• Journal of Korea Game Society
• /
• v.12 no.5
• /
• pp.35-42
• /
• 2012

Main focus of FPS game's play is securing vantage points in space based on specific theme and removing enemies. It could be more directly interacted with players' game space than other genres. This paper analyzes design patterns on FPS game of nine types consisted of three themes : past war, modern war, near future war, which is based on 10 different patterns of near future theme-oriented by Hullett and Whitehead. As an outcome, an important function of 'element of cover' was found additionally as a main pattern besides the 10 different patterns. And by analyzing its attributes, it is suggested the efficient way to use the 'cover' pattern for level-design. This result can be utilized as an empirical guideline for level-design of FPS games by theme.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.15-18
• /
• 2000

Transparent conducting tin (IV) oxide thin films have been studied and developed for the electrode materials of solar cell substrate. Fabrication of tin oxide thin films by sol-gel method is process development of lower cost photovoltaic solar cell system. The research is focused on the establishment of process conditions and development of precursor. The precursor solution was made of tin isopropoxide dissolved in isopropyl alcohol. The hydrolysis rate was controlled by addition of triethanolamine. Dip and spin coating technique were applied to coat tin oxide on borosilicate glass. The resistivity of the thin film was lower than 0.01-cm and the transmittance is higher than $90\%$ in a visible range.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.791-796
• /
• 2017

In this study, we investigated the influence of the fabrication process of stacked capacitors on the cell capacitance by using Load Lock (L/L) LPCVD system for dielectric thin film of DRAM capacitor. As a result, it was confirmed that the capacitance difference of about 3-4 fF is obtained by reducing the effective thickness of the oxide film by about $6{\AA}$ compared to the conventional non-L/L device. In addition, Cs was found to be about 3-6 fF lower than the calculated value, even though the measurement range of the thickness of the nitride film as an insulating film was in a normal management range. This is because the node poly FI CD is managed at the upper limit of the spec, resulting in a decrease in cell surface area, which indicates a Cs reduction of about 2fF. Therefore, it is necessary to control the thickness of insulating film and CD management within 10% of the spec center value in order to secure stable Cs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4C
• /
• pp.127-136
• /
• 2011

The settlement of a compaction plate resting on the surface of rubble-mound and subjected to a vibrating vertical load can be characterized by a transient amplitude and a plastic settlement. As long as the maximum imposed load does not exceed the bearing capacity of the rubble-mound, plastic settlement will approach an ultimate value and essentially steady-state vibration will ensue. For the settlement behavior by vibro-compaction, most laboratory experiments were conducted on laterally confined samples with loads over the full surface area or on samples placed on a vibrating table. In the field, the loads cover only a small fraction of the surface area. In this study, crushed stones are loaded with the same as field condition. According to the vibro-compaction experiments on crushed stone, it was found that approximately 90% of total settlement occur within 2 minutes and plastic settlement increases with increasing cyclic stress levels including static and dynamic stress. A compaction equation on which the number of load cycles, amplitude of plate, settlement, width of plate, and cyclic stress are related each other is proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.521-526
• /
• 2020

Airfield pavements, such as runways and taxiways, are essential for smooth take-off and landing of fixed-wing aircraft and are the most important installation for the military to carry out air operations during wartime. Therefore, in wartime, it is necessary to reduce the damage to these installations and repair them in the shortest possible time. Recently, the pattern of attack is changing from the use of conventional high explosive which is to create large craters to the use of multiple warheads weapon system which is to effectively attack enemy's airfields but unrelated to accuracy. Hence in this study, through identifying the specification and composition of multiple warheads weapon system, we checked the protection performance and damage patterns of the pavement when explosion occurred on the installed military runway and taxiway by the multiple warheads weapon system. And The multiple warheads weapon systems is able to cause extensive damage but the destructive power of each warhead is not as great, so I would like to propose an airfield pavement design plan for minimal protection against such attacks.

• Applied Microscopy
• /
• v.40 no.1
• /
• pp.29-35
• /
• 2010

The present study was carried out to investigate the hepatoprotective effect of water extract of Lithospermum erythrorhizon on acute hepatotoxicity induced in Sprague-Dawley (SD) rats by a single dose of galactosamine (400 mg/kg, i.p). The animals were divided into four groups. The animals in the Con group were fed basal diet. GalN group were administered with galactosamine. LE200 and LE500 groups treated with water extract of Lithospermum erythrorhizon (such as 200 and 500 mg/kg/day, p.o) for 7 days before galactosamine injection. In the change of AST, ALT, ALP, GGT and LDH contents, as compared with GalN group, LE200 group were significantly decreased. According to the electron microscopical observation, liver cells were increased the lipid droplet, change of mitochondria in the GalN compared with LE200. These results suggest that administration of water extract of Lithospermum erythrorhizon suppress or retard galactosamine induced acute liver injury.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.21-28
• /
• 2011

In the existing digital map of the Ver.1.0, it is impossible to make a small scale digital map, which is under the 1/5000 scale map, by using the 1/1000 digital map which is the most large scale one. Because of this reason, the existing digital maps are produced into a 1/1000 and a 1/5000 map by means of two different scale aerial photos. The next generation digital map should be successively related to a small scale digital map based on the most large scale digital one. This is so important from the aspects of data share and the consecutive renewal. Ever since the development of the digital map of the Ver. 2.0, the possibility of making a multi-scale consecutive digital map has been presented and the related research has been done again. The most basic thing in the multi-scale digital maps is to decide the criteria of the generalization between the two scales. In this study, I try to formulate the criteria of the generalization required to make the 1/5000 digital map by using the 111000 digital one. In addition, I by to explore the application possibility of the consecutive renewal by carrying out auto-generalization.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.715-719
• /
• 2005

현재 우리나라는 1970년대 이후 급속한 경제성장으로 인하여 산업화 및 도시화 현상이 심화되고 있는 실정이며, 이러한 과정에서 불투수층의 증가로 인하여 첨두유출량의 증가, 자연유역에서 도시유역으로 변하면서 유역내 도달시간의 감소 등의 수문학적 특성이 변화로 예기치 못한 홍수로 인하여 피해가 발생하고 있다. 다라서 첨두유출량이 관망으로 전달되는 과정에서 관에 발생하는 부하의 증가로 인하여 내수침수 피해를 입게 되는데, 도시 유역에서의 인구 증가 및 산업활동에 따른 도시 개발로 인한 불투수면적의 증가로 우수유출량이 커지고 있으며, 저지대의 활용이 증대됨에 따라 내수 피해는 더욱 증가되고 있는 실정이다. 이러한 도시 유역의 재배 저감 대책 수립을 위해서는 먼저 실측자료와 도시유출 모형에서 산정된 첨두유출량과의 비교$\cdot$분석하여 최적의 모형을 채택하여야 한다. 또한 채택된 모형으로 적절한 설계 강우량이 선정되어야 하고, 그에 따른 유출량을 정확히 산정하여야 하나, 설계 강우량 산정을 위한 강우의 지속시간의 결정에 대해서 일반적인 기준이 확립되지 못하고 있는 실정이기에 재해 저감 대책 수립에 많은 어려움이 따르고 있다. 이에 본 연구에서는 실측 강우량, 첨두유출량 및 유출총량과 도시지역의 유출량 산정에 사용되어지는 ILLUDAS, SWMM 모형에 모의치와의 비교 연구를 통해 최적의 도시유출모형을 제시하고자 한다. 따라서 실측자료가 있는 서울시 장안$\cdot$뚝섬배수구역의 실측 강우와 펌프장에서 조사된 실측 유량과 ILLUD AS, SWMM 모형에 의해 산정된 유량과의 비교 분석 결과 SWMM 모형에 의한 첨두유량이 실측 첨두유출량과의 오차율에서 장안배수구역은 $21.1\%$, 뚝섬배수구역은 $4.3\%$로 가장 근접한 결과를 나타내었으며, 총 유출량에서도 각각 $7.8\%,\;13.2\%$의 오차율을 가지는 것으로 분석되어 타 모형에 비해 실유량과의 차가 가장 적은 것으로 모의되었다. 향후 도시유출을 모의하는 데 가장 근사한 유출량을 산정할 수 있는 근거가 될 것이며, 도시재해 저감대책을 수립하는데 기여할 수 있을 것이라 판단된다.

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2002

The occurrence rate of russet in 'Whangkeumbae' pear showed significant difference by years because the russet occurrence is greatly affected by the amount of rainfall. This study was conducted to analyse the relationship between rainfall and russet occurrence by artificial treatment of high humidity. Under high relative humidity condition, stomatal resistance decreased and average fruit weight was higher since the increased net photosynthesis rate accumulation accelerated fruit growth. The russet occurrence began on July 25, when the growth speed of fruit weight and fruit surface is the most fast. Russet occurrence rate was higher in high relative humidity condition because the fruit growth was accelerated. Since the fruit calcium concentration change is extreme in late July, it is assumed that the deceased calcium content is related to the occurrence of russet in 'Whangkeumbae' pear, When the high relative humidity condition is maintained after rainfall, the amount of net photosynthesis rate increase and fruit growth is accelerated. Therefore, the unbalance in the amounts of transferred photosynthesis assimilation product, water and mineral elements would be one of the reasons for the russet occurrence in 'Whangkeumbae' pear.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.765-772
• /
• 2011

In this paper, a simulation-based method is presented to dispose direction finders in three dimensional space for locating targets using the directional data. A direction finder(DF) is a military weapon that is used to find locations of targets that emit radio frequencies by operating two or more DFs simultaneously. If one or more DFs are operated in the air, the accuracy of location estimation can be enhanced by disposing them in a better configuration. By extending the line method, which is a well-known algorithm for 2-D location estimation, into 3-D space, the problem of 3-D location estimation is defined as an nonlinear programming form and solved analytically. Then the optimal disposition of DFs is considered with the presented method in which methods of simulation and search technique are combined. With the suggested algorithm for 3-D disposition of DFs, regions in which targets exist can be effectively covered so that the operation effect of DF be increased.