• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.141-142
• /
• 2015

본 논문에서는 동기 좌표계 비례 적분(PI) 전류 제어기의 이득 산정에 따른 계통 외란 발생 시 제어기의 응답 특성을 연구하였다. PI 전류 제어기의 이득 선정 시 플랜트의 시정수와 적분기 시정수를 같게 설정하는 극점-영점 상쇄 기법을 사용하여 전류 제어 특성을 결정할 수 있다. 그러나 극점-영점 상쇄 기법을 통해 이득이 선정된 전류 제어기는 계통에 외란 발생시 제어기 응답 특성이 느려진다. 적분기 시정수를 샘플링 주기를 이용하여 선정한다면 계통 외란에 강인한 특성을 갖게 된다. 제안된 방법은 각각 선정된 적분기 시정수를 가지고 외란에 대한 주파수 응답 특성과 데드 타임이 추가된 계통연계형 인버터 시뮬레이션 결과를 비교 분석하여 제안된 적분기 시정 수 선정 방법이 외란에 더 강인함을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.149-151
• /
• 2000

본 논문에서는 완전균형 상보형 적분기에서 그 이득과 단위이득 주파수 특성을 향상시킬 수 있는 high-swing cascode 구조를 이용한 새로운 적분기를 설계하였다. 설계된 high-swing cascode 적분기는 $0.25{\mu}m$ n-well CMOS 공정 파라미터를 이용하여 HSPICE 시뮬레이션 하였으면, 그 결과 제안된 회로는 2V 공급전압에서 전력소모는 1.04mW이고 차단주파수는 100MHz를 갖으며 이득은 51dB로서 이 적분기를 이용한 능동필터 설계시 요구조건인 40dB 이상의 이득 값을 만족한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.891-896
• /
• 2002

In this paper, a new voltage-controlled tunable integrator for low-voltage applications is proposed. The proposed active element is composed of the CMOS complementary cascode circuit which can extend transconductance of an element. Therefore, the unity gain frequency which is determined transcon-ductance is increased than that of the conventional element. And then these results are verified by the $0.25{\mu}m$ CMOS n-well parameter HSPICE simulation. As a result, the gain and the unity gain frequency are 42dB and 200MHz respectively in the element on 2V supply voltage. And power dissipation of the designed circuit is 0.32mW.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.177-180
• /
• 1998

높은 Q가 요구되는 고주파 신호 처리용 필터 설계에서는 흔히 SC 필터를 사용하고 있다. 처리하고자 하는 신호가 고주파수이고, 선택도 Q 값이 매우 높은 경우에는, SC 필터에 사용하는 증폭기의 성능이 빠르고, 직류 성분 이득이 커야만 한다. 이와 같은 속도와 이득이 요구됨에 따라 일반적인 범용 증폭기는 이득이 충분치 못하여 사용이 제한되고, 설사 범용 증폭기를 이용하여 필터를 구성하였다 해도 그 특성에 많은 제한을 줄 수밖에 없다. 또한 GaAS MESFET op amp의 경우, 최근의 논문에서도 60[dB] 이상의 이득이 제안된 바 없으므로, 필터 구성시 또 다른 설계 기술이 요구된다. 따라서 본 논문에서는 GaAS MESFET 능동 SC 적분기의 유한한 이득과 offset 전압을 보정한 새로운 구조의 적분기를 제안한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.69-77
• /
• 1993

Adaptive Control is applied to regulate cutting force in turning operation under varying cutting conditions. Regulation is achieved primarily by adjusting feedrate. Such control leads to better machine utilization and increased tool life. The modeling of adaptive control system in turning operation is presented. The experimental results show that the adaptive PI controller is stable and performs more effective force control over wide range of cutting conditions as compared with the fixed gain PI controller.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3614-3621
• /
• 2009

In this paper, A CMOS low-voltage current mode integrator is designed. The designed current-mode integrator is based on linear cascode circuit that is newly proposed in this paper. When it is compared with gain(43.7dB) and unity gain frequency(15.2MHz) of the typical current-mirror type current-mode integrator, the proposed linear cascode current-mode integrator achieves high current gain(47.8dB) and unity gain frequency(27.8MHz). And a 5th Chebyshev current-mode filter with 7.03MHz cutoff frequency is designed. The designed all circuits are simulated by HSPICE using 1.8V-$0.18{\mu}m$ CMOS technology.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1477-1483
• /
• 2013

This paper proposes a low-voltage current-mode integrator for a continuous-time current-mode baseband channel selection filter. The low-voltage current-mode linear cascode integrator is introduced to offer advantages of high current gain and improved unity-gain frequency. The proposed current-mode integrator has fully differential input and output structure consisting of CMOS complementary circuit. Additional cascode transistors which are operated in linear region are inserted for bias to achieve the low-voltage feature. Frequency range is also controllable by selecting proper bias voltage. From simulation results, it can be noticed that the implemented integrator achieves design specification such as low-voltage operation, current gain, and unity gain frequency.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.881-889
• /
• 2013

In this paper, a nonlinear and adaptive back-stepping control technique is proposed for a speed control of IPMSM(Interior Permanent Magnet Synchronous Motor). The gain of back-stepping controller(including integral value of the states error) is designed for stability of the system. In order to adapting fast in variation of load torque, the controller is including load torque estimator. The simulation is completed by using PSIM software. The simulation results show that the designed back-stepping controller make the system stable in the constant torque region, and has better tracking performance than a controller without the integral gain.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.30-38
• /
• 1998

In this paper, a new CMOS current-mode integrator is proposed that can apply the basic building block of the low-voltage high frequency current-mode active filter. And tuning circuits that control the gain and unity gain frequency of them is designed. The proposed integrator is composed of the CMOS complementary circuit which can extend transconductance of an integrator. Therefore, the unity gain frequency which is determined transconductance and MOSFET gate capacitance can be expanded by the proposed integrator. The unity gain frequency of the proposed integrator is increased about two times larger than that of the conventional continuous-time integrator with NMOS-gm. And also, cut-off frequency and gain of the active filter can be controlled with the designed tuning circuit. From the result, we can reduce errors on fabrication. And then, 3rd-order low-pass active filter is designed as an application circuits. These results are verified by the small signal analysis and the 0.8$\mu\textrm{m}$ parameter HSPICE simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.404-408
• /
• 2006

This paper presents an anti-windup gain selection method for a complex vector synchronous frame PI current controller. The complex vector PI current controller is more robust to the parameter variation than the state feedback decoupling PI current controller. The complex vector PI current controller also includes an integral term, which can results in windup problem when the controller is saturated due to physical limitation of the system. Furthermore, even an anti-windup is utilized, inappropriate gain can deteriorate the performance of the current controller. Therefore, appropriate anti-windup gain selection method for a complex vector current controller has been proposed based on the mathematical description of the current control system. The superior performance of the current control system with the proposed anti-windup gain has been verified by the experimental results.