• KIPE Magazine
• /
• v.7 no.1
• /
• pp.26-29
• /
• 2002

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.2
• /
• pp.22-27
• /
• 1978

An improved active R filter is proposed which contains only resistors and two operational amplifiers represented by their single pole model. The filter has very low sensitivities to all circuit parameters, is suitable for low frequency and low 9 applications in addition to high frequency and high 0, and realizes various biquadratic transfer functions simultaneously with lower resistance ratios. The independent control of design specifications is possible in the circuit. Experimental results in laboratory are presented.

• Journal of IKEEE
• /
• v.12 no.3
• /
• pp.167-171
• /
• 2008

A bridge resistance deviation-to-frequency (BRD-to-F) converter is presented for interfacing resistive sensor bridges. It consists of a linear operational transconductance amplifier (LOTA), a current-controlled oscillator (CCO). The prototype converter was simulated using commercially available discrete components. The result shows that the converter has a conversion sensitivity amounting to 16.90 kHz/${\Omega}$ and a linearity error less than ${\pm}$0.03 %.

• Electrical & Electronic Materials
• /
• v.2 no.2
• /
• pp.143-151
• /
• 1989

본 논문은 압전 세라믹스 재료를 사용한 장방형 압전 변압기의 승압특성에 관한 연구이다. 승압기구 분석을 위하여 진동모드에 따른 주파수 Spectrum을 구동부측곽 발전부측에 대해 각각 조사하였다. 시편구조(전극길이, 두께, 폭)에 따른 진동상태와 승압비를 평가하고 압전 변압기로써 가져야 될 최적조건을 제시하였다. 또한 부하저항에 병렬로 연결된 등가손실저항과 발전부 공진임피던스 사이의 관련성을 검토하였다.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.97-104
• /
• 2011

In the dielectric resonator method, which has been widely used for measuring the microwave surface resistance of superconductors, accuracies in the geometrical factors (G-factors) affect the uncertainty in the measured surface resistance. We compare the G-factors of short-ended sapphire resonator as obtained by using field analysis with those by using computer simulations: The former is obtained by using the analytic expressions for the electric and the magnetic field components inside the resonator, and the latter by using computer software. The G-factors as obtained by using the latter appear to be closer to those obtained by using the former as the resonator space is divided into larger number of sub-space, i.e., a tighter mesh, with a difference of ~8 % observed for a mesh of 14400 sub-spaces reduced to ~2 % for 114996 sub-spaces. Variations in the relative uncertainty in the surface resistance of typical $YBa_2Cu_3O_{7-\delta}$ superconductor films with those in the G-factors are studied, which provides an upper limit of the relative uncertainty in the G-factors required for realizing the target uncertainty in the surface resistance. These results could be useful in estimating the optimum number of meshes for obtaining the G-factors through computer simulations.

• Journal of Korean Electronics
• /
• v.2 no.2
• /
• pp.59-65
• /
• 1982

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.636-641
• /
• 2019

A simple resistance deviation-to-time period converter is proposed for interfacing resistive half-bridge sensors. It consists of two 2nd generation current conveyors(CCIIs). The proposed converter has simpler circuit configuration than the conventional converters using operational amplifiers or operational transconductance amplifiers(OTAs). The proposed converter was simulated using CCII implemented with AD844 IC chips. The simulation results show that the converter has a conversion sensitivity of $0.01934ms/{\Omega}$ over a range of $100-500{\Omega}$ resistance deviations and a linearity error less than ${\pm}0.002%$.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.50-54
• /
• 1983

Contact resistance variation which may be called sliding noise in carbon film variable resistors whose resistance elements consists of linear resistivity distribution were measured with several kinds of sliders and were analyzed to reduce the contact resistance variation. About the measuring method, the standard method of measuring contact resistance variation specified by the variable Resistance Components Institute was adupted. By analyzing the experimental results, it has been shown that the primary cause of contact resistance variation is due to current constriction and small discharge sparks in the resistance film in the area close to the slide contact. Moreover, it has been found that the sliding noise would be reduced by increasing the number of contact points, sliding speed, and pressure, and by using some kinds of insulation oil on the contacting surface. High contact resistance variation is likely to occur in the area of high resistance variation in a logrithmic resistance taper.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.8-15
• /
• 2003

In this paper, the issue of the differential ring oscillator in designing low phase noise is linearity improvement of delay cell's load resistor. A novel differential delay cell that improves on the Maneatis load is proposed. The linearity improvement of load resistor results in lower phase noise in ring oscillator. For comparison of the phase noise characteristics, Ali Hajimiri's phase noise model is used. In order to have a low ISF(impulse sensitivity function), it is important to have a symmetry between rise time and fall time of oscillation waveform. The ISF value of ing oscillator based on the proposed delay cell is lower than that of the existing ring oscillators. Due to this result, the phase noise is improved by 2~3dBc/Hz for the same power dissipation and oscillation frequency.

• Journal of Korean Electronics
• /
• v.3 no.9
• /
• pp.64-66
• /
• 1983