• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1169-1176
• /
• 2010

The RF front-end for L1/L2 dual-band Global Positioning System(GPS) receiver is presented in this paper. The RF front-end(down-converter) using low IF architecture consists of a wideband low noise amplifier(LNA), a current mode logic(CML) frequency divider and a I/Q down-conversion mixer with a poly-phase filter for image rejection. The current bleeding technique is used in the LNA and mixer to obtain the high gain and solve the head-room problem. The common drain feedback is adopted for low noise amplifier to achieve the wideband input matching without inductors. The fabricated RF front-end using $0.18{\mu}m$ CMOS process shows a gain of 38 dB for L1 and 41 dB for L2 band. The measured IIP3 is -29 dBm in L1 band and -33 dBm in L2 band, The input return loss is less than -10 dB from 50 MHz to 3 GHz. The measured noise figure(NF) is 3.81 dB for L1 band and 3.71 dB for L2 band. The image rejection ratio is 36.5 dB. The chip size of RF front end is $1.2{\times}1.35mm^2$.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.279-288
• /
• 2014

Nuclear energy is expected to meet the growing energy demand while avoiding CO2 emission. However, the problem of accumulating spent fuel from current nuclear power plants which is mainly composed of uranium oxides should be addressed. One of the most practical solutions is to reduce the spent oxide fuel and recycle it. Next-generation fuel cycles demand innovative features such as a reduction of the environmental load, improved safety, efficient recycling of resources, and feasible economics. Pyroprocessing based on molten salt electrolysis is one of the key technologies for reducing the amount of spent nuclear fuel and destroying toxic waste products, such as the long-life fission products. The oxide reduction process based on the electrochemical reduction in a LiCl-$Li_2O$ electrolyte has been developed for the volume reduction of PWR (Pressurized Water Reactor) spent fuels and for providing metal feeds for the electrorefining process. To speed up the electrochemical reduction process, the influences of the feed form for the cathode and the type of anode shroud on the reduction rate were investigated.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.761-767
• /
• 2012

The polycarbonate (PC)-based optical diffusers for direct-lit LED backlight unit were prepared by using extrusion compounding followed by compression molding process. The application of inorganic porous silica particles as a diffusing agent in addition to conventional poly(methyl methacrylate) (PMMA) beads was attempted, and the optical, thermal, and mechanical properties of the prepared diffusers were investigated. The morphological observations revealed that the diffusing agents could be uniformly dispersed in the PC matrix without agglomeration by high shear stress generated during extrusion process. The incorporation of the porous silica particles mixed with PMMA beads remarkably enhanced the luminance uniformity with respect to both location and view angle for the diffuser, while minimizing the reduction in the absolute luminance, as compared with the diffuser containing only PMMA beads. In addition, thermal and mechanical properties of the diffusers were shown to be improved upon addition of the porous silica particles.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.44-44
• /
• 2001

최근들어 환경보호, 자원절약 및 산업의 경제성 확립을 위하여 전세계적으로 자원의 재활 용에 대한 일반 대중의 관심이 고조되고 있으며, 이와 때를 같이하여 각종 재활용 촉진을 위한 법규와 제도가 강화되어가고 있다. 이러한 분위기는 제지산업 분야의 경우 재생펄프 의 사용량 증가로 나타나고 있다. 그 동안 고지를 주된 원료로 사용하던 신문지, 판지 및 라이너지 등의 지종은 고지 사용 비율을 점차 높혀가고 있으며 천연펄프를 주된 원료로 이용하던 고급 인쇄용지와 화장지 분야에도 재생펄프의 사용이 시도되거나 확대되고 있 다. 아울러 전 지종에 걸쳐서 고수율 펄프의 활용 증대를 통한 산림자원 보호 및 경제성 확립에도 많은 노력이 경주되고 있다. 이러한 고지 및 고수율 펄프의 이용 증가 추세는 단 순한 경제적 이유에서 뿐만이 아니라 갈수록 강화되고 있는 환경보전과 자원절감을 달성 하기 위해서 지속되리라고 판단된다. 재생펄프의 이용과 함께 날로 엄격해지는 폐수 배출 규제와 관련하여 제지 공정을 폐쇄 화 방안이 적극 검토되고 있거나 실제로 적용되고 있다. 이에 따라 초지계의 백수 조건이 악화되고 있으며 앞으로 이러한 추세는 심화될 것이 자명하다. 이러한 백수계의 오염은 각종 첨가제의 기능 저하를 유발시키므로 공정 폐쇄화에 대처할 수 있는 새로운 기능성 보류시스템의 개발이 선행되지 않는다면 보류되지 못한 첨가제 혹은 미세분이 초지계를 오염시키는 악순환이 거듭될 것이 자명하다. 따라서 고지 재활용 및 공정 폐쇄화에 적극적으로 대처하기 위해서는 변화되는 원료 및 용수 조건에 능동적으로 대처할 수 있는 새로운 기능성 보류시스템으로서 전분과 마이크 로파티클로 구성된 보류 시스템을 검토하였다. 특히 마이크로파티클 시스템의 구성요소의 하나인 양성전분의 개질에 따른 효과를 평가하기 위해서 다양한 종류의 양성전분을 준비 하고 그 사용에 따른 미세분 보류도, reversibility 등을 측정하였다. 특히 reversibility를 측정함으로써 제지공정상에서의 전단력에 의한 응집에 파괴이후의 재응집 능력을 평가하 였다.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.191-196
• /
• 2008

This study was carried out to investigate the changes in carcass characteristics during slaughter process and to evaluate the physical properties of ostrich muscles. After blooding, pH of carcass was declined rapidly and showed 5.89 of final pH, whilst temperature was slightly decreased during slaughter process. Carcass of ostrich yielded 49.3%. For the comparison between muscles, m. gastrocneminus and m. iliofemoralis externus showed a significantly high pH (P<0.05). The muscle of which pH tended to be high in water holding capacity (WHC), however, m. gastrocneminus showed a significantly low WHC (P<0.05) due to low moisture content. M. obturatorius medialis showed the significantly lower shear force, whilst m. gastrocneminus was higher than other muscles (P<0.05). Therefore the results indicated that the production of high quality carcass was to reduce the time during slaughter process, and that high WHC and tenderness of ostrich meat had a potential application as a substitutional species to other animals.

• Clean Technology
• /
• v.8 no.2
• /
• pp.77-83
• /
• 2002

The purpose of this study is to develop the efficient nutrient removal process and to verify operation and design parameters in domestic sewage. Endogenous nitrate respiration (ENR) was used for denitrification of nitrate in return sludge without additional organic carbon source. ENR reactor before the anaerobic tank enable to reduce nitrate below 3 mg/L and increase phosphate release at anaerobic reaction. Primary effluent during pilot scale plant were shown as TCOD/TP ratio of 40~60 and TCOD/TKN ratio of 5~7. Effluent concentrations were 10 to 12mg/L as TN and 1mg/L as TP respectively. In lab scale experiments endogenous denitrification rate of ENR reactor ranges from 0.042 to $0.057gNO_3-N/gMv.d.$ $SP_{rel}/SCOD_{rm}$ was shown as from 0.13 to 0.17 in anaerobic reaction. These kinetic parameters are expected to be available for BNR(Biological Nutrient Removal) plant design and ENR reaction is available for nutrient removal in low strength wastewater.

• Journal of Welding and Joining
• /
• v.12 no.2
• /
• pp.11-19
• /
• 1994

레이저 가공기술은 재료가공 분야에서 넓은 응용분야를 가지고 있으며, 특히 절단, 용접, 열처리 등의 가공분야에서 고정밀도와 자동화의 용이성으로 인해 생산성이 높은, 고부가가치의 첨단응용 기술로 부각되고 있다. 특히 레이저절단은 타 절단법에 비교되는 절단정도, 열영향, 생산성, 작업 환경등의 각종 우위성으로 박판 및 후판절단분야에서 급속한 보급을 보이기 시작하였다. 현재 대 부분의 레이저 가공기는 CNC화 되어가고 있는 추세이며, 레이저 절단의 경우 생산성증대 및 고 정밀화를 위하여 CAD/CAM인터페이스에 의한 자동화가 필연적인 상황이다. 뿐만아니라 고출력 레이저 발전기를 가공 기본체에 탑재한 탑재형 레이저가공기의 출현으로 대형부재의 절단이 가능 하게 되었으며, 더불어 절단공정의 무인화를 지향하는 각종 시스템이 개발되고 있다. 이와 같은 무인화, 생산성증대, 작업시간단축과 러닝 코스트 및 재료의 절감을 위한 노력의 일환으로 컴 퓨터에 의한 자동 및 반자동 네스팅 시스템의 개발을 들 수 있다. 레이저에 의한 2차원 절단응 용분야에서의 네스팅작업은 설계가 끝난 각 부품의 절단작업의 전단계로서 수행되며, 일반적으로 네스팅공정이 완료되면 절단경로를 결정하고 가공조건과 함께 수치제어공작기계의 제어에 필요한 NC코드를 생성하게 된다. 최근에는 이와 같은 네스팅 시스템이 일부 생산현장에 적용되고 있 으나 이러한 시스템들의 대부분이 외국에서 개발된 것을 수입하여 사용하는 실정이다. 2차원 패턴의 최적자동배치문제는 비단 레이저 절단과 같은 열가공 분야에서 뿐만 아니라 블랭킹 금형, 의류, 유리, 목재등 여러분야에서 응용이 가능하며 패키지의 국산화가 시급한 실정이다. 네스 팅작업은 적용되는 분야에 따라 요구사항과 구속조건이 달라지며 이로 인해 알고리즘과 자료구 조도 달라지게 되나 공통적인 목표는 주어진 영역안에서 겹침없이 배치하면서 버림율을 최소화 하는 것이다. 지난 10여년간 여러 산업의 응용분야에서는 네스팅시스템의 도입이 활발하게 이 루어지고 있는데 수동에 반자동 및 자동에 이르기까지 다양하나 자동네스팅시스템의 경우 배치 효율의 신뢰성이 비교적 부족하기 때문에 아직까지는 생산현장에서 기피하는 실정이다. 배치알 고리즘의 관점에서 볼 때 이러한 문제들은 NP-complete문제로 분류하며 제한된 시간안에 최적의 해를 구하기가 가능한 조합 최적화 문제로 알려져 있다. 따라서 이 글에서는 레이저 절단분야 에서의 네스팅시스템에 관한 개요와 최근의 연구동향 그리고 몇 가지 전형적인 네스팅 알고리 즘들을 소개하고 비교분석을 통해 개선점을 간략하게 논의하고자 한다.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.382-387
• /
• 2013

Biodegradable polyurethane (PU)/clay nanocomposite films were prepared via extrusion compounding process followed by casting film process. Organically modified montmorillonite (denoted as C30B) with a large amount of hydroxyl groups on its surface was used for the formation of strong bonding with PU resin. From both XRD analysis and TEM observations, the intercalated and exfoliated structure, and dispersion state of silicate platelets in the compounded nanocomposite films were confirmed. In addition, the rheological and tensile properties, optical transparency, oxygen permeability of the prepared nanocomposites were investigated as a function of added nanoclay content, and moreover based on these results, the corelation between the morphology and the resulting properties of the nanocomposites could be presented. The inclusion of nanoclays at appropriate content resulted in remarkable improvement in the nanocomposite performance including tensile modulus, elongation, transparency, and oxygen barrier property, however at excess amount of nanoclays, reduction or very slight increase was observed due to poor dispersion. The biodegradability of the prepared nanocomposite film was evaluated by examining the deterioration in the barrier and tensile properties during degradation period under compost.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.574-579
• /
• 2011

3-Roll coating process as a key application technology for manufacturing automotive pre-painted metal-sheets has been studied. The 3-Roll coating system for this study consists of pick-up roll for picking up and distributing coating liquid from the reservoir, metering roll to properly meter coating liquid in metering gap regime, and applicator roll for directly transferring liquid into metal-sheet surface. Flow dynamics and operable coating windows of a polymeric paint (primer) with shear-thinning rheological property have been correlated with processing parameters such as speed ratio and metering gap between pick-up and metering rolls. In the uniform coating regime, dry coating thickness increased with increasing metering gap or decreasing speed ratio. Ribbing and cascade instabilities were observed in low speed and high speed ratio conditions, respectively. It is revealed that lower speed ratio makes severity and wavelength of the ribbing increase, aggravating flow instability in coating systems.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.23-28
• /
• 2016

In spite of various merit of algae as biofuel, the production cost of algae is a considerable obstacle for commercialization. The concurrent development of essential technologies is needed for the cultivating, harvesting, extracting and energy transformation. The production cost of algae biofuel has still higher than that of the other commercial biofuel. The major research activity has been focused on the cultivating and the research of other processes has been done with relatively lower activity. It is difficult to separate the algae from water because of the similar magnitude of density each other. The agglomeration and extracting of algae with the hybrid technology using ultrasonic wave is rare effect of environmental hazard and also it is appropriate technology for the next generation energy resources. The present research is investigated for the effective separation of algae from water with the ultrasonics wave. The aim of the present research is focused on the establishment of optimal design of algae agglomeration system. For this purpose, the computational fluid dynamic analysis has been conducted in the flow field with ultrasonic wave and algae flow to clarify the mechanism of algae separation by ultrasonic wave.