• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.519-532
• /
• 2017

Studies on ancient ironmaking technologies are primarily based on archaeological surveys and scientific analysis data, and technological systems are examined by comparing the results of restorative experiments. In this study, to examine the ancient iron production technologies such as smelting and smithing in the Jungwon area, a restoration experiment was conducted based on archaeological data, and the iron and slag, etc. produced in the experiment were analyzed. Further, the changes in physicochemical properties due to the smelting of the raw material, specifically, iron ore were determined, and the smithing process, which involves fabrication of ironwares, was analyzed along with the characteristics of each step. In the case of smelting, increasing recovery rates and production of high-quality primary iron material were important for the following processes. For the iron bars produced through the smithing process, it was found that quality improvements made by reducing physical defects such as inclusions or gas holes were more important than the composition of the iron itself. The study also yielded comparative study data for various byproducts, such as smithing slag, which could be utilized in other ironmaking technology studies.

• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.257-264
• /
• 2012

Ancient mirrors are generally made of bronze, and it is very rare to find cases of iron mirrors excavated domestically. In this study, the unidentified ferrous artifact was treated for conservation, and was identified as a mirror. In this process, the sample was taken and analyzed for microstructure, and the manufacturing technology was studied. Analysis involved optical microscope, micro-hardness tester, and SEM-EDS. As the result of analysis, iron mirror structure exist not almost non-metallic inclusions, and partially network cementite was observed. This appears to have been caused by reduced carbon content due to decarburizing the cast iron in the solid state mirror which was created by cast iron. The ledeburite structure of the casting has difficult to cut or polish because has great hardness by high carbon content. Thus, the cast iron mirror was decarburized at a temperature under $850^{\circ}C$ with CO or $CO_2$ blocked, which reduced the hardness of the iron mirror and made it possible to polish the mirror surface. This deformation of structure according to carbon content results from such manufacturing technology.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.3
• /
• pp.161-170
• /
• 2012

To provide domestic values of input parameters in a safety assessment of radioactive waste disposal under domestic deep underground environments, various kinds of experiments have been carried out under KURT (KAERI Underground Research Tunnel) conditions. The input parameters were classified, and some of them were selected for this study by the criteria of importance. The domestic experimental data under KURT environments were given top priority in the data review process. Foreign data under similar conditions to KURT were also gathered. The collected data were arranged and the statistical calculations were processed. The properties and distribution of the data were explained and compared to foreign values in view of their validity. The following parameters were analysed: failure time and early time failure rate of a container, solubility of nuclides, porosity and density of the buffer, and distribution coefficients of nuclides in the geomedia, hydraulic conductivity, diffusion depth of nuclides, groundwater flow rate, fracture aperture, length of internal fracture, and width of faulted rock mass in the host rock.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.1
• /
• pp.3-32
• /
• 2020

With controlling Drones, although it was discussed in the previous study which showed a possibility. Which is personality and property rights of third parties could be violated while operating the drone with a video camera. But It's hard to find out precedents related to drones in Korea. In case of that someone try to control the drone which is equipped with a camera in a yard of neighborhood, the German District Court (Potsdam) considered an operator of drone has little bit of careless to do his duty and admit nonfeasance claim in the owner of the one's property for prevention to repetition of similar situation according to a nonfeasance claim for prevention to Section 1004 (1) sentence 2 of the German Civil Code(BGB). The drone which is equipped with a camera have possibilities to disrupt property and personal rights of the owner. Because a danger in repetition is getting larger regarding the violation of law. Moreover, there is a case that someone shot down the drone which is equipped with a camer. Because it has a risk to interrupt private life and cause some dangerous in our life. The German district court(Riesa) recently have considered that controlling the drone with a camera in private spaces is illegal as a violation of personal life. In addtion to, the action of property owner shot down drone is a legal according to § 228 of the German Civil Code(BGB) which is caleed "Necessity". Although it is difficult to apply to foreign cases directly to Korea, similar cases are likely to be occurred in Korea. The decision of the German District Court showed implications to Korea. As demand for the camera-equipped drone increases in Korea, it is time to discuss specific measures for drone violations.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.121-129
• /
• 2014

This study was carried out to research the locations and comprehensive functions of Chinese unique Banwoldang(half-moon shaped pond) appeared at the traditional Chinese villages. Based on the research, the time of Banwoldang being introduced into Chinese traditional culture could date back to Yuan Dynasty and villages that have Banwoldang mainly distributed in the south of the Yangtze River of China where wealthy and high class have lived. Bamwoldangs were mostly built at the front of the village clan halls for the prosperity of the whole clan, The main reason of Banwoldang construction was to complete Feng Shui functions and its goal from the point of Feng Shui in Chinese ancient villages was replenishing the power of location, including increasing the probability of passing the imperial examination for villagers, multiplying riches, minimizing the fire accident and perfecting the geomantic pattern 'leaning against the hill and facing the water(背山臨水)' of villages. Other functions of Banwoldang were found as the place for the community meeting, fish farming and protection of village from enemy. In this research, the reasons of Banwoldang location and values of its various functions were found. But Banwoldang is disappearing rapidly at the Chinese modern villages because there is no interest in traditional culture. Banwoldang is one of unique elements of Chinese culture that must be preserved, so its meaning and value should be lasted well as the Chinese traditional cultures.

• Journal of Conservation Science
• /
• v.33 no.4
• /
• pp.297-312
• /
• 2017

In the ancient iron-making process, a slag former was often added so that iron and other minerals in the ore could be smoothly separated. However, there are insufficient data for judging whether a slag former was added. Thus, in this study, we conducted a smelting experiment to understand the material characteristics of a steel structure that differed depending on the addition of a slag former. It was found that the steel structure produced in the first experiment had a total Fe content of 39.45-52.94 wt%, which decreased to 34.89-38.92 wt% in the second and third experiments. CaO compounds such as calcite, gehlenite, and hercynite appeared, in addition to iron oxides, after the addition of a slag former. As a result of an assessment of whether a slag former was added by comparing the ratio between the components, it was found that the ratio of $CaO/SiO_2$ was 0.42. From a comparative analysis of $Al_2O_3/SiO_2$ and $CaO/SiO_2$, it was judged that the ratio of $Al_2O_3$ and $SiO_2$ can be utilized as an index to judge similar systems of smelting process (ore, furnace wall, and fuel).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.58-65
• /
• 2015

Compared to pavement of Chinese palace gardens, those of private gardens in south part of the Yangtze River(長江) in China shows variety of patterns. In order to figure out what causes the difference in paving pattern, this article focuses on the traditional Chinese ideologies during the all time. An analysis on 'Classical Gardens of Suzhou', which has been designated as UNESCO World Heritage, was used to determine how ideologies have influence on paving pattern of Classical Gardens. As a result, various Chinese ideologies such as Nature worship, Totemism, Confucianism, Taoism, Buddhism, and Folk Culture were found in paving patterns of the private gardens. Pattern of sun in the Retreat & Reflection Garden(Toisawon) is an example of Nature worship among primitive beliefs of ancient China. Phoenix pattern of the Couple's Retreat Garden(Ouyuan, Liuyuan) reflects Totemistic beliefs. Confucianism is the underlying philosophy of Eight Square pattern, Six Square pattern, and Cross Square pattern. These patterns were mainly used to pave large area and easily found in many gardens. Patterns reflect Taoism are "Wufu holding life" pattern(the Five blessing holding life, 五福捧壽), Flat peach pattern, and Alluding Eight Immortals pattern. Paving patterns related to Buddhism are patterns of 'Eight treasures' and Endless knot pattern appears most frequently since it expresses concept of reincarnation well. Paving patterns shows folk culture and beliefs of the time in China are bat, butterfly, dragonfly, frog, carp, and coin(ingot).

• Conservation Science in Museum
• /
• v.3
• /
• pp.65-69
• /
• 2001

Scientific analysis are carried on gilded ornamental shoes, which have been excavated from tomb No 1. and No 4. in Beopcheon-ri, Wonju dated from Baekje Period. This object is a very important because it provides valuable information on the development of metal-making techniques of that period. Thus, this article illustrates the investigation conducted to reveal how the object was created using what materials and techniques. Instead of the spikes-attached to the bottom plate of the object-that couldn't be sampled, a sample of a decorative rivet showing a similar structure to the spikes-attached to the other parts of the shoes-was prepared for a cross-section examination. Using radiography and microscopes, it was found that the head of a spike was placed and then punched to the gilded plate, so it can be held to the shoes. Under the SEM-EDS, the cross-section of the rivet shows that the gilding layer was applied before the attachment of the rivets. It also shows that the gilding layer is distributed unevenly and there are empty spaces indicating amalgam gilding was employed. This was confirmed as Mercury was detected on the SEM-EDS analysis of the object. The examination of the microstructure of the plate using the SEM-EDS revealed that the object is made of a single copper alloy plate with recrystallized twining and non-metallic white inclusions, which found to be lead in this case.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.65-75
• /
• 2019

The government is promoting recycling of waste resources through the enactment of Fundamental Law on Resource Circulation, the revision of the Wastes Control Act and zero-landfilling of untreated waste through improved processes such as recycling and diversification. As of 2015, the total amount of landfilled waste is 38,308 ton/day in Korea. The amount of landfilled waste from industrial sectors is 23,577 ton/day, accounting for 62 % of total landfilled waste. In the study, we investigated the characteristics of the thermal treatment residue among inorganic wastes and estimated the landfill reduction potential according to the relevant recycling criteria, which can go through recycling paths. As a result, it is estimated that about 5~42 % of the landfilled waste can be reduced in case mandatory recycling and landfill suppression policies such as recycling criteria for thermal processing residues and expansion of recycling obligation targets should be implemented. In order to minimize landfill disposal, it is necessary to expand the diversity of waste recycling type and the usage of recycled products.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.125-133
• /
• 2019

A microscope is the fundamental research and diagnostic apparatus for clinical investigation of signaling transduction, morphological changes and physiological tracking of cells and intact tissues from patients in the biomedical laboratory science. Proper use, care and maintenance of microscope with comprehensive understanding in mechanism are fully requested for reliable image data and accurate interpretation for diagnosis in the clinical laboratory. The standard operating procedure (SOP) for light microscopes includes performance procedure, brief information of all mechanical parts of microscopes with systematic troubleshooting mechanism depending on the laboratory capacity. Maintenance program encompasses cleaning objective, ocular lenses and inner optics; replacement and calibration of light source; XY sample stage management; point spread function (PSF) measurement for confocal laser scanning microscope (CLSM); quality control (QC) program in fluorescent microscopy; and systematic troubleshooting. Laser safety is one of the concern for medical technologists engaged in CLSM laboratory. Laser safety guideline based on the laser classification and risk level, and advisory lab wear for CLSM users are also expatiated in this overview. Since acquired image data presents a wide range of information at the moment of acquisition, well-maintained microscopes with proper microscopic maintenance program are impulsive for its interpretation and diagnosis in the clinical laboratory.