• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.2
• /
• pp.161-165
• /
• 2012

It is one of the most important to protect the battery over charging for stable use and to extend the life of battery which occurs with repeated charging and discharging. Various research have been studied to know the state of health, and in this paper the terminal voltage of battery is measured to calculate the state of charge simply. The circuit used comparator is designed and built not to fall under the specific voltage of battery. The designed circuit board is attached to the automatic water sanitizer device with a solar power system. The system is located in the water tank where there is not water and electric service, and confirmed that the state of working is good.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.132-139
• /
• 2020

The ionizer module used in this air cleaner supplies high voltages of 3.5KV / -4KV to the discharge electrode HV+ / HV- using a winding transformer to generate positive and negative ions by electric field radiation of carbon fiber brush. The ionizer module circuit using the existing MCU has the disadvantage of large PCB size and expensive price, and the gate driver chip using the existing ring oscillator has oscillation period sensitive to PVT (Process-Voltage-Temperature) fluctuation and there is risk of fire or electric shock because there is no fault detection function by short circuit of HV+ and GND as well as HV- and GND. Therefore, in this paper, even though PVT fluctuates, by using 7-bit binary up counter, HV+ voltage reaches the target voltage by adjusting oscillation period. And an HV+ short fault detection circuit for detecting a short circuit between HV+ and GND, an HV- short fault detection circuit for detecting a short circuit between HV- and GND, and an OVP (Over-Voltage Protection) for detecting that HV+ rises above an overvoltage are newly proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.425-431
• /
• 2011

The harmonic distortion level may be significant in electric propulsion systems, as the main loads usually are variable speed propulsion/thruster drives. Distortion of currents and supply voltage waveforms may lead to: Increased power dissipation(losses) in equipment connected to the network, such as generators, motors, transformers, cables, etc., from the harmonic currents, may cause overheating and deterioration of the insulation, and reduced life time of the equipment. In this paper introduced the canceling method of harmonic currents by a multipulse drive with phase shifting transformer. The simulation results indicated a good speed response to the middle speed range of electric propulsion motor. And also, THD(total harmonic distortion) and torque ripple could be reduced in comparing the 12-pulse drive with 6-pulse drive.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.43-49
• /
• 2021

This research shows how is designed, and its performance is evaluated on the ground for the VTOL drone before the flight test initiates. The targeted drone weight is approximately 45 kg including battery packs, and 4 motors are utilized to produce thrust and control directions. 30 min flight schedules were simulated to estimate the total power consumptions which result in 2.4 kWh. Then, two packs of 13-cells lithium-polymer battery with operating voltage ranging between 54 V and 44 V with up to 4 C-rate were fabricated to safely operate a VTOL drone. Moreover, the battery management system was installed to prevent over and under-voltage and over-current while running a battery system. To finally verify battery's performance, we conducted a ground evaluation for discharging battery tests at -10 ℃, 25 ℃ and 40 ℃, resulting in satisfying simulated power consumption conditions for flight schedules.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.302-312
• /
• 2012

In this paper, small-area and high-reliability design techniques of a 512-bit EEPROM are designed for UHF RFID tag chips. For a small-area technique, there are a WL driver circuit simplifying its decoding logic and a VREF generator using a resistor divider instead of a BGR. The layout size of the designed 512-bit EEPROM IP with MagnaChip's $0.18{\mu}m$ EEPROM is $59.465{\mu}m{\times}366.76{\mu}m$ which is 16.7% smaller than the conventional counterpart. Also, we solve a problem of breaking 5V devices by keeping VDDP voltage constant since a boosted output from a DC-DC converter is made discharge to the common ground VSS instead of VDDP (=3.15V) in getting out of the write mode.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.34-41
• /
• 1998

An integrated circuit for magnetic stripe storage system is implemented. All the analog and digital circuits are integrated in one chip. The analog block contains preamplifier, peak detecter, comparator and reference generater. And digital block includes reference window signal generater, up/down counter for F/2F signal measurement, bit-error detection logic, and control logic. Both the encoding and decoding functions for F/2F signal processing are provided. An AGC(automatic gain control) circuit which was included in conventional circuits is eliminated due to optimized circuit design. Misreading prevention circuits are also proposed by fixing up new reference bit when broken bits are detected. The prototype chip is implemented using $0.8{\mu}m$ N-well CMOS technology and operates from 3.3 V to 7.5 V of supply voltage. It occupies a die area of $3.04mm^2(1.6mm{\times}1.9mm)$ and dissipates 8 mW with a 5 V supply voltage.

• Composites Research
• /
• v.27 no.1
• /
• pp.25-30
• /
• 2014

The actuation performance of an EADE (Electro-active dielectric elastomer) is studied as functions of thinner content, thickness and types of the dielectric elastomer such as natural (NR), acrylonitrile-butadiene (NBR), and silicon (KE-12) rubbers. With a decrease in elastomer thickness ($1{\rightarrow}0.5{\rightarrow}0.25{\rightarrow}0.1{\rightarrow}0.05$ mm) and an increase in thinner content ($0{\rightarrow}30{\rightarrow}50$ phr), the actuating displacement of KE-12 elastomer is increased, however their breakdown occurs at low voltage. For the same thickness (1 mm), the displacement of KE-12 elastomer shows a higher value (2.24 mm) compared to that of NR or NBR at the same applied voltage of 25 kV. The KE-12 has the lowest elastic modulus and the NBR has the highest one among the tested elastomers. However, the displacement of NBR elastomer is higher compared to that of NR because of high dielectric constant. It is found that the important factors of EADE actuator are a thickness, modulus and dielectric constant of the elastomer.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.60-67
• /
• 2008

This paper presents a new full-bridge soft switching PWM DC-DC converter circuit topology that adding two switcher, two lossless snubber quasi-resonance capacity, two diode to power source for general welding machine. This half bridge soft switching Is low voltage hight current output that first coil current is smaller than second coil current in high frequency transformer can be obtained with decreasing path loss in conventional DC bus line switcher. As it operate ZCS/ZVS in full range, high frequency, high efficiency and high output are implemented at low voltage and high DC current switching power supplies. All of this items are got from simulation and the result of experiment. If make up for the weak points of this proposed circuit, it will be used more easily for next generation TIG, MIG and MAG type of arc-welding machine.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.528-535
• /
• 2011

In this paper, a compact doppler sensor with oscillator type active antenna operating at 2.4GHz frequency band is proposed to measure the distance to a moving object. The oscillation frequency is shifted depending on approaching of the object, and a detection circuit discriminates the frequency deviation. The active antenna has been designed and simulated. The prototype fabricated has a small circular disk type of diameter 30mm and height 4.2mm. As for antenna performance, broadside radiation pattern with beamwidth of $120^{\circ}$ and oscillation frequency of 2.35GHz has been measured. Test results as a range sensor shows that signal voltage of about 240mV has been obtained for conducting plate moving 1 meter away from the sensor. And, signal voltage has been linearly increased to the ground from 5m height by free-falling the sensor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6282-6288
• /
• 2014

$CO_2$ welding is used widely in the field. On the other hand, welding defects occur when welders cannot adjust the current and voltage needed for welding and have to stop working to adjust the current and voltage, causing sudden cooling down of the welding structure inside a vehicle or tank where the control panel is invisible or when work site is far. This study used three types of existing $CO_2$ welders. This also applied SS400 rolled steel for welding structural purposes for remote control torch welding, perform a welding test through v-groove butt welding with a remote control torch and existing $CO_2$ welding torch, conducted visual inspection on the appearance of a welded top bead. In addition, the appearance quality of the welding part was monitored mainly through penetrant testing and a bending test to evaluate the welding defect reduction and the effect on the performance and compatibility by replacing the existing welder.