• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.275-281
• /
• 2006

Simple-relay aided resource allocation (SRARA) schemes are incorporated with throughput guarantee scheduling (TGS) in IEEE 802.16 type time division duplex - orthogonal frequency division multiple access (TDD-OFDMA) downlink in order to enhance service coverage, where the amount of resources for relaying at each relay is limited due to either its available power which is much smaller than base station (BS) power or the overhead required for exchanging feedback information. The performance of SRARA schemes is evaluated with schedulers such as proportional fair (PF) and TGS at 64kbps and 128kbps user throughput requirements when total MS power is set to 500mW or 1 W. For 64kbps throughput requirement level, more improvement comes from relay than scheduler design. For 128kbps case, it comse from scheduler design than relay due to the fact that simple relay can't help using strictly limited amount of resources for relaying function.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.52-56
• /
• 2009

In this paper, we investigate the performance of the ARQ-aided downlink Time Switched Transmit Diversity (TSTD) in the WCDMA LCR-TDD system, when power ramping is applied. The proposed power ramping scheme ramps up the transmission power and then retransmits the data, when the receiver sends the response signal (ACK or NACK signal) to the transmitter and the response signal is NACK signal. Simulation results demonstrate that the proposed scheme yields about 0.7dB performance gain in terms of average Eb/N0, compared with the conventional ARQ-aided TSTD when a mobile speed is 3km/h and an frame error rate (FER) is 1%, respectively. In addition, 2.5% of throughput gain is shown when average Eb/N0 is equal to 0dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9A
• /
• pp.888-897
• /
• 2007

In this paper, we propose an uplink dynamic resource allocation algorithm to increase sector throughput and fairness among users in 802.16e OFDMA TDD system. In uplink, we address the difference between uplink and downlink channel state information in 802.16e OFDMA TDD system. The simulation results show that not only an increment of 10% of sector throughput but higher level of fairness is achieved by round-robin using the FLR and the rate / margin adaptive inner closed-loop power control algorithm. The FLR algorithm determines the number of sub-channels to be allocated to the user according to the user's position. Also, we get 31.8% more sector throughput compared with the round-robin using FLR by FASA algorithm using uplink channel state information. User selection, sub-channel allocation, power allocation algorithms and simulation methodology are mentioned in Part I.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.400-403
• /
• 1988

This study was conducted to evaluate the polishing process that affects the polishing properties and cooking qualities of cut-polished barley. Naked barley, Youngsanbori (Sedohadaka), which was produced in Cheonnam province, Korea in 1981, was cut and polished to have the polished yield per cent of four grades, 68.27, 72.85, 75.51 and 78.70, in contrast to the conventionally polished barley which was polished up to 70.10 per cent. Length. thickness and width of the kernels and weight of 1,000 kernels of the cut-polished barley were increased with improving the grade of the polishing yield. Energy consumption was found to be reduced according to increasing the polishing yield of the cut-polished barley. As polishing yield of the cut-polished barley were increased. the contents of P$_2$O$\_$5/, K$_2$O, MgO and Mn were increased. Also whiteness, water uptake and expanding volume of cooked barley were increased in accordance with upgrading the polishing yield of the cut-polished barley.

• Clean Technology
• /
• v.23 no.4
• /
• pp.388-392
• /
• 2017

In this study, a quantitative environmental impact assessment for the production process of breathable film was conducted employing Life Cycle Assessment (LCA) methodology. Among the various categories, Global Warming (GW) accounted for the highest impact (97%) followed by Human Toxicity (HT). And the key substances of various impact categories included HDPE, PP, and electricity. In the production process, the high impact resulted from mixing process (57%), lamination process (29%), and extruder process (10%). To improve environmental impact, it is necessary to design a new process system that reduces the amount of electricity used and that increases production yields, if raw materials such as HDPE and PP owe excluded.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.171.2-171.2
• /
• 2011

지속가능한 발전과 저탄소 녹색성장의 개념이 대두되면서 우리나라를 비롯한 주요 선진국은 자국의 화석연료 의존도를 낮추고 대체에너지로 환경친화적이며, 청정에너지로 각광받는 신 재생에너지의 활용에 경제적, 정책적 지원을 아끼지 않고 있는 실정이다. 실제로 유럽에서는 바이오매스의 일종인 우드칩을 활용한 가정용 보일러가 보급되고 있으며, 동남아시아에서는 열대식물을 이용한 저온열분해를 활용하여 바이오디젤을 생산하고 있다. 우리나라의 경우 대부분의 바이오매스는 발생되는 임야에서 재이용되거나 경제성이 있을 경우에 운송되어 재활용되고 있으며, 임부목과 같은 일부 바이오매스는 수익성이 없어 발생현지에 방치되는 경우도 있다. 본 연구에서 주목한 왕겨의 경우 미곡종합처리장에서 대량으로 발생되지만 그 활용도에 있어서 축적된 바이오에너지에 비해 에너지회수율이 저조하다고 할 수 있다. 왕겨는 임야에서 발생되는 폐목재나 다른 바이오매스에 비해 함유되어 있는 수분이 적고(12%), 휘발분의 함량이 많으며(58%), 고정탄소(17%), 회분(13%)로 열분해/가스화에 적용가능하다. 본 실험에서 생산된 합성가스의 활용방법으로는 보일러를 이용한 스팀 및 전력생산, 가스엔진을 이용한 전력생산, 폐열회수 등이 있으며 생산된 합성가스를 활용하기 위해서는 오염물질의 정제특성에 대한 연구가 선행되어야 한다. 따라서 본 연구에서는 합성가스 내에 존재하는 분진, 타르, HCl, HCN, $NH_3$의 제거효율을 조사하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.40-46
• /
• 2007

In this paper, the effect of a Doppler Spread caused by a mobile station (MS) is analyzed for transparent mobile multi-hop relays (MMR) systems based on orthogonal frequency division multiplexing (OFDM). The exact expression of interchannel interference (ICI) power and the upper bounds of ICI power are derived for OFDM systems with cooperative MMR or non-coopeartive throughput enhancement (TE) MMR. Also, the exact signal-to-interference ratio (SIR) and its lower bound as well as ICI power and its upper bound, derived in this paper, are evaluated by computer simulation with the OFDM parameter set used for mobile WiMax (WiBro) systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.518-518
• /
• 2012

공정 수율 향상을 위한 웨이퍼의 대면적화는 공정 반응용기의 부피변화를 수반한다. 반응용기의 부피가 커지면 플라즈마 내의 전자와 이온이 손실되는 면적이 증가하게 되고, 그 결과 공정결과에 직접적으로 영향을 미치는 전자온도와 전자밀도가 떨어지게 된다. 이렇게 변화된 플라즈마 변수들을 원래의 값으로 되돌리기 위해서는 인가전력, 실험압력, 유량과 같은 외부변수들이 조절되어야 하는데, 공간 평균 모델(global model) 식을 이용하여 외부변수들의 변량을 계산할 수가 있다. 본 연구에서는 부피가 다른 두 반응용기에서의 플라즈마 변수 진단을 통해서 부피가 커진 환경에서의 전자온도와 전자밀도가 떨어지는 현상을 관찰하였고, 공간 평균 모델로 계산된 외부변수들의 변량을 적용하였을 때 원래의 값으로 가까워 지는 경향을 볼 수가 있었다. 이렇게 같은 공정 결과를 얻기 위한 외부변수들의 변량을 간단히 계산함으로써 대면적화가 되었을 때 외부변수들을 얼마나 변화시켜야 하는지에 대한 일반적인 방향을 제시해 줄 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2541-2547
• /
• 2010

In this paper, we propose a design technique which replaces logic transistors of 1.2V with medium-voltage transistors of 3.3V having small off-leakage current in repetitive block circuits where speed is not an issue, to implement a low-power eFuse OTP memory IP in the stand-by state. In addition, we use dual-port eFuse cells reducing operational current dissipation by reducing capacitances parasitic to RWL (Read word-line) and BL (Bit-line) in the read mode. Furthermore, we propose an equivalent circuit for simulating program power injected to an eFuse from a program voltage. The layout size of the designed 512-bit eFuse OTP memory IP with a 90nm CMOS image sensor process is $342{\mu}m{\times}236{\mu}m$. It is confirmed by measurement experiments on 42 samples with a program voltage of 5V that we get a good result having 97.6 percent of program yield. Also, the minimal operational supply voltage is measured well to be 0.9V.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.401-407
• /
• 2016

This paper introduces 3-dimensional path planning and guidance including power model for high altitude long endurance (HALE) UAV using solar energy. Dubins curve used in this paper has advantage of being directly available to apply path planning. However, most of the path planning problems using Dubins curve are defined in a two-dimensional plan. So, we used 3-dimensional Dubins path generation algorithm which was studied by Randal W. Beard. The aircraft model which used in this paper does not have an aileron. So we designed lateral controller by using a rudder. And then, we were conducted path tracking simulations by using a nonlinear path tracking algorithm. We generate examples according to altitude conditions. From the path tracking simulation results, we confirm that the path tracking is well on the flight path. Finally, we were modeling the power system of HALE UAVs and conducting path tracking simulation during 48hours. Modeling the amount of power generated by the solar cell through the calculation of the solar energy yield. And, we show the 48hours path tracking simulation results.