• Journal of the Korean Magnetics Society
• /
• v.6 no.3
• /
• pp.179-188
• /
• 1996

This paper discussed on the impedance analysis of the planar air core inductors having spiral pattern and meander pattern. The width and distance of conductor, and number of turns were varied. As the width of conductor increased, both resistance and inductance decreased and there existed an maximum value in Q for spiral pattern. But Q increased with increasing width of conductor in meander pattern. In spiral pattern, there existed a distance between conductors where inductance became constant and Q became maximum, while the distance between conductors must be as large as possible to obtain large Q because the mutual inductance of meander pattern inductor has negative sign due to opposite current direction at adjacent conductor. Resistance and inductance increased with increasing the number of turns. There existed maximum Q at certain number of turns in spiral pattern. But Q became small in the meander pattern because increase of resistance was larger than increase of inductance with increasing number of turns.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.64-72
• /
• 1998

In this work, we have investigated the change of surface roughness, grain size and crystallinity of Poly-$Si_{1-x}Ge_x$ films deposited with the variation of deposition parameters (temperature, pressure, Ge composition ) and the effect of these results on the electrical resistivity. The crystallinity and the grain size were increased with increasing deposition temperature and Ge composition. Also, the electrical resistivity was decreased by enhanced grain size, while the surface roughness was increased. With increasing deposition pressure, the crystallinity was increased, but the grain size and the cluster size were decreased, by which the surface roughness was decreased. And the electrical resistivity was increased. Based on the effect of the crystallinity and the grain size on the electrical resistivity, it was founded that the electrical resistivity was depend on the grain size rather than the crystallinity.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.149-154
• /
• 1998

The characteristics of drag reduction and rheological behaviors were investigated using cationic surfactants, whose microstructures are known to change when concentration of the surfactant exceeds CMC. The firstly formed spherical micelles change to rodlike or disklike micelles because of packing between surfactants micells, and of thermodynamic perference. The drag reduction becomes significant when the concentration increases over this micellar transient point. Drag reductions were measured as a function of concentration, and rheological characteristics of the surfactant were further investigated to understand the correlation between their rheological properties and drag reduction. Micelles show the non-Newtonian behavior, and shear thickening behaviors were observed due to the structural development. In addition, structural developments were determined by adding the counter-ion in case of DOBON-G.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1908-1914
• /
• 1992

A significant drag reduction in the turbulent flow of CWM(coal Water Mixture) adding minute amounts of high molecular weight polymer additives has been obtained and it was compared with pure CWM.However, the rate of drag reduction could come down with flow time, which is caused by polymer degradation, The rate of drag reduction and polymer degradation is affected by polymer type, concentration, molecular weight, and flow velocity. In the present investigation, these important parameters were evaluated for their influences on polymer degradation in order to find out stable conditions for CWM transportation with time. It was necessary to determine the more effective type of polymer additives to guarantee the optimum conditions for CWM transport. Experiments were undertaken with a test section of pipe diameter 9.8mm and pipe length 3500mm(L/D=357) in a closed loop, and polyacrylamide and polyetylene oxide were utilized as polymer additives. The tests were carried out under the conditions of 200, 400, 700ppm of polymer concentrations. CWM concentrations utilized were 5% and 10% with flow velocities of 4.9m/s and 6.1m/s. Experimental data show that polyehylene oxide degraded faster than polyacrylamide in CWM transport, and polyacryamide is considered to be a more effective candidate as additive for long time-CWM transport. Polymer degradation is also found to be more likely at lower polymer concentrations, at higher flow velocities, and higher CWM concentrations.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.11-16
• /
• 2017

The frequency dependent input resistance observed in RF MOSFETs is analyzed in detail by deriving pole and zero frequency equations from a simplified input equivalent circuit. Using this theoretical analysis, we find that the reduction effect of the input resistance in the low frequency region arises from the channel resistance between source and pinch-off region in the saturation region. This channel resistance effect on the low frequency reduction of the input resistance is physically validated by performing small-signal equivalent circuit modeling with varying the channel resistance.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.5-8
• /
• 1980

스트레인 게이지를 사용하여 회전체의 스트레인을 측정할 경우, 회전체 내에 브리지를 구성하여 브리지의 4점의 입출력단을 슬립 링을 매개로 정지 쪽으로 끌어내어 측정하는 것이 일반적으로 상용되고 있는 방법이다. 이 방법에 의하면 1측정점에 대하여 4소자의 슬립 링을 필요로 하기 때문에 다수점의 스트레인 측정은 곤란하다. 그래서 브리지를 셰브론 브리지식으로 구성하면 슬립링수를 대폭 줄일 수 있다. 그러나 이 방법은 다음의 이유로 인하여 측정 정밀도가 저하하는 결점이 있다. (1) 종래의 동응력 측정기는 입력 임피이던스가 작기 때문에 각 채널간에서 간섭을 일으킨다. (2) 채널간의 간섭은 공통브리지 저항값의 크기에 따라서도 영향을 받는다. 이 저항값이 작을수록 간섭량은 감소되기 때문에 이것을 작게 하면 브리지의 합성저항이 작아 지고, 브리지전원공급용 슬립 링의 접촉저항의 영향이 커진다. 그래서 셰브론 브리지식으로 슬립 링을 감소시키는 동시에 위에 말한 결점을 없앤 새로운 다점응력 측정기를 개발했다. 이 스트 레인측정기는 종래의 동스트레인 측정기와 다른 중요한 점은 다음의 두가지이다. (1) 증폭기의 입력임피이던스(impedance)를 크게 (약 50k.ohm.)하는 동시에 공통브리지의 저항을 작게 (약 10.ohm.)하고, 각 채널간의 간섭을 없앴다. (2) 브리지전원공급용 슬립 링의 접촉저항에는 관계없이 브리지에는 항상 일정한 전압이 공급 되게 했다. 본 보고에서는 (1)에 대한 검토는 생략하고, 주로 (2)에 대하여 기술한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.32.1-32.1
• /
• 2009

현재 ITO를 대체할 재료로 투명 전도성 탄소나노튜브(carbon nanotube, CNT) 필름에 대한 연구가 진행 되고 있다. 이러한 연구에서 특히 CNT 필름의 투과도에 따른 전기저항을 향상시키기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 단일벽 CNT (single-walled CNT)를 여러 가지 계면활성제로 최적 분산시킨 수용액으로부터 제조한 CNT 필름의 투과도에 따른 면 저항 (sheet resistance) 변화를 관찰하였다. 우선 계면활성제로 분산시킨 CNT 수용액을 알루미나 재질의 필터에서 정량적으로 진공 필터링하여 CNT 필름을 제조하였다. 알루미나 필터를 sodium hydroxide (NaOH) 수용액으로 용해시켜 제거함으로써 얻은 CNT 필름을 유리기판 위에 부착시켰다. 필름의 전기저항을 낮추기 위해 유리기판 위에 부착된 CNT 필름을 질산 (HNO3) 용액으로 처리하였다. Scanning electron microscopy, UV-Vis spectroscopy를 이용하여 각각 필름의 형상과 광 투과도를 분석하였고, 4-point probe로 면 저항을 측정하였다. 계면활성제로 분산시킨 CNT 필름 대부분의 면 저항은 질산 처리에 의해 감소하였다. 이는 CNT 표면에 코팅되어 있던 계면활성제가 질산에 의해 제거되었기 때문인 것으로 예상된다. 여러 계면활성제 중 sodium dodecyl benzenesulfonate로 분산시킨 CNT 필름이 산 처리 후에 가장 낮은 면 저항을 보였다. 그리고 Polyvinyl pyrrolidone (PVP)과 cetyltrimethylammonium bromide (CTAB)를 사용하여 제조한 CNT 필름의 면 저항이 가장 뚜렷한 감소를 보였다.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.315-324
• /
• 1990

저저항(DuPont 1721, 100.OMEGA./sq.)과 고저항(1741, 10K.OMEGA./sq.)의 두 Ru계 후막저항체를 여러 조건에서 소결하여 소결막의 복소임피던스 특성과 임피던스의 주파수의존성을 1KHz-13MHz의 주파수 범위에서 조사하였다. 저저항 1721계의 경우 600.deg.C이상에서 소결한 모든 시편이 거의 저항성분(R)만으로 구성된 등가회로에 해당되는 복소임피던스 거동을 보였으며 임피던스에 미치는 주파수 의존성은 크게 나타나지 않았는데 5KHz까지는 주파수에 따라 변화가 없다가 그 이상의 주파수에서 주파수 증가에 따라 약간씩 증가하였다. 고저항 1741 후막저항체의 경우는 소결조건에 따라 복소임피던스 거동과 임피던스에 미치는 주파수 의존성이 달리 나타났다. 600.deg.C에서는 용량(C) 성분만으로 구성된 등가회로에 해당하는 복소임피던스 거동을 얻었고 주파수 증가에 따라 임피던스가 직선적으로 감소하였으며 700.deg.C이상 900.deg.C까지는 저항(R)과 용량(C)이 병렬로 연결되는 형태의 등가회로에 해당하는 복소임피던스 거동을 얻었고 이때의 임피던스의 주파수 의존성은 저주파수 영역에서는 임피던스가 주파수에 변함없이 일정하다가 5KHz이상의 주파수에서는 주파수 증가에 따라 임피던스가 직선적으로 감소하였다. 1000.deg.C반응에서의 복소임피던스 거동은 RCL성분이 병렬로 연결된 형태의 등가회로에 해당되는 결과를 얻었으며 임피던스도 작아지고 주차수 의존성도 현저하지 않았다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.1
• /
• pp.14-22
• /
• 1989

Rice varieties showing different degree of resistance were compared with their yield losses due to the damage of sheath blight disease in field condition through 1985 to 1986. Gayabyeo showed the lowest value of disease severity among 5 varieties tested in 1985 and 8 in 1986. and Taebaekbyeo, Kwanakbyeo and Labelle showed higher value of disease severity under the condition of artificial or natural disease inoculation. Grain yield of Gayabyeo, a moderate resistant rice variety, was reduced by 0.3 to 5％ in the rate due to sheath blight disease damage and Taebaekbyeo. a susceptible variety. showed the highest in the rate of yield loss, 6.8 to 25.8 ％. The matured grain rate and 1000-grain weight of the matured tiller were decreased when the developing disease lesion reached to the flag leaf, and then panicle weight was decreased more than 25 ％ compared with panicle of healthy culm. In conclusion, Gayabyeo showed the lower rate of yield loss because of slow development of disease to the upper leaves after initial disease occurence on the lower parts of rice plants.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.322-327
• /
• 2003

Giant magnetoresistance(GMR) NiO multilayer, which has been used to reading head of highly dense magnetic recording, was fabricated, and oxidized in an air during 80 days to study the dependence of magnetoresistance properties on residual stress in the interfaces. The magnetoresistance ratio and the exchange biasing $field(H_{ex})$ of $NiO(60nm)/Ni_{81}Fe_{19}(5nm)/Co(0.7nm)/Cu(2nm)/Co(0.7nm)/Ni_{81}Fe_{19}(7nm)$ spin valves were increased from 4.9% to 7.3%, and 110 Oe to 170 Oe after natural oxidation in the atmosphere for 80 days, respectively. The sheet resistivity ${\rho}$ decreased from $28{\mu}{\Omega}m$ to $17{\mu}{\Omega}m$, but ${\Delta}p$ did not almost change after the oxidation. Therefore, the increase of MR ratio is due to the decrease in the sheet resistivity. the reduced resistance may result from the increase in the reflection of conduction electrons at the oxidized top surface. Also, the increase in the exchange biasing field is originated from the reduction of residual stress at the interface of $NiO/Ni_{81}Fe_{19}$ according as the aging time increases.