• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.684-691
• /
• 2005

본 연구는 전달함수 합성법을 이용하여 보강후 구조물의 진동특성을 예측하는 방법이다. 이 방법은 보강후 구조물의 진동특성을 보강전 구조물의 전달함수를 이용하여 예측하는 기술로, 이에 관한 이론은 많이 알려져 있다. 하지만 실제 실험으로 전달함수를 계측할 경우 회전자유도에 대한 전달함수를 계측하기가 어렵다. 따라서 병진자 유도만으로 전달함수 합성법을 적용할 경우 발생하는 고유진동수 추정 오차를, 전체 자유도를 이용한 경우와 간단한 구조물의 수치해석을 통해서 비교해 보고자 한다.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.7
• /
• pp.213-220
• /
• 2020

The convolutional neural network is composed of convolutional layers and fully connected layers. The nonlinear activation function is used in each layer of the convolutional layer and the fully connected layer. The activation function being used in a neural network is a function that simulates the method of transmitting information in a neuron that can transmit a signal and not send a signal if the input signal is above a certain criterion when transmitting a signal between neurons. The conventional activation function does not have a relationship with the loss function, so the process of finding the optimal solution is slow. In order to improve this, an agile activation function that generalizes the activation function is proposed. The agile activation function can improve the performance of the deep neural network in a way that selects the optimal agile parameter through the learning process using the primary differential coefficient of the loss function for the agile parameter in the backpropagation process. Through the MNIST classification problem, we have identified that agile activation functions have superior performance over conventional activation functions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.88-93
• /
• 2008

This paper proposes a frequency transfer function synthesis of a later compensated PID controller for an approximated low order model. The proposed method identifies the parameter vector of PID controller from a linear system that is formed by rearranging a loop frequency transfer function synthesis including the filter compensated PID controller obtained from the given frequency response bounds. And an example for the turbine speed control system of Chungju hydropower plant is given to illustrate the feasibilities of suggested schemes.

• The Journal of the Korea Contents Association
• /
• v.5 no.6
• /
• pp.74-86
• /
• 2005

In this paper, we proposed an algorithm for the approximation of high order FIR filters by low order IIR filters to efficient implementing two channel 3-D surround sound systems using Head-related transfer functions(HRTFs). The algorithm is based on a concept of the balanced model reduction. The binaural sounds using the approximated HRTFs are reproduced by headphone, and serves as a cue of sound image localization. HRTFs of dummy-head are approximated from 512-order FIR filters by 32-order IIR filters and compare with each other. .Experiment of sound image are carried out for 10 participants. We perform the experiment based on computer simulation and hardware experiment with TMS320C32. The results of the experiments show that the localization using the approximated HRTFs is the same accuracy as the case of FIR filters that simulate the HRTFs.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.2
• /
• pp.31-42
• /
• 1975

In this paper is introduced a new method of constructing a grounded.ungrounded FDNR (Frequency Dependent Negative Resistance) pair. Open circuit village transfer functions of any order are readily realized using the pairs with RC elements and CGIC's whose admittance ronversion functions are proportional to s3. This method simplifies the realization of transfer functions of higher order, The transfer function of fifth order haying low- pass filter characteristics is realized by this method. The measured frequency characteristics show satisfactory results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.118-123
• /
• 2008

This paper proposes a frequency transfer function synthesis for approximating a high-order model with resonance to a low-order model in the frequency domain. The presented model approximation method is based on minimizing the error function weighted by the numerator polynomial of approximated models, which is used of the RLS(Recursive Least Square) technique to estimate the coefficient vector of approximated models. The proposed method provides better fitting in a low frequency and peak resonance. And an example is given to illustrate feasibilities of the suggested schemes.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.53-58
• /
• 2006

When the vibration troubles occur on the ship structure during the sea trial, the rectification work is very restricted because of in-situ limitation. Usually the finite element method is used to improve vibration characteristics of the structure, but it takes lots of time and effort in modeling the structure and adjusting the finite element model in order to consider appropriate boundary conditions of a complex ship structure. Therefore, experimental methods have been in general suggested to obtain proper countermeasures without time-consuming in modeling. In this paper, FRF(frequency response function) synthesis method is applied to estimate natural frequency of the modified ship structure, which is obtained from experimental and numerical methods.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.139-145
• /
• 1998

A great deal of effort has been invested in upgrading the performance and the efficiency of dynamic analysis of mechanical structures. Using experimental modal analysis(EMA) or finite element analysis(FEA) data of mechanical structures, the performance and efficiency can be effectively evaluated. In order to analyze complex structures such as automobiles and aircrafts, for the sake of computing efficiency, the dynamic substructuring techniques that allow to predict the dynamic behavior of a structure are widely used. Through linking a modal model obtained from EMA and an analytical model obtained from FEA, the best conditioned strucutres can be proposed. In this study, a new algorithm of substructre synthesis method, Multi-FRF synthesis method, is proposed to analyze a structure composed of many substructures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.50-55
• /
• 2009

In this paper, a distributed amplifier is designed using distributed network synthesis that provides the optimum absorption capability of a capacitance. Transfer functions of filters, which consist of the amplifier, are synthesized by a low-pass Chebyshev approximation. Capacitances that a filter network can absorb are calculated as a function of its minimum insertion loss(MIL) and ripple. Active devices in a distributed amplifier are modeled as equivalent circuits by using their S-parameters, and their equivalent capacitances are absorbed into filter structures by properly adjusting the MIL and ripple of a transfer function. As an application example, a distributed amplifier with the gain of about 12.5dB is designed that operates over the frequency range between 0.1 and 7.5GHz. Experimental results prove that distributed network synthesis, which considers capacitance absorption capability, is useful to the design of distributed amplifiers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1134-1138
• /
• 2008

In this paper, the synthesis of distributed impedance transformers is presented that is essential for power divider design, whereby a broadband power divider is designed. Transfer functions of distributed transformers are synthesized with Chebyshev approximation, and their element values are calculated for various minimum insertion losses(MIL) and ripples. Desired performance of transformers is obtained by optimizing MIL's and ripples of a transfer function. As an application example, a four-way power divider is designed that operates over 2 to 8GHz frequency range. Experimental results are shown to approach the design performance, so transformer design by distributed network synthesis proves to be useful to power divider design.