• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.635-641
• /
• 2016

In order to drive a hybrid propulsion device which combines an engine and an electric propulsion unit, battery packs that contain dozens of unit cells consisting of a lithium-based battery are used to maintain the power source. Therefore, it is necessary to more strictly manage a number of battery cells at any given time. In order to manage battery cells, generally voltage, current, and temperature data under load condition are monitored from a personal computer. Other important elements required to analyze the condition of the battery are the internal resistances that are used to judge its state-of-health (SOH) and the open-circuit voltage (OCV) that is used to check the battery charging state. However, in principle, the internal resistances cannot be measured during operation because the parallel equivalent circuit is composed of internal loss resistances and capacitance. In most energy storage systems, battery management system (BMS) operations are carried out by using data such as voltage, current, and temperature. However, during operation, in the case of unexpected battery cell failure, the output voltage of the power supply can be changed and propulsion of the hybrid vehicle and vessel can be difficult. This paper covers the implementation of a high safety battery management system (HSBMS) that can estimate the OCV while the device is being driven. If a battery cell fails unexpectedly, a DC power supply with lithium iron phosphate can keep providing the load with a constant output voltage using the remainder of the batteries, and it is also possible to estimate the internal resistance.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.165-172
• /
• 2020

In this paper we propose an uses on-device-based edge computing technology and big data analysis methods through the use of on-device-based edge computing technology and analysis of big data, which are distributed computing paradigms that introduce computations and storage devices where necessary to solve problems such as transmission delays that occur when data is transmitted to central centers and processed in current general smart factories. However, even if edge computing-based technology is applied in practice, the increase in devices on the network edge will result in large amounts of data being transferred to the data center, resulting in the network band reaching its limits, which, despite the improvement of network technology, does not guarantee acceptable transfer speeds and response times, which are critical requirements for many applications. It provides the basis for developing into an AI-based facility prediction conservation analysis tool that can apply deep learning suitable for big data in the future by supporting intelligent facility management that can support productivity growth through research that can be applied to the field of facility preservation and smart factory industry with integrated hardware technology that can accommodate these requirements and factory management and control technology.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.48-48
• /
• 2019

Amorphophallus paeoniifolius (Dennst.) Nicolson는 영명으로 Elephant yam 또는 Whitespot giant arum 으로 불리는 천남성과(Araceae) 식물로 동아시아, 뉴기니, 오세아니아, 마다가스카르 등지에서 자생하고 있으며 숲의 가장자리 또는 2차림에서 발견 된다. 다년생 식물로 덩이줄기는 어두운 갈색의 둥근모양으로 직경 20~25 cm로 자라고 수염뿌리가 사방으로 달린다. IUCN 적색목록(Red List)에 관심대상 종(LC: Least Concern)에 속하는 식물이다. 현지인들은 마(Dioscorea Polystachya Turcz.)처럼 채소로 먹기도 하며 약용으로 쓰이기도 하는데 복부장애, 소화불량, 천식, 기관지염, 빈혈 등에 약효가 있다. Amorphophallus paeoniifolius은 $25^{\circ}C{\sim}35^{\circ}C$, 연강수량 1,000~1,500 mm에서 잘 자란다. 가운데 눈이 올라오면서 생장을 시작하고 며칠이 지나서야 잎 또는 꽃으로 자라는지 알 수 있다. 잎의 생육주기는 잎눈이 생장을 시작하면 잎자루 끝에 소엽과 소잎자루가 접힌 채로 올라온다. 소엽들이 펴지면서 완전한 모습을 갖추는데 30일 이상의 생장기간을 갖는다. 잎의 형태는 우상복엽(pinnate compound leaf)으로 우산처럼 보이는 잎 하나로 광합성을 한다. 잎은 최대 높이 2.5~3 m, 너비 3 m까지 자라며, 잎자루의 색은 녹색과 청색으로 얼룩덜룩한 무늬가 있다. 인공환경 조건에서 Amorphophallus paeoniifolius 생활사 중 잎의 주기를 연구하기 위해서 광, 온도 등의 지상부 환경은 열대 및 아열대 식물의 자생지와 유사하게 조성하였고, 지하부 환경은 인공 배합토를 사용하여 조성하였다. 평균온도는 $25{\sim}28^{\circ}C$, 겨울철 최저 $16^{\circ}C$, 여름철 최고 $33^{\circ}C$를 유지 관리 하였다. 자동 환경제어시스템으로 온도 및 환기를 유지 관리하고 필요에 따라 수동제어 관리를 병행하여 조절하였다. Amorphophallus paeoniifolius는 잎을 먼저 생성하고 광합성으로 생산된 영양물질을 덩이뿌리에 저장을 하고 그 영양물질을 이용하여 꽃을 피우는 생육 특성을 지닌다. 실험에 사용된 공시 식물은 2018년 12월 미얀마에서 생체(덩이줄기) 형태로 도입되었다. 화분에 식재 후 약 5개월이 지난 시점에서 잎의 생장이 시작되었다. 2019년 7월 29일 기준으로 높이 80 cm, 너비 60 cm의 크기로 성장하였으며, 생육환경에 따라 3~5개월 뒤 잎이 지고 나면 다시 덩이줄기로 되돌아갈 것으로 판단된다. 하지만 지금까지 이 식물에 알려진 정보는 인공환경에서의 연구가 아닌 자연환경에서의 연구결과이기 때문에 인공적인 온실 환경에서 자란 Amorphophallus paeoniifolius는 잎의 주기는 더 오래 갈 수도 있으며 꽃의 주기 또한 느리거나 빠를 수 있다. 잎의 생장주기(Leaf Cycle)시 잎자루가 낮과 밤의 방향을 달리 하여 자라는 것이 관찰되었다. 이는 광합성을 위해서 잎자루의 방향을 햇빛 방향으로 돌리는 것으로 판단된다. Amorphophallus paeoniifolius를 실내 조경 식물 또는 식 약용의 소재식물로 활용하기 위해서는 꽃의 생장주기 등 추가적인 모니터링과 연구가 필요하다.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.135-145
• /
• 2022

This paper presented a method to build a predictable smart ammunition logistics system using the 4th industrial technology for ammunition logistics, which is the core functions in the field of defense and logistics. We have analyzed the current level of ammunition logistics with various perspectives such as domestic and overseas logistics policies, technology trends, ammunition logistics characteristics, the smart logistics certification measures by Ministry of Land, Infrastructure and Transport. As a result it is considered that the current ammunition logistics needs needs improvement. To improve this, we presented a direction based on the implications derived after analyzing various ongoing programs such as wired/wireless-based automation, smart ammunition depots, and logistics innovation of the army, navy, and air force that can be applied to the ammunition logistics. In order to implement a data-based smart ammunition logistics management system that can achieve innovation and efficiency of total life cycle while meeting changes in the battlefield environment, we presented 4 objectives such as "automation and modernization of field work", "3D-based storage management & improvement of issuing at war," and "data management for prediction-oriented ammunition management". it is expected that there will be benefits such as improvement of operational continuity, guarantee of ammunition reliability, budget reduction, improvement of inefficiencies such as delay, waiting, and double work, and reduction of accidents.

• Journal of radiological science and technology
• /
• v.29 no.4
• /
• pp.241-247
• /
• 2006

Recently, interests and utilization on Computed Radiography(CR) and Digital Radiography(DR) tends to increase owing to an introduction of Picture Archiving and Communication System(PACS) and an accuracy control of special medical equipment for a breast imaging examination. This study was intended to compare and analyze a detector's imaging quality by each system to be used for the breast imaging examination by using ACR Phantom used at the accuracy control. As an evaluation method, a significance and reliability of image's value using the ACR Phantom was analyzed by using SPSS program. The results are followed. 1. For the fiber, there was 3.9 score in Screen-Film, 4.2 score in CR($50{\mu}m$), 3.2 score in CR($100{\mu}m$), and 4.2 score in DR. There was the high score in the order of CR($50{\mu}m$), DR, Screen-Film, and CR($100{\mu}m$)(P<0.05). 2. For the calcification, there was 2.7 score in Screen-Film, 2.5 score in CR($50{\mu}m$), 2.0 score in CR($100{\mu}m$), and 2.9 score in DR. There was the high score in the order of DR, Screen-Film, CR($50{\mu}m$), and CR($100{\mu}m$).(0.025(P<0.05). 3. For Mass, there was 3.8 score in Screen-Film, 3.8 score in CR($50{\mu}m$), 3.6 score in CR($100{\mu}m$), and 4.5 score in DR. There was the high score in the order of DR, CR($50{\mu}m$), Screen-Film, and CR($100{\mu}m$) (P<0.1). 4. As the total score, there was 10.4 score in Screen-Film, 10.6 score in CR($50{\mu}m$), 8.7 score in CR($100{\mu}m$), and 11.3 score in DR. There was the high score in the order of DR, $CR(50{\mu}m$), Screen-Film, and $CR(100{\mu}m$). As shown in the above results, it can be known that DR and Screen-Film System has higher image quality than CR. But, DR has unstability caused by element, and Screen-Film has the low image quality caused by artifact as disadvantages. When Dual-Side CR($50{\mu}m$) was used among CR systems which had the problem of low image quality, it was indicated that there was no difference with Screen-Film System. Because the radiation imaging examination tends to become digitalized, each system for the breast imaging examination will need to be developed and supplemented.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.50-57
• /
• 2006

Development of structures such as slope and tunnel, waste disposal, oil and LPG storages, and underground power house and so on, is increasing with the year. The method for appropriate estimation of rock state such as fresh or damaged rocks is also requested with increasing structural development. On these purposes, seismic logging system, which is a simple and easy way for handling as well as small and light, has been developed. Seismic logging method is one of logging tests, which is able to evaluate the state of rock mass with various shapes and is possible to obtain the relatively accuracy data at situ state. In addition, seismic logging method is at to apply to estimate structural behavior, before and after support installed. According to the results obtained from this study, firstly, it is clear that the extent of damage in rock slope due to blasting is able to be evaluated with quantity using seismic logging method, moreover to decide the damage zone in rock slope reasonably. Secondly, it is expected that installing depth of support is able to be decided more effectively and economically, using the results of seismic logging data. Finally, seismic logging method is also able to be applied safety supervision of structures, before and after support installed.

• Journal of Korea Multimedia Society
• /
• v.15 no.5
• /
• pp.651-663
• /
• 2012

Networked digital signage downloads necessary multimedia contents from a large-sized storage on WAN to its local disk of a limited size before starting their playback. If the required time to download the entire contents gets longer, a start time to play the contents at the digital signage could be delayed. In this paper, we propose a hybrid storage architecture that not only inserts an iSCSI storage layer between the existing local disk and the WAN storage, but offers a contents caching scheme in order to obtain all the necessary contents in digital signage rapidly. The proposed caching scheme determines how to place the downloaded contents both in the local disk and the iSCSI storage. Uniquely, the proposed caching scheme manages the iSCSI storage space by dividing it into two regions: (1) in one region, the digital signage can play the contents directly without downloading them into the local disk; (2) in the other region, the digital signage cannot. Performance evaluations on a simulator and an actual system with workloads of various contents show that a contents-downloading time of the hybrid storage architecture is at maximum three times shorter than that of the existing storage architecture.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11c
• /
• pp.1871-1874
• /
• 2002

최근 인터넷 환경에서 지리 정보 서비스를 제공받으려는 사용자들의 지속적인 증가로 인해 저비용의 여러 개의 단일 노드를 고속의 네트워크로 연결하여 고성능을 제공하는 클러스터 기반의 공간 데이터베이스에 대한 연구가 활발하게 진행되고 있다. 이러한 공간 데이터베이스 클러스터에서 사용자가 요구한 공간 질의를 빠르게 처리하기 위해서는 고비용의 공간 조인 연산을 효율적으로 처리하기 위한 기법이 요구된다. 본 논문에서는 비공유 공간 데이터베이스 클러스터 환경하에서 공간 조인 연산 수행 시 효율적인 병렬 처리를 위한 영역 분할 기법 및 병렬 공간 조인 기법을 제안한다. 기존의 병렬 공간 데이터베이스 시스템에서의 분할 기반 병렬 공간 조인 기법들은 병렬로 수행할 작업 분배 및 할당과 분할 경계선 상에 존재하는 공간 객체들에 대한 중복 조인 연산 및 중복 결과 제거 등의 추가적인 연산을 해야 한다는 문제점들이 있다. 제안된 기법은 공간 릴레이션들을 일정 영역들로 분할하여 비공유 공간 데이터베이스 클러스터의 각 노드에서 중복없이 저장, 관리하도록 하며 분할 영역의 경계선 상에 위치하는 공간 데이터에 대해서만 중복 저장을 허용하여 병렬 공간 조인 연산 시 누락되는 공간 데이터가 없도록 한다. 본 기법은 공간 조인 연산 시 병렬 처리를 위한 별도의 작업 할당 과정을 거치지 않고 각 노드에서 병렬적으로 공간 조인 연산을 수행하며, 분할 경계선 상에 존재하는 공간 객체들은 여과 과정을 거쳐 한번만 공간 조인이 수행되므로 중복 결과들을 제거하기 위한 별도의 연산이 필요없는 특징을 갖는다. Ad Hoc망의 위상변화에 대한 적응성을 높일 수 있도록 한다. SQL Server 2000 그리고 LSF를 이용하였다. 그리고 구현 환경과 구성요소에 대한 수행 화면을 보였다.ool)을 사용하더라도 단순 다중 쓰레드 모델보다 더 많은 수의 클라이언트를 수용할 수 있는 장점이 있다. 이러한 결과를 바탕으로 본 연구팀에서 수행중인 MoIM-Messge서버의 네트워크 모듈로 다중 쓰레드 소켓폴링 모델을 적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.78-87
• /
• 2013

NAND flash memory has been widely used as a storage medium in mobile devices, PCs, and workstations due to its advantages such as low power consumption, high performance, and random accessability compared to a hard disk drive. However, NAND flash cannot support in-place update so that it is mandatory to erase the entire block before overwriting the corresponding page. In order to overcome this drawback, flash storages need a software support, named Flash Translation Layer. However, as the high performance mass NAND flash memory is getting widely used, the size of mapping tables is increasing more than the limited DRAM size. In this paper, we propose an adaptive mapping information caching algorithm based on page mapping to solve this DRAM space shortage problem. Our algorithm uses a mapping information caching scheme which minimize the flash memory access frequency based on the analysis of several workloads. The experimental results show that the proposed algorithm can increase the performance by up to 70% comparing with the previous mapping information caching algorithm.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.12
• /
• pp.543-548
• /
• 2015

Recently top-k query processing has been extremely important along with the explosion of data produced by a variety of applications. Top-k queries return the best k results ordered by a user-provided monotone scoring function. As cloud computing service has been getting more popular than ever, a hot attention has been paid to cloud-based data outsourcing in which clients' data are stored and managed by the cloud. The cloud-based data outsourcing, though, exposes a critical secuity concern of sensitive data, resulting in the misuse of unauthorized users. Hence it is essential to encrypt sensitive data before outsourcing the data to the cloud. However, there has been little attention to efficient top-k processing on the encrypted cloud data. In this paper we propose a novel top-k processing algorithm that can efficiently process a large amount of encrypted data in the cloud. The main idea of the algorithm is to prune unpromising intermediate results at the early phase without decrypting the encrypted data by leveraging an order-preserving encrypted technique. Experiment results show that the proposed top-k processing algorithm significantly reduces the overhead of client systems from 10X to 10000X.