• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.107-112
• /
• 1999

The ZnSe/GaAs epilayers were grown by RF reactive sputtering. In order to obtain the optimum condition of the growth, we have studied the dependence of Ar pressure, input power of sputter, temperature of substrate, and the distande between substrate and target. Through the observation of the grown epilayer via electronic microscope, we confirmed that the layer's surface was uniform and the boundary of the substrate and the layer was well defined. The defotmation of lattice distortion and the distortion ratio were obtained by DCRC measurements. From mrasurements of photoluminescence, in the ZnSe/GaAs sample without injection of $N_2$gas, we found that the intensity of bound exciton $I_2$is stronger than that of $I_1$and the bound exiton $I_1$represents the deep acceptor level, $I_1\;^d$. On the other hand, in the ZnSe/GaAs sample with injection of$N_2$gas, the peak of$I_1$ was much higher than that of the $I_2$and the half width appeared to be narrow. We concluded that the p-type of ZnSe/GaAs epilayer was grown successfully, because of stronger peak of the bound exciton $I_1$due to the $N_2$dopping.

• Journal of the Korea Society for Simulation
• /
• v.26 no.4
• /
• pp.35-41
• /
• 2017

With the advances in Internet over Things, the demand in diverse electronic devices such as mobile phones and sensors has been rapidly increasing and boosting up the researches on those products. Semiconductor materials, devices, and fabrication processes are becoming more diverse and complicated, which accompanies finding parameters for an optimal fabrication process. In order to find the parameters, a process simulation before fabrication or a real-time process control system during fabrication can be used, but they lack incorporating the feedback from post-fabrication data and compatibility with older equipment. In this research, we have developed an artificial intelligence based simulator, which finds parameters for an optimal process and controls process equipment. In order to apply the control concept to all the equipment in a fabrication sequence, we have developed a prototype for a manipulator which can be installed over an existing buttons and knobs in the equipment and controls the equipment communicating with the AI over the Internet. The AI is based on the deep learning to find process parameters that will produce a device having target electrical characteristics. The proposed simulator can control existing equipment via the Internet to fabricate devices with desired performance and, therefore, it will help engineers to develop new devices efficiently and effectively.

• Journal of KIISE:Software and Applications
• /
• v.31 no.3
• /
• pp.255-266
• /
• 2004

In the Web-based information systems, separating the business process logic from the data and presentation logic brings about a wide range of advantages. However, this separation is not easily achieved; even the data logic may be not separated from the presentation layer. So, it requires to define an model for business processes, and then to map the model into the user's dynamic interface using the logic separating strategy. This paper presents a stylesheet method to recognize the process by extending XSLT (Extensible Stylesheet Language Transformations), in order to achieve the logic separation. To do this, it provides an specification of the business process, and a scheme that extracts business model factors and their interactions using a Petri-net notation to show the business model into the process point of view. This is an attempt to separate users' interaction from the business process, that is, dynamic components of interaction Web document from the process structure of Web applications. Our architecture consist mainly of an XSLT controller that is extended by a process control component. The XSLT controller is responsible for receiving the user requests and searching the relevant templet rule related to different user requests one by one. Separation of concerns facilities the development of service-oriented Web sites by making if modular. As a result, the development of service-oriented Web sites would be very easy, and can be changed without affecting the other modules, by virtue of the modularization concept. So, it is easy to develop and maintain the Web applications in independent manner.

• Journal of Korea Spatial Information System Society
• /
• v.1 no.2 s.2
• /
• pp.63-80
• /
• 1999

This study presents NGDM(National Geospatial Information Distribution Model) in order to effectively utilize and differently apply geospatial information which is important in the dispersion of GIS. In order to establish the NGDM, this study draws the guideline of NGDM in Korea by analyzing its present condition of domestic and foreign geospatial information distribution. It also investigates some major factors forming the infrastructure of NGDM in regulative, technical, physical, and social aspects. Based on these factors, this study presents a three-staged NGDM that is applicable in Korea. The NGDM consists of four components that are the consumer, supplier, gateway for the clearinghouse and the clearinghouse of the geospatial information. According to the management form of geospatial information, the types of NGDM are classified as the concentration type, the distribution type, and compound type. Also, this study explains the mutual relationship between the NGDM's components and suggests a three-staged NGDM of planting, growth, and maturity period considering comparison results of classified models and development direction of regulation, protocol, communication network, electronic commerce, and etc.

• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.194-200
• /
• 2006

Self-assembled InAs/InAl(Ga)As quantum dots (QDs) were grown on InP substrates by a molecular-beam epiaxy, and their structural and optical properties were investigated by atomic force microscopy (AFM), transmission electron microscopy (TEM), and room-temperature photoluminescence (PL). AFM images indicated that the InAs quantum structures showed various shapes such as quantum dashes, asymmetric and symmetric QDs mainly caused by the initial surface conditions of InAl(Ga)As with the intrinsic phase separation. For the buried InAs QDs in an InAlGaAs matrix, the average lateral size and height of QDs were 23 and 2 nm, respectively. By changing the growth conditions for the QD samples, the emission wavelength of $1.55{\mu}m$ was obtained, which is one of the wavelength windows for fiber optic communications.

• Annual Conference on Human and Language Technology
• /
• 2003.10d
• /
• pp.246-251
• /
• 2003

한국어의 언어적 특성에 의해 빈번하게 등장하는 명사와 기능어의 나열은 기능어나 연결 구문의 잦은 생략현상에 의해 복합 명사의 출현을 발생시킨다. 따라서, 한국어 분석에서 복합 명사의 처리 방법은 매우 중요한 문제로 인식되었으며 활발한 연구가 진행되어 왔다. 복합 명사의 의미 결정은 복합 명사구 내 단위 명사간의 의미적인 수식 관계를 고려하여 머리어의 선택과 의미를 함께 결정할 필요가 있다. 본 논문에서는 정보 검색의 색인어 추출 방법에서 사용되는 복합 명사구 내의 서술성 명사 처리를 이용하여 복합 명사의 의미 결정을 인접 명사의 의미 공기 정보가 아닌 구문관계에 따른 의미 공기 정보를 사용하여 분석하는 방법을 제시한다. 복합 명사구 내에서 구문적인 관계는 명사구 내에 서술성 명사가 등장하는 경우 보-술 관계에 의한 격 결정 문제로 전환할 수 있다. 이러한 구문 구조는 명사 의미를 결정할 수 있는 추가적인 정보로 활용할 수 있으며, 이때 구문 구조 파악을 위해 구축된 의미 제약 조건을 활용하도록 한다. 구조 분석에서 사용되는 격틀 정보는 동사와 공기하는 명사의 구문 관계를 분석하기 위해 의미 정보를 제약조건으로 하여 구축된다. 이러한 의미 격틀 정보는 단문 내 명사들의 격 결정과 격을 채우는 명사 의미를 결정할 수 있는 정보로 활용된다. 본 논문에서는 현재 개발중인 한영 기계 번역 시스템 Tellus-KE의 단문 단위 대역어 선정을 위해 구축된 의미 대역패턴인 동사구 패턴을 사용한다. 동사구 패턴에 기술된 한국어의 단문 단위 의미 격 정보를 사용하는 경우, 격결정을 위해 사용되는 의미 제약 조건이 복합 명사의 중심어 선택과 의미 결정에 재활용 될 수 있으며, 병렬말뭉치에 의해 반자동으로 구축되는 의미 대역 패턴을 사용하여 데이터 구축의 어려움을 개선하고자 한다. 및 산출 과정에 즉각적으로 활용될 수 있을 것이다. 또한, 이러한 정보들은 현재 구축중인 세종 전자사전에도 직접 반영되고 있다.teness)은 언화행위가 성공적이라는 것이다.[J. Searle] (7) 수로 쓰인 것(상수)(象數)과 시로 쓰인 것(의리)(義理)이 하나인 것은 그 나타난 것과 나타나지 않은 것들 사이에 어떠한 들도 없음을 말한다. [(성중영)(成中英)] (8) 공통의 규범의 공통성 속에 규범적인 측면이 벌써 있다. 공통성에서 개인적이 아닌 공적인 규범으로의 전이는 규범, 가치, 규칙, 과정, 제도로의 전이라고 본다. [C. Morrison] (9) 우리의 언어사용에 신비적인 요소를 부인할 수가 없다. 넓은 의미의 발화의미(utterance meaning) 속에 신비적인 요소나 애정표시도 수용된다. 의미분석은 지금 한글을 연구하고, 그 결과에 의존하여서 우리의 실제의 생활에 사용하는 $\ulcorner$한국어사전$\lrcorner$ 등을 만드는 과정에서, 어떤 의미에서 실험되었다고 말할 수가 있는 언어과학의 연구의 결과에 의존하여서 수행되는 철학적인 작업이다. 여기에서는 하나의 철학적인 연구의 시작으로 받아들여지는 이 의미분석의 문제를 반성하여 본다.반인과 다르다는 것이 밝혀졌다. 이 결과가 옳다면 한국의 심성 어휘집은 어절 문맥에 따라서 어간이나 어근 또는 활용형 그 자체로 이루어져 있을 것이다.으며, 레드 클로버 + 혼파 초지가 건물수량과 사료가치를 높이는데 효과적이었다.\ell}$ 이었으며 , yeast extract 첨가(添加)하여 배양시(培養時)는 yeast extract 농도(濃度)가 증가(增加)함에 따라 단백질(蛋白質) 함량(含量)도 증가(增加)하였다. 7. CHS-13 균주(菌株)의 RNA 함량(

• Journal of The Korean Association of Information Education
• /
• v.1 no.1
• /
• pp.82-91
• /
• 1997

The purpose of thesis is to design and implement an efficient Internet-Based courseware which facilitates the problem solving learning. This courseware was developed in order to provide important foundations of learning in open-education environment using WWW. The targeted level is elementary students, To do this, the definition of problem solving, its processes, and advantages or pitfalls of computer-based problem solving learning were examined, with the advantage of using WWW as an educational tool. The theme of implemented courseware was selected from SATIS which is relevant for the problem solving learning. The courseware has three main parts; learning activity module, teaching activity module, and learning tool module. The learning activity module controls courseware flows and was implemented in accordance with the problem-based teaming processes. It: can be proceeded either sequential way or random access by setting linker. The advantage of random accessing method is that it may facilitate student learning because each student can regulate their learning processes which correspond to their own experiences. The teaching activity module provides for teachers useful informations for helping student's learning and it also can be used as an assessment tool for student's achievements, The learning: tool module consists of conversational note, e-mail address, help, and search tool. It is linked with learning activity module and teaching activity module so that teachers and students can actively participate in teaching-learning processes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.753-760
• /
• 2009

In this paper, a novel planar spiral antenna of multi-tabs is proposed for wireless power transmission system based on low frequency magnetic inductive coupling. The proposed antenna has higher transmission efficiency than conventional antennas such a rectangular spiral antenna and a spiral antenna. Also, it has a useful property of uniform power transmission in the region of the antenna aperture. For verification, a transmitting antenna and a receiving one for a wireless power transmission system using magnetic inductive coupling of 132 kHz low frequency are designed and tested. The transmitting antenna has three-tabs spiral of unequal-space for higher uniform magnetic coupling in the antenna aperture. For reducing the receiving antenna size, two receiving antennas of unequal space two-tabs on one-side and series double sides as well are designed, respectively. From measurement, transmission efficiency of the proposed antennas is improved up to $3{\sim}10$ dB compared to conventional antennas.

• Journal of the Korean Society for Library and Information Science
• /
• v.46 no.2
• /
• pp.29-54
• /
• 2012

This study aims to grasp what factors affect users' recognition level and expectation level for library service, being offered at the library of Korea National Open University. Also, this study seeks to conduct a survey and analyze whether users' recognition level by library service dimensions has actually influenced the intention and the satisfaction with using the library. For this, it carried out the theoretical approach, which considers domestic and foreign documents on evaluation of quality of library service, and the empirical approach of questionnaire research and analysis. A research model was designed on the basis of LibQUAL+model to achieve the objective of this research. And the group-based difference was confirmed by carrying out verification on research hypothesis. As a result of analysis, the users' current recognition level by library service dimensions of Korea National Open University was indicated to have influence on the whole satisfaction with library and the continuous use intention. The whole satisfaction was indicated to have an effect on continuous use intention. Also, to enhance users' satisfaction level according to the behavioral characteristics of using library, the core elements for improving the library service of Korea National Open University were cited and these include improving the facility of library, implementing smart digital library system for offering remotely academic information, and securing diversity and currency of academic information sources such as printing materials and electronic materials.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.166-174
• /
• 2000

Anchovy, EngrauEis japonica scoop nets are used in the coastal of Southern and Cheju of Korea. Especially in the Cheju, the fishing gear of scoop nets consists of upper boom, lower boom, pressing stick and bag net. They are operated by fishing boats of 6 to 10 ton class and 8 persons on board. The booms are controlled by side drum, and the net and pressing stick are hauled by only human power in operating. Therefore this fishery needs to large labor and heavy human power and has much risk. Three kinds of hydraulic winding device which controls two booms was designed and manufactured to reduce heavy labor force of scoop nets, and trial in the sea was carried out to test their performances using the commercial fishing boats of 6 ton class. The proper capacity of hydraulic pump and motor were determined by model test of boom 1/5 scale. The results obtained are as follows, 1. Tension of boom which is being drawn was the strongest and 187.5kgf when the boom's end is in the depth of 4m under the water. 2. The hydraulic motor of the fittest kind of winder has the least leakage per time than the other kinds. 3. In the best type of several winder devices, when the pressure difference was fixed $130kg/^2$ for the safe fishery, the winding velocity of boom line was 2m/sec, is faster 0.48/sec than traditional fishing method and this winder can catch the anchovy of 1.6 tonnage. 4. As a result, the crew were decreased from 8 to 6 and the problem of heavy human power and risk on fishing operation were solved by using the this winder.