• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1885-1894
• /
• 2014

There are various high-performance algorithms in the area of the existing VDSs (vehicle detection systems). However, they requires a large amount of computational time-complexity and their systems generally are very expensive and consumes high-power. This paper proposes real-time traffic information detection algorithm that can be applied to low-cost, low-power, and open development platform such as Android. This algorithm uses a vehicle's sub-shadow to set ROI(region of interest) and to count vehicles using a location of the sub-shadow and the vehicle. The proposed algorithm is able to count the vehicles per each roads and each directions separately. The experiment result show that the detection rate for going-up vehicles is 94.1% and that for going-down vehicles is 97.1%. These results are close to or surpasses 95%, the detection rate of commercial loop detectors.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.855-858
• /
• 2001

본 논문에서는 교통 정보 제공 시스템에서 기본적으로 필요로 하는 신뢰성 있는 교통데이터 획득을 위한 교통 영상검지기를 ASIC을 이용하여 효과적으로 구현할 수 있는 구조를 제안한다. 본 논문의 교통 영상검지기에서는 먼저 저가의 CMOS 이미지 센서를 이용하여 영상을 획득한다. 그 다음에 영상을 여러 개의 블록으로 분할하고 블록 매칭 기법을 이용하여 각 블록의 모션 벡터, 즉 각 블록이 다음 프레임에서 어느 방향으로 얼마만큼의 거리를 이동했는지를 추적한다. 그 다음에는 블록들의 모션 벡터로부터 자동차의 속도와 크기를 추출한다. 본 논문의 교통 검지기는 실시간으로 시내 도로나 고속도로에서 실시간으로 교통 정보를 검지할 수 있을 뿐만 아니라 보정이 필요 없어 설치가 매우 간편하다.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.59-67
• /
• 2009

With the development of high-cost vehicle detectors, low-cost detectors have also been studied due to the advantage that more detectors are provided within limited budgets. This study proposed a method to estimate vehicle speeds using vehicles' track data from auto manufacturers and time stamps obtained when vehicles' tires pass an inclined sensor (here, a tape switch sensor). In speed estimation, small vehicles and large vehicles is distinguished according to the ratio of time stamps for a wheelbase and a rear track obtained from a tape switch sensor. In particular, speed estimation can be adjusted through a parameter to determine vehicles' size so as to take into account location properties such as vehicles' classification ratio. The low-cost vehicle detector with an inclined sensor proposed in this study is expected to be widely utilized to monitor traffic conditions thanks to low cost.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.99-104
• /
• 2010

We introduce Internet TCP/IP control system to monitor the traffic volume on the traffic network system. To check the traffic volume on traffic road, we use the traffic detector system shppe of circle or diamond or rectangular. Nevertheless we use traffic detector, we will use internet addressin TCP/IP system. If we use TCP/IP control system, we acquire many good point, we achive high sircurity and low costness traffic monitoring system coming difficulty and high level position. But internet system is very easy and low cost direction. Traffic control system is very more depending on the high techinquesion and very complexity. Therefore we introducing TCP/IP internet addressing control system schemetic point.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.177-180
• /
• 2003

텔레비젼 카메라, 비디콘 카메라(vidicon camera), 디지털 검지기, 스캐너 등 물리적 장치로 획득한 영상은 주위의 밝기로 인하여 어두운 영상을 얻거나 영상장치의 물리적 속성과 영상 전송에 기인하여 영상은 열악한 대비를 가질 수 있다. 본 논문에서는 획득한 저대비 영상을 대비 향상시켜주는 기법을 제안한다. 제안된 기법은 K-means 알고리듬을 사용하여 교차점을 자동으로 선정하는 방법을 사용한다. 이 최적의 교차점을 선정하는 과정은 획득한 영상을 물체와 배경으로 분리하는 두 개의 클래스 문제로 보고 K-means 알고리듬을 적용하였다. 구한 교차점을 사용하여 영상을 양분하여 히스토그램 평활화 방법을 적용하였다. 본 논문에서는 퍼지성 지수(index of fuzziness)를 사용하여 향상의 정도를 측정하였다. 제안된 기법을 저대비 영상에 적용하였으며 그 결과를 히스토그램 평활화 기법의 결과와 비교하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2011

The parking guidance system can increase driver's convenience with detailed parking information service, but it continuously consumes electrical energy with large amount of sensors, displays and control modules. With the increase of the demand for green and sustainable building design, it becomes a meaningful issue for parking guidance system to reduce operating power. This paper presents the preliminary design and estimated results of a parking guidance system which is optimized to reduce the power consumption mainly on detectors and displays. The system design is based on commercial wireless parking detectors, wireless-loop-detector and earth-magnetic-detector. We have performed system architecture design, communication network design, parking information service scenario planning, battery life regulation and at last operating power estimation. With the 7 years of battery replace cycle, the estimated result for power consumption of designed system was 0.33W/slot, which is 13% of the traditional system's estimation result. The estimated annual maintain cost was similar to the traditional ultrasonic sensor based system's. The low power operable designed system can be expected to reduce CO2 emission.

• Journal of Korean Society for Atmospheric Environment
• /
• v.7 no.1
• /
• pp.1-16
• /
• 1991

In this study, sampling and analytical procedures were evaluated for the determination of ambient levels of atmospheric PAH, both in gaseous and particulate phase. The method involves low-volume sampling and Soxhlet extraction of the filters and Tenax absorbent, followed by a clean-up stage using a silica column prior to analysis by reversed-phase HPLC with wavelength programmable fluorescence and UV detection. A total of 18 PAH were identified and quantified, all of which have been of environmental concern. In order to validate the methodology and to ensure compatibility of the results, the analytical method used for the determination of PAH was evaluated with respect to the efficiencies of extraction and clean-up procedure, HPLC separation, and lower limits of detection. In addition, substrate dependency of PAH recovery was investigated for the two types of fiters, i.e. glass fiber and PTFE filters.

• Clean Technology
• /
• v.26 no.3
• /
• pp.221-227
• /
• 2020

When the waste solid fuel (SRF, Bio-SRF) is burnt in a boiler, a problem occurs in the combustion process involving the alkali components (Na, K) contained in large amounts in the fuel. The alkaline component has a low melting point, which usually forms low melting point salt in the temperature of the furnace, with the resulting low melting point salts attaching to the heat pipe to form a clinker. Various additives are used to suppress clinker generation, and the additive based on the kaolinite has alkali-aluminum-silica to inhibit the clinker. In this study, the reactivity of the additives based on the kaolinite was compared. The additives utilized were R-kaolinite, B-kaolinite, and A-kaolinite. Also silica and MgO were sourced as the comparison group. The experimental group was employed as a laboratory-scale batch horizontal reactor. The additive and alkaline salts were reacted at a weight ratio of 1 : 1, and the reaction temperature was performed at 900 ℃ for 10 hours. The first measurement of HCl occurring during the experiment was performed 30 minutes after the detection tube was used, and the process was repeated every hour after the experiment. After the reaction, solid residues were photographed for characterization analysis by means of an optical microscope. The reaction characteristics of the kaolinite were confirmed based on the analysis results.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.531-537
• /
• 2000

The simple microgel electrophoresis of single cells, a 'comet assay', on fruit seeds enabled the rapid identification of irradiated fruits by comparing the intact non-irradiated cells and the damaged cells of irradiated fruits. Grapes and plums were irradiated with 0.1, 0.5, 0.7, 1.0 kGy and strawberries, peaches, apples, and nectarines were irradiated with only 1.0 kGy. Seeds were isolated, crushed, and the suspended cells were embedded in an agarose layer. After lysis of the cells, they were subjected to microgel electrophoresis for 2 minutes, and then stained. The DNA radiation-induced fragmentation of all the fruits stretched and migrated out of the cells forming a tail toward the anode giving the appearance of a comet, while the undamaged cells appeared as intact nuclei without tails. Grape and plum seeds irradiated at 0.5 kGy and higher showed significant increases in tail length. With increasing the irradiation doses, longer extention of the DNA from the nucleus toward the anode was observed. Strawberry, peach, apple, and nectarine seeds irradiated with 1.0 kGy also showed the longer tails than non-irradiated ones. DNA comet assay as a rapid and inexpensive screening technique could be an officially validated method for the detection of irradiated fruits.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.594-598
• /
• 2002

The changes in DNA damage were investigated during storage after irradiation. Kiwi, orange and pear were irradiated at 0.1, 0.3, 0.5, 0.7 and 1.0 kGy and stored for 3 months at 4$^{\circ}C$. The comet assay was applied to the sample seeds alt the beginning of irradiation and at the end of storage. Seeds were isolated and crushed, and the suspended cells were embedded in an agarose layer. After lysis of the cells, they were electrophoresed for 2 min and then stained. DNA fragmentation in seeds caused by irradiation was quantified as tail length and tail moment (tail length $\times$ % DNA in tail) by comet image analyzing system. Immediately after irradiation, the differences in tail length between unirradiated and irradiated fruit seeds were significant (p<0.05) in kiwi, orange and pear seeds. With in-creasing the irradiation doses, statistically significant longer extension of the DNA from the nucleus toward anode was observed. The results represented as tail moment showed similar tendency to those of tail length, but tile latter parameter was more sensitive than the former. Similarly even 3 months after irradiation, all the irradiated fruit seeds significantly showed longer tail length than the unirradiated controls. These results indicate that the comet assay could be one of the simple methods of detecting irradiated fruit seeds. Moreover, the method could detect DNA damage even after 3 months after irradiation.