• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.812-820
• /
• 2002

The positive temperature coefficient (PTC) characteristics of polymer composites were investigated with the nano-sized carbon black particles using solution tasting and melt compounding methods. The polymeric PTC composites should the electrical threshold at 35 wt% for the melt compounding method and 40 wt% for the solution casting method. The ethylene vinylacetate copolymer (EVA) composite showed a gradual increase of resistance as a function of temperature and showed a maximum at the polymer molting point. The resistance of the high-density polythylene (HDPE) composite remains unchanged with temperature but started to Increase sharply near the melting point of HDPE and showed a maximum resistance at the melting point of HDPE. The dispersion of nano-sized carbon black particles was investigated by scanning electron microscopy (SEM) and low resistance after electrical threshold, and both methods exhibited a well dispersed morphology. When the electric current was applied to the PTC composites, the resistance started increasing at the curie temperature and further increased until the trip temperature was roached. Then the resistance remained stable over the trip temperature. The secondary increase started at T$\sub$m/ of matrix polymer and kept increasing up to the trip temperature.

• Composites Research
• /
• v.28 no.6
• /
• pp.348-355
• /
• 2015

NDT (Non Destructive Test) of the adhesive joints is very important because their strengths have greatly affected by the worker's skill and environmental condition. Recently, the electric impedance method in which 1-2 wt% CNT was dispersed in the adhesive and the electric resistance of the adhesive joint was measured was suggested for the defect detection of the adhesive joint. The uniform dispersion of CNT in the electric impedance method is very important to make a constant electric resistance of the adhesive joint and the accuracy of defect detection depends on the uniform dispersion. In this paper, the adhesive joints in which CNT was dispersed in the adhesive by the four dispersion methods were made and their electric resistance were measured. The pre-process and evaporation process of CNT using the ultrasonic method and agitation method was used and the effective dispersion method was suggested. Also, the criteria to evaluate the dispersivity was proposed.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.676-680
• /
• 2008

TiN thin films were deposited on a $SiO_2(2000{\AA})/Si$ substrate by radio-frequency(rf) magnetron sputtering. TiN films were prepared under varying $N_2$ concentration in $N_2/Ar$ gas mix, rf power and gas pressure, and investigated in terms of deposition rate, resistivity and surface morphology. As $N_2$ concentration increased, the deposition rate and the surface roughness of the films decreased and the resistivity increased. With increasing rf power, the deposition rate increased but the resistivity was decreased. As gas pressure increased, little change in deposition rate was obtained but the resistivity rapidly increased. TiN film with resistivity of $2.46{\times}10^{-4}{\Omega}cm$ at 1 mTorr was formed. It was observed that there existed a correlation between the deposition rate and resistivity. In particular, the gas pressure has a strong influence on the resistivity of thin films.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.638-642
• /
• 2014

In this study, we investigate on the crystal microstructure and magneto-resistance (MR) change of Bismuth(Bi) thin films for annealing process, in order to apply Bi thin films to the spin electronic devices. As-prepared Bi thin films show the randomly oriented find grains whose size was measured to about 100 nm and the very low MR (4.7 % at room temperature) while careful annealing results in not only grain growth up to ${\sim}2{\mu}m$ but also drastic MR improvement (404 % at room temperature). The drastic change in the MR after applying the annealing process is attributed to the grain growth decreasing grain boundary scattering of electron. Therefore, in this study, we confirm the annealing effect for the grain boundary formation and MR improvement of Bi thin films, and demonstrate the feasibility of spin electronic devices.

• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.418-425
• /
• 1999

The characteristics and yield of resistnat starch (RS) in waxy starches which were treated with 0.1N HCl were investigated. Hydrolysis rate of waxy starches were 0.32-0.88%. The yields of RS in waxy maize and waxy barley starches increased with acid treatment time up to 12hr and then decreased. The yield of RS in waxy rice starches increased with acid treatment up to 8hr and then decreased. The hydrolysis and yield of RS were different depending upon the varieties of starch source. Autoclaved normal maize starch showed a gel-like structure, but autoclaved normal maize starch showed crystal particle on the surface by SEM. The shape of autoclaved resistant starch was not different from acid treated ones. X-ray diffraction patterns of native and acid treated starches were all A-types. X-ray diffraction patterns of autoclaved waxy maize starches showed amorphous structures, however, those of RS showed all completely crystalline structure.

• Information Systems Review
• /
• v.11 no.3
• /
• pp.125-146
• /
• 2009

The emergence of open source software(OSS) with its most prominent advantages creates a vast interest among practitioners. A study on Linux, the most well-known OSS, estimated that it would cost as 5.4 billion Euros taking over 73,000 person-years if it had been developed by conventional means. However, Linux has achieved only 0.65 percent of the operating system market for individual users while Microsoft windows family counts for nearly 90 percent of the market. Much of the effort being spent in the development of OSS is going to waste and potential value that OSS can bring to users is not being realized. Adoption of OSS is often accompanied by the discontinuance of existing software that is already in place. If users resist changing, they may not adopt OSS. Using the case of Linux, this study examines user resistance to change from the commercial operating software to the free operating system. This study identifies six sub-types of switching costs (uncertainty, emotional, setup, learning, lost benefit, and sunk costs) and tests their effects on user resistance to change based on a survey of 201 users. The results show that user resistance to change has a negative impact on the adoption of OSS. Further, this study shows that uncertainty and emotional costs have significant effects on user resistance to change. Beyond previous research on technology adoption, this research contributes towards an understanding of the switching costs leading to user resistance to change and offers suggestions to OSS practitioners for developing strategies to improve the adoption of OSS.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.1
• /
• pp.59-62
• /
• 2004

To know what happens to the internal structure of emulsions under high shear flow is very important for cosmetic product development because it is highly relevant to the physical degradation of emulsions during the application upon the skin. Here, in order to investigate the response of emulsions against the external shear forces, we designed a new device, .JELLI$^{TM}$ (Joint Electro-rheometer for Liquid-Liquid Inversion) chip, for the measurement of electrical and rheological properties of emulsions under shear flow. By using this device, we examined the real-time changes in conductivities of oil-in-water (O/W) and water-in-oil (W/O) emulsions on the artificial skin during large deformation under shear flow. In this study, O/W and W/O emulsions having various volumes were prepared. After emulsions were homogeneously applied on the artificial skin, the electrical resistance and viscosity changes were monitored under steady shear flow. In case of O/W emulsions, the resistance increased as a function of time. The resistance showed more dramatic increase as the increase of the internal oil phase. It was also found that the viscosity change was proportional to the resistance variation. This phenomenon might be caused by decreased resisting forces against the shear flow because of the breakdown of the internal phase.the internal phase.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.147-151
• /
• 2004

This study aims at measuring electrical and rheological properties of cosmetic emulsions on the skin under shear flow. The effects of volume ratio and surfactants on structural changes of emulsions were examined by determining the changes of electrical resistance, viscosity, and morphology. As the ratio of the internal phase increased, the phase inversion occurred more quickly. The viscosity change was found to increase with increasing of the variation of electrical resistance of the emulsions. This phenomenon may be caused by decreased resistant force against the shear flow because of the breakdown of the internal phase. Surfactants a]so played a key ro]e on phase transition of emulsions. It is likely that polymeric surfactants anchoring on the emulsion surface reinforced the interfacial mechanical strength. As the concentration of surfactants increased, the phase transition occurred more slowly. It has been demonstrated that the phase changes of emulsions under shear flow can be monitored on the real-time basis by using a JELLI$\^$TM/ chip system, a combination of conductiometry and rheometry. Our approach is expected to a useful experimental tool for predicting the phase transition of the cosmetic products during skin application.

• Information Systems Review
• /
• v.10 no.3
• /
• pp.257-287
• /
• 2008

Grounded in the prior literatures on acceptance and diffusion of IT and innovation in the level of organization research, 3 major constructional factors such as Motivation, IT resistance, and IT change management were investigated to suggest propositions from 15 multi-cases of PLM from 6 different companies in Automotive OEMs and suppliers, and we posited that the diffusion is continued only when motivation is stronger enough to overcome IT resistance as a fundamental finding and basis of this research on PLM acceptance and diffusion. The Motivation was found to be initiated and categorized from three different factors such as environmental factors, organizational factors, and technological factors, providing key propositions for further research: (1)The Automotive suppliers, contrary to OEM, are affected more by the demand of inter-connectivity as an environmental factor, while the other factors are similarly influencing to them, (2)The big organizations are influenced more by the champion, while the small organizations get influenced more by leader. (3)When the trend, inter-connectivity and complexity get stronger, the motivation gets more strongly influenced by the perceived benefit in the technological context. Regarding Change management we suggests IT change management is supportive to overcome IT resistance and also to enforce Motivation, and the critical mass exists differently according to the market maturity adopted, and more market matured technology has lower critical mass, implies less requirement of IT change management than less market matured technology.

• Composites Research
• /
• v.33 no.4
• /
• pp.228-233
• /
• 2020

In this paper, a single lap shear test was performed using a glass fiber reinforced composite material (GFRC). Pencil lead drawn paper sensor (PLDPS) was applied for single lap shear test being performed. Bisphenol-A epoxy and amine hardener were used as adhesives combining with composite materials. To make a difference in adhesive properties, the adhesive was cured under different conditions. PLDPS was made of a 4B pencil on A4 paper. Because graphite in a pencil was an electrically conductive substance, electric resistance (ER) could be measured. A change in ER was observed by a position where a PLDPS was attached to single lap shear specimens. It was confirmed that the change in ER was different depending on two attached positions and was observed by lap shear strain as well. In case the lap shear strain was large, the change in ER of PLDPS was high. This was because the larger the extension of the adhesive part, the larger the degree of bending of the specimen and thus the larger the distance change between two electrodes.