• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.116-121
• /
• 1997

The optical power drift due to temperature variation of a laser diode driven by constant voltage is different from one driven by constant current. When a laser diode is driven by constant current, the optical output decreases as the temperature increases because the population inversion decreases. However, When it is driven by constant voltage, injection current increases with temperature rise, which in turn increases the optical power. As the result, the optical power variation reduces. Experimental results show that when these two components are almost equal and cancel each other, the optical power variation coefficient is very small and the optical output is stable.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.51-51
• /
• 2009

Thin Cross 초음파모터의 구조는 그림 1(a)와 같이 크로스형태의 얇은 스테이터에 윗면과 아랫면에 각각 8개의 압전세라믹이 부착된 형태이다. 압전세라믹의 분극방향은 로터와 접촉하는 스테이터의 중심부인 네 개의 타 점에서 순차적인 타원변위가 생성되도록 결정된다. 유한요소해석프로그램인 ATILA 5.2.4를 사용하여 최적설계된 모델을 제작하였고, 푸쉬풀 게이지, x-y 스테이지, rpm 메타, 토크 게이지를 이용하여 구동시스템을 구성하였다. 그림 1(b)는 마이크로컨트롤러(ATmega)를 이용한 구동 드라이버를 보여준다. 한 주기에서 1/4분주의 순차적인 네 개 의 구형파를 생성하고, 이를 push-pull회로를 통하여 90도의 위상차가 나는 정현파를 생성하여 초음파 모터의 구동 전원으로 사용한다. 피드백 회로인 맨코더와 AD 컨버터는 정속도 운전을 위해서 사용되었다. 제안된 구동드라이버를 이용하여 측정한 결과, 기존의 제품화된 드라이버와 비교하여도 특성의 큰 차이를 보이지 않았으며 피드백 회로를 통하여 부하변화에 따른 속도의 극심한 변화를 비교적 안정화 시킬 수 있었다. 입력전압을 증가시킬수록 속도는 선형적인 증가를 보였고 토크는 이와 반대로 감소하는 특성을 보였다. 피드백 제어회로가 없는 경우에는 프리로드 변화에 따른 극심한 속도 변화를 보였고, 피드백 제어를 하였을 경우에는 0.2~0.4[N]의 범위에서 정속도 운전이 가능함을 확인하였으며, 장시간의 운전에도 온도 및 속도특성이 안정적인 특성을 보였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.23-30
• /
• 2011

This paper presents a Single-Inductor Multiple-Output (SIMO) DC-DC Converter with a negative feedback selection circuit to improve a regulation property at light load and to generate independent multiple outputs. The conventional SIMO DC-DC converter with a fixed negative feedback circuit cannot regulate correctly at light load. The SIMO DC-DC converter with the proposed negative feedback selection circuit has been designed in 0.35um 2-poly 3-metal BCDMOS. This converter is dual output boost converter with the 1.5V input and 2.5V, 3.0V output. The power conversion efficiency varies from 59% at 10mA loads to 85% at 50mA loads.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.993-1000
• /
• 2018

This paper proposes a low-dropout voltage regulator(LDO) using self-cascode structure. The self-cascode structure was optimized by adjusting the channel length of the source-side MOSFET and applying a forward voltage to the body of the drain-side MOSFET. The self-cascode of the input differential stage of the error amplifier is optimized to give higher transconductance, but the self-cascode of the output stage is optimized to give higher output resistance, The proposed LDO using self-cascode structure was designed by a $0.18{\mu}m$ CMOS technology and simulated using SPECTRE. The load regulation of the proposed LDO regulator was 0.03V/A, whereas that of the conventional LDO was 0.29V/A. The line regulation of the proposed LDO regulator was 2.23mV/V, which is approximately three times improvement compared to that of the conventional LDO. The transient response of the proposed LDO regulator was 625ns, which is 346ns faster than that of the conventional LDO.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.199-205
• /
• 2015

This study is about ionic water generator filter Recently, a lot of people feel deep interest in health and drinking water. And there are various types of water. Ionic water generator is a system with special function, and can be classified as a medical device and should be manufactured after approval from the Food and Drug Administration. Basically ionized water is different from the packaged and stored water. When the tap water or ground water passes through the various filters of ionic water generator, it turns to the purified water of pH7 ~ 7.5 and we can electrolyze that water into anion and cation by diaphragm. And in negative electrode side, we can get alkaline water with calcium ($Ca^+$), potassium ($K^+$), magnesium ($Mg^+$), sodium ($Na^+$) for body. In general, we can change pH value from 5 to 9 of ionizer by controlling the level of electrolysis voltage in the ionizer. In general, 1stage (pH8), 2stage (pH8.5), 3stage (pH9), 4stage (pH9.5) are used as the alkaline ionized water, -1Stage (pH6.0), -2 stage (pH5.0) are used as the acidic water. But in early stage, the water that passed through filter was weakly alkaline water and that was problem. Therefore, when filter condition is stable, the pH and ORP value of water is different with the early one. the initial setting pH value of the ionizer was confirmed that changes significantly. In order to resolve this problem we need to wash filter for some period time and neutralize by acidification treatment of the filter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.128-137
• /
• 1999

Recently the pelionnance of CO2 arc welding machine has been advanced significantly through the adoption of i invelter circuit topology. which made it possible to improve welding perfonnances such as spatter generation and bead s state. But the conventional inverter arc welding machine generates constant output voltage which cause much spatter g generation dUling short-circuit and arc start time because it is unable to control output current instantaneously. So this p paper representes wavefCnm controlled inverter arc welding machine which control the wavefonn of welding current and t thus to suppress the spatter generation. And the system designed in this paper is the digital controller using single chip m microprocessor of 80C196KC. As a result of perfonnance test for this system, the spatter generation is reduced and s shOlt-circuit time period is stabilized compared to conventional one. And more by using switched mode rectifier for A AC/DC power convelter. unity power factor is maintained and low order halmonic spectrum is supressed.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.4
• /
• pp.37-41
• /
• 2014

Pulse electrokinetic technology is proposed for improving the dewatering-process from clay-sandy soil. Proposed electrokinetic technology is to be the dewatering process due to fluid movement of current flow for the stability of clay-sandy soils. Samples produced in this study were completed to verify the proposed performance for 7 days by gradually increasing the pressure to the final pressure of 30 psi ($2.11kgf/cm^2$) through the compression process. In this study, pulse electrokinetic treatment and conventional continuous electrokinetic treatment are tested and observed, respectively. The condition of continuous electrokinetic treatment is a continuous process during 48 hours. And the condition of pulse electrokinetic treatment system is to interrupt the power three times for 48 hours, every 8 hours. These treatments are that the voltage gradient is 3 V/cm. As a result, the efficiency of pulse electrokinetic is similar to the continuous electrokinetic. The power consumption efficiency of pulse electrokinetic is better than continuous electrokinetic.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.245-250
• /
• 2015

We have developed an optical video transmission device for HD-SDI signal transmission. The optical transmitter/receiver unit operates at DC 5 volt and small enough to be attaced near surveillance camera. They have internal voltage regulating circuits to supply 3.3V to other circuits inside the unit. The optical transmitter is composed of cable driver, laser diode driver, and laser diode. The optical receiver is composed of photodiode, limiting amp, and cable equalizer. The wavelength of the trasmitter was 1.3 um, and optical power was -5dBm, and the speed was 1.485Gbps. The receiver sensitivity was -23 dBm. We confirmed that the optical device can transmit HD-SDI video through 30 km optical fiber without any interruption.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.853-861
• /
• 2018

This paper proposes the application of harmonic constraints to address the problems caused by abnormal voltage increases when electric railway vehicles are running. The AC line that supplies the train with power during operation is used to provide electricity of 25kV/60 Hz, but gradually the size and frequency of harmonics involved in the line are varied with the technological evolution of the railroad vehicle electrical equipment. An increase in heat losses due to the failure of the instrument transformer (PT), the main circuit device, which is a serious problem with the recent train safety operation, or to the main displacement voltage. When high frequency components are introduced through low frequency Transformers of the main circuit device, the high intensity of the components is caused by the high intensity of the core and the current flow of the parasitic core is increased, thus generating heat. To solve this problem, the recent adjustment of the sequence has applied artificial NOTCH OFF of the power converter. However, the method of receiving and controlling the OFF signal operates by interaction between the ground and the vehicle's devices, thus it is invalid in the event of failure, and an actual accident is occurring. Therefore, the harmonic currents were required to prevent possible flow of harmonics, and conducted a study to prevent accidental occurrence of train accidents and to verify feasibility of the device through the simulations of the train's experimental analysis and the simulations of the train for safe operation.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.74-74
• /
• 2001

난자 동결방법의 선별은 보다 효과적인 난자은행의 개발에 필수 불가결한 중요한 요소이다. 이전의 연구에서 마우스의 난자를 ethylene glycol과 electron microscope grid를 이용한 유리화 동결법으로 동결 융해한 결과 기존의 slow freezing 방법에서보다 높은 생존율과 배발달율이 나타남을 관찰하였다. 그러나 동결융해후의 난자는 방추사와 염색체의 이상성이 대조군에 비해 높은 빈도로 나타나 융해후의 배발달율을 감소시키는 것으로 보고되었다. 이에 본 연구에서는 유리화동결법동안 항동해제에 Cytoskeleton system을 안정화시키는 cytoskeleton stabilizer인 taxol을 첨가시킨후 동결시켰을때 생존율과 발달율을 개선시킬 수 있는지 알아보고자 본 실험을 시행하였다. ICR mouse의 성숙란을 채취하여 연구목적에 따라 taxol을 첨가시키지 않은 대조군과 첨가시킨 실험군으로 분류하였다. 동결방법은 난자를 1.5 M ethylene glycol (EG)에 2분 30초간 노출시킨후 5.5 M EG와 1 M sucrose가 첨가된 동결액에 20초간 노출시킨 후 Grid에 난자를 부착시킨후 직접 액체질소에 침지하여 동결하였다. 동결후 난자는 5단계로 융해를 실시한 후 정자와 체외수정을 시킨 후 수정된 난자는 modified P1 배약액에 124 h까지 발달율을 관찰하였고, 배양 후 발달된 배반포는 대조군과 실험군, 각각 4마리의 발정동기화된 recipient에 이식을 시행하였다. 배발달율은 대조군에 비해 실험군에서 4세포기 (48 vs. 84.4%), 8세포기 (34% vs. 70.6%), 상실배 (26% vs. 58.6%) 그리고 배반포 발달율은 (24% vs. 58.6%)로 높게 관찰되었다. 배아이식후 대조군과 실험군에서 각각 2 마리가 임신이되어 정상적인 산자를 분만하였다. 따라서 항동해제에 taxol의 첨가는 동결 융해후의 난자의 배발달율을 증진시킬 수 있었다..8%로 나타나 난할율 및 배반포 발생율에 있어서 융합조건에 따라 큰 차이는 없었으나 1.9㎸/cm, 30$\mu\textrm{s}$ 2회의 조건이 다른 조건들에 비하여 유의적으로 낮았다. 따라서, 체세포와 수핵란 세포질간의 융합율과 배반포 발생에 미치는 영향은 전압보다는 시간에 더 크게 받음을 알 수 있었으며, 이와 같은 결과에서 융합시 시간을 오래 주는 것보다 전압을 높이는 것이 수핵난자의 세포질에 상해를 줄이고 이후 배반포 발생에 유리할 것으로 사료되었다.면에서도 더욱 더 활발할 것으로 기대된다. 배란후 72시간째에 초음파진단기를 이용하여 난소의 난포발달을 조사한 결과 , 대조구와 bFF처리구에 비해 AI처리구에서 발달난포가 유의적으로 많은 것을 확인하였다. 이상과 같은 결과로, Anti-inhibin serum은 한우 자체에서 분비하는 Inhibin을 특이하게 억제하여 Inhibin에 의해 억제되는 FSH분비가 촉진됨으로써 난포발달과 estrogen의 농도가 촉진되는 것으로 사료되어 anti-inhibin serum이 한우의 과배란유기 효과가 있는 것으로 사료된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group". And the issues were high risk perception in general setting and