• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.192-201
• /
• 2016

Condition Monitoring System (CMS) has been used to detect unexpected faults of wind turbine caused by the abrupt change of circumstances or the aging of its mechanical part. In fact, it is a very hard work to do regular inspection for its maintenance because wind turbine is located on the mountaintop or sea. The purpose of this study is to find out distribution patterns of vibration signals measured from the main mechanical parts of wind turbine according to its operation condition. To this end, acceleration signals of main bearing, gearbox, generator, wind speed, rotational speed, etc were measured through the long period more than 2 years and trend analyses on each signal were conducted as a function of the rotational speed. In addition, correlation analysis among the signals was done to grasp the relation between mechanical parts. As a result, the vibrations were dependent on the rotational speed of main shaft and whether power was generated or not, and their distributions at a specific rotational speed could be approximated to Weibull distribution. It was also investigated that the vibration at main bearing was correlated with vibration at gearbox each other, whereas vibration at generator should be dealt with individually because of generating mechanism. These results can be used for improving performance of CMS that early detects the mechanical abnormality of wind turbine.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2011

In order to performing the joint operation of Korean army efficiently, informations about surveillance, reconnaissance, and situation awareness need to be possessed jointly. In the first development phase (basis type) of the Korean joint tactical data link system (JTDLS-K), essential tactical information and recognized situation are owned among platforms in common by using existing wireless terminals. In the second development phase (completion type) of the JTDLS-K, a JTDLS which can perform network centric warfare (NCW) will be developed in due consideration of technology development of the basis type and common technology maturity degree. This is a joint battlefield system that can show fighting power simultaneous and polysynthetically through providing command and control messages effectively to each platform, which is participating in the joint and combined operations. In this paper, the development of JTDLS-K with a common data processor based on common link integration processing (CLIP) is described. From the test results of the system presented in this paper, it is demonstrated that quadrature phase shift keying (QPSK) signals can be applied to the system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.7-12
• /
• 2014

IETF (Internet Engineering Task Force) CoAP (Constrained Application Protocol) protocol is supported communication between sensor or actuator nodes by in a constrained environment, such as small amount of memory, and low power. CoAP and HTTP protocol can convert easily, and can use to monitor or controll the infrastructure utility through low-power sensor and actuator networks in IoT (Internet of Thing) and M2M (Machine-to-Machine) environment. IETF CoRE(Constrained RESTful environments) Working Group proposed CoAP protocol in 2010, and began to standardize it. Recently, CoAP protocol is published RFC (Request for Comments) 7252. In this paper, we design and implement of CoAP protocol for testing the interoperability in heterogeneous operating environments. For this experiment, we developed the CoAP client program based on Windows environment and CoAP server program in Linux environment to test the interoperability.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.295-309
• /
• 2019

This paper demonstrates that the verification and analysis of the increase of hosting capacity of distributed energy resources in distribution system for the high penetration of distributed energy resources. In the case of generally designed distribution feeders in South Korea, it can host up to 10 MVA of distributed energy resources and the over voltage due to reverse power flow is prohibited beyond the range by the law of electric utility. However, it should take into consideration that there are some factors of extra hosting capacity such as generation characteristics of distributed energy resources and minimum loads that always exist to distribution system. For these reason, we choose a specific distribution system hosted 10 MVA of distributed energy resources monitored by distribution system operator and verify the impact of increasing hosting capacity such as power flow and voltage profile of distribution system. By the result, we could find that it is possible to increase the hosting capacity and define the factors to expand the hosting capacity of distributed energy resources in distribution system.

• The Journal of the Korea Contents Association
• /
• v.7 no.2
• /
• pp.51-62
• /
• 2007

Recently microcontrollers are being used in sensor networks to handle sophisticated control and monitoring activities. As applications become more sophisticated, their design and development processes become more complex which consequently necessitates the use of an operating system to manage the complexity and provide an abstraction for portability of code. This paper presents a Low-power real-time operating system, called UbiFOS-USN, designed for sensor networks. We present some of the features that make UbiFOS-USN appropriate especially for small, low-cost microcontrollers typically found in sensor networks. Through experimental results, we show that UbiFOS-USN is quite efficient for a sensor network, both in terms of system performance and memory requirement.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.66-71
• /
• 2017

This paper describes implementation of a 165 MHz, 5 kW RF high power amplifier (HPA) for particle accelerator applications. The HPA consists of a drive amplifier for main amplifiers driving, sixteen 600 W class-AB push-pull power amplifier pallets and Wilkinson power divider/combiner using lumped LC components, which are divided/combined power amplifier pallet outputs. To detected the amplifier circuit of normal and reflected output power conditions, we used a bidirectional coupler. To radiate heat of main power amplifier, we were used an water-cooled copper plates to go through a water for radiation of heat. The HPA of center frequency 165 MHz has archived an efficiency of 62.5 % at 5 kW of power level experimentally.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.526-531
• /
• 2009

Recently, many interests on the ubiquitous environment and the practical technologies associated with it have been significantly increasing along with the rapid development of wireless technologies. The development of the automated systems based on the ubiquitous environment is required as the concept of the term "ubiquitous" is integrated into the fields of existing IT. In this paper, we design and implement a power-saving management system using RFID/USN technologies. It efficiently manages the power consumption of the electronic machine such as electric lights, electric heaters, and air conditioners in a building. The proposed system controls the electronic machines and monitors their status by RFID and collects the real time information about the surroundings and power consumption of the electronic machines by USN. Especially, it analyzes the real time information and supports the intelligent scheduler with the best power-saving. Finally, this paper shows the difference between the proposed system and the existing systems and the reality of our system through the real time user interface about the power-saving management.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.191-200
• /
• 2010

The "intelligent internet power outlets" realized in this study use Internet environment to connect electrical and electronic products to the Net as well as to enable remote monitoring and control. They also have temperature and light sensors, and even offer scheduling options by means of a universal calendar run by an inner real-time timer. Furthermore, they control 4 outlets handling 4 external input conditions and infrared remote control with easy-to-use functions for home automation control. The user interface is equipped with an embedded Web server and UDP protocol handler, and which also allows special control programs be used with the Web browser. Thus, installing this real-time power control function with optimal scheduling and various communication functions will provide you with energy-efficient power outlets outfitted with the increasingly popular "standby power" electric power efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3C
• /
• pp.281-292
• /
• 2008

A main application of sensor networks are to monitor and to send information about a possibly hostile environment to a powerful base station connected to a wired network. To conserve power from each sensor, intermediate network nodes should aggregate results from individual sensors. However, it can make it that a single compromised sensor can render the network useless, or worse, mislead the operator into trusting a false reading. In this paper, we propose a protocol to give us a key aggregation mechanism that intermediate network nodes could aggregate data more safely. The proposed protocol is more helpful at multi-tier network architecture in secure sessions established between sensor nodes and gateways. From simulation study, we compare the amount of the energy consumption overhead, the time of key transmission and the ratio of of key process between the proposed method and LHA-SP. The simulation result of proposed protocol is low 3.5% a lord of energy consumption than LHA-SP, the time of key transmission and the ration of key process is get improved result of each 0.3% and 0.6% than LHA-SP.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.10
• /
• pp.516-523
• /
• 2000

In this paper, intelligent methods using digital protective relay in power supervisory control system is developed in order to protect power systems by means of timely fault detection and diagnosis during operation for induction motor which has various load environments and capacities in power systems. The spectrum pattern of input currents was used to monitor to state of induction motors, and by clustering the spectrum pattern of input currents, the newly occurrence of spectrums pattern caused by faults were detected. For diagnosis of the fault detected, the fuzzy fault tree was derived, and the fuzzy relation equation representing the relation between an induction motor fault and each fault type, was solved. The solution of the fuzzy relation equation shows the possibility of each fault's occurring. The results obtained are summarized as follows: 1) The test result on the basis of KEMC1120 and IEC60255, show that the operation time error of the digital motor protective relay is improved within ${\pm}5%$. 2) Using clustering algorithm by unsupervisory learning, an on-line fault detection method, not affected by the characteristics of loads and rates, was implemented, and the degree of dependency by experts during fault detection was reduced. 3) With the fuzzy fault tree, fault diagnosis process became systematic and expandable to the whole system, and the diagnosis for sub-systems can be made as an object-oriented module.