• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.94-99
• /
• 1997

There are several factors that have influence on the phase noise of an oscillator. But one of the major factors is the flicker noise of a transistor, since the phase noise of an oscillator is generated by mixing the carrier with the low frequency noise near the DC having the characteristic of 1/f. In this paper, we have presented a method on reducing the phase noise of an oscillator by using a low-frequency feedback circuit based on an active bias circuit, and have fabricated a DRO for a DBS receiver. Measurement results show that the phase noise is -92 dBc/Hz at the 10 KHz offset frequency, and from these results we have found out that the reduction method is very effective.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.108-118
• /
• 2001

In this paper, the conventional deblocing algorithms are compared in each region of the image. Based on the comparison result, we propose a new deblocklng algorithm that can improve subjectives as well as the objective quality. Because the human visual system is mode sensitive to the blocking artifacts in the low frequency re91on, we compare the performance of several deblocking algorithms in 7he low and high frequency region separately. For this purpose we also propose an algorithm for classifying the region into low and high frequency ones. and propose a deblocking algorithm which is applied differently to each region. The result shows that the adaptive LPF method yields the best performance in the low frequency region in terms of both subjective and objective quality. Hence. by applying the adaptive LPF method to the low frequency region, the performance of conventional algorithms can be improved. In the high frequency region. it is observed that the DCT-based POCS algorithm provides the best performance. Hence, by combining the algorithm with the adaptive LPF method, the best objective performance is obtained.

• The tire
• /
• s.80
• /
• pp.41-45
• /
• 1979

편집자주 : 일반적으로 공해중에서도 가장 심한 것이 소음과 진동문제로 생각된다. 고무공업에 있어서의 소음과 진동은 지산업에 비해 다소 적다고 한다. 용도지역별로 보면 지산업과 마찬가지고 거주지역과 준공업지역에서 압도적으로 많다고 한다. 한편 최근에는 저주파진동(공기진동)까지도 주의할 필요가 있다고 한다. 본고는 일본 석천도방음공업(주)의 연구논문에거 발췌한 것으로, 특히 고무공장의 공해문제대책에 많은 도움이 되었으면 합니다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.85-90
• /
• 2013

Core muscle is the most crucial for rehabilitation of patients with musculoskeletal and nervous problem, there is pain, imbalance and functional movement disorder of upper and lower extremities. In this study, low-frequency electrical stimulator was developed for the purpose increasing the activity of rectus abdominis (RA) and the thickness of transverse abdominis (TrA), internal obliquus abdominis (IO), and external obliquus abdominis (EO). Fifteen female in their 20's was divided into a experiment groups (traditional electrical stimulation group, developed electrical stimulation group) and control group. Low-frequency electrical stimulation was performed in experimental groups for 4 times a week, 4 weeks. The muscle activities (RA) by EMG and muscle thickness (TrA, IO, EO) by Ultrasonogrphy imaging were measured, respectively. In the result, the muscle activity of RA and muscle thickness of TrA and EO were significantly increased at developed electrical stimulation group (p<.05). Therefore, the developed low-frequency electrical stimulation is useful for rehabilitation with CNS and PNS subjects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.267-272
• /
• 2007

This paper proposes a new approach fur the detection of facial feature regions using the characteristic of DCT(discrete cosine transformation) thatconcentrates the energy of an image into lower frequency coefficients. Since the facial features are pertained to relatively high frequency in a face image, the inverse DCT after removing the DCT's coefficients corresponding to the lower frequencies generates the image where the facial feature regions are emphasized. Thus the facial regions can be easily segmented from the inversed image using any differential operator. In the segmented region, facial features can be found using face template. The proposed algorithm has been tested with the image MIT's CBCL DB and the Yale facedatabase B. The experimental results have shown superior performance under the variations of image size and lighting condition.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.154-159
• /
• 2010

In this paper, the magnetically shielded room for low magnetic field shielding is designed and measured by fabricated. The size of magnetically shielded room was 3.0[m](W)$\times$3.0[m](L)$\times$3.0[m](H) to enter the industrial measuring instruments and analyzed DC and AC shielding characteristics of magnetic materials with a high permeability and AC shielding characteristics by eddy current of conductive materials. As a results, shielded room dimensions were obtained. To verify the analysis results, magnetically shielded room is fabricated and the calculated results are compared with the measured results. The Measured results show good agreement with calculated results. According to measurements, 5 times of 0.1[Hz] and 86 times of 60[Hz] is achieved at low frequency. The fabricated shielding room can be used as the magnetically shielding room for low magnetic field shielding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.668-674
• /
• 2009

In this paper, we design and implement a high speed power-line communication modem, supported up to the transmission rate of 480kbps in a lower frequency band of under 450kHz. The power-line channel model is discussed in the sense of the lower frequency band, and the transmission technique of OFDM(Orthogonal Frequency Division Multiplexing) is considered to improve the throughput effectively. According to the power-line channel variation, the designed modem can select the modulation mapping between a 16-QAM(Quadrature Amplitude Modulation) or a QPSK(Quadrature Phase Shift Keying). Thus, it makes a sufficient QoS even in a poor channel environments. With a implementation result, we show that it gives a variable transmission rate of 480kbps or 240kbps in the signal bandwidth of $50kHz{\sim}450kHz$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.45-51
• /
• 2006

In this paper, a new predistortion linearizer for controlling the amplitude of low frequency intermodulation distortion signals is proposed. The low frequency intermodulation distortion(IMD) components are generated by harmonic generator. A vector modulator, modulate fundamental signal with low frequency IMD signals, generates predistortion IMD signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed IMD signals of power amplifier effectively. The predistortion linearizer has been manufactured to operate in cellular base-station transmitting band($869{\sim}894\;MHz$). The experimental results show that IMD3 of power amplifier are improved more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 10 dB for IS-95 CDMA IFA signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1108-1119
• /
• 2016

This paper presents the spectral analysis and radiation pattern of low-frequency electromagnetic(EM) leakage signals according to the fundamental operations of smartphones. The EM leakage signals generated by the activation of four I/O sensor modules such as a touch-screen, a camera, a microphone and a speaker are captured by the commercial near-field magnetic probe with 1cm spatial resolution. The analysis results show that the leakage of the EM wave occurs strongly around the activated I/O sensor modules, AP(Application Processor) and memory modules. Also, the distinguishable frequency characteristic is shown in each spectrum of EM leakage signals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7B
• /
• pp.1282-1291
• /
• 2000

기존의 LQ-서보형 PI 설계방법은 보드선도 상에서 저주파와 고주파 영역에서의 루프전단함수의 특이값 일치에 기이한 설계상의 문제를 가지고 있다. 이러한 점을 해결하기 위해 역 최적제어와 볼록형 최적화기법에 기초한 새로운 설계 방법을 제안하고자 한다.