 추정을 한다. 추정값과 홀 센서의 출력을 비교하여 잔차(residual)를 발생하고, 이를 이용하여 시스템 내부의 고장을 진단하고 고장 안전 기법을 통하여 전체 시스템의 오작동을 방지한다. 시스템 오작동을 방지하기 위한 고장 안전 기법에 대하여 정의하고 모의실험을 통하여 내부 시스템의 고장이 발생 시 이 기법이 고장을 진단하고 시스템을 안전하게 운영할 수 있음을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.105-106
• /
• 2011

본 논문에서는 퍼지제어기를 이용한 전기자동차용 영구자석 동기전동기의 영속도 제어 기법에 관하여 기술한다. 전기자동차가 언덕길 위에 정지한 상태에서 다시 출발할 경우에 차량이 뒤로 밀리는 현상이 발생한다. 따라서 탑승자의 안전과 편안함을 위해서 운전자의 브레이크 지령에 대한 제어기의 영속도 지령 수령 시, 차량은 움직이지 않고 계속 정지한 상태가 되어야 한다. 본 논문에서는 속도제어와 전류제어를 수행하기 위하여 기존의 PI제어기 대신 퍼지제어기를 적용해 영속도 제어를 수행하였다. 제어 성능은 시뮬레이션을 통하여 확인하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.19-27
• /
• 2017

In this paper, a simulator hardware and control design for an electronic parking brake (EPB) are proposed for emergency vehicle braking when the hydraulic break and anti-lock brake systems (ABS) fail to function. EPB systems are designed specifically for park braking and are usually installed on the rear wheels. However, in an emergency situation when all vehicle brake systems fail, the EPB can be utilized to stop the vehicle and track the target slip ratio as the ABS. This paper analyzed the non-linear EBP of the type of motor on caliper (MoC) based on experiments. A simulator hardware is also designed to validate the performance of the designed EPB controller in terms of braking distance and performance in tracking the target slip ratio. Through the experimental analysis, it is confirmed that a sliding mode controller can be applied on a non-linear EPB to track the target slip ratio.