• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.232-237
• /
• 2016

As a possible standardization of wireless local area network (WLAN), IEEE 802.11 LRLP is under discussion in order to support long range and low power (LRLP) communication for internet of things (IoT) including drones and many other IoT devices. In this paper, an efficient adaptive resource unit allocation scheme for uplink multiuser transmission in IEEE 802.11 LRLP networks is proposed. In the proposed scheme, which adopts OFDMA random access based transmission scheme of IEEE 802.11ax, in order to enhance the efficiency of the slotted OFDMA random access, access point (AP) traces the history of the sizes of successfully transmitted uplink data, and adjusts the sizes of resource units for the next uplink multiuser transmission adaptively. Our simulation results corroborate that the proposed scheme significantly improves the system throughput.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1025-1033
• /
• 2011

This paper presents a realization of a peer-to-peer communication system for a UAV navigational monitoring using a commercial HSDPA(High Speed Download Packet Access) mobile communication device. The realized system consists of a communication server, an air data terminal and multiple ground monitoring devices, where the server transfers navigational data from a UAV to multiple monitoring devices in real-time with commercial HSDPA modem. Through ground and flight tests, data were obtained to observe the realized system. Test results show that, depending on communicational environment, about 300msec delay, congestion and packet-loss between air data terminal and ground monitoring devices. Nevertheless, through high-speed long range test on a ground vehicle and altitude test with a UAV flight, the feasibility of a UAV navigational monitoring system was observed.

• Journal of Advanced Navigation Technology
• /
• v.2 no.1
• /
• pp.53-60
• /
• 1998

This paper describes some design concepts and design parameters of RZ-SSB which allows full carrier insertion into the single side band to overcome the severe fading in aeronautical telecommunication, and it is described in ARINC Spec. in the name of AME(AM Equivalent), and the necessary transmission bandwidth of RZ-SSB is similar to that of a aeronautical telecommunication. As an amplitude limiter manage to remove the amplitude fading without degrading the quality of output signal, the receiver acts like the FM demodulators. Using the digital Signal Processing(DSP) techniques in the design of transceiver systems has become a performance enhancement of the signal quality and reliability, and making use of DSP, it's able to design low cost, compact transceiver and reduce its weight. For avionics systems is able to eliminate the inherent disadvantages in RZ-SSB, the results of experimental tests suggest that the adoption of RZ concepts is suitable for aeronautical telecommunication transceiver systems use in HF band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.111-119
• /
• 2010

With the rapid progress of wireless technologies today, mobile terminals with multiple access interfaces are emerging. In recent years, WLAN (Wireless Local Area Networks) has become the premier choice for many homes and enterprises. WiMAX (Worldwide Interoperability for Microwave Access) has also emerged as the wireless standard that aims to deliver data over long distances. Therefore, it is important to explore efficient integration methods for delivering multimedia data between heterogeneous wireless networks. In this paper, we developed the simulation models and environments for the mobile multihomed node that has both WiMAX and WLAN interfaces and can move around in both networks by using mobile IP. In order to verify the developed models, we designed and constructed several simulation scenarios, e.g. movement in WiMAX/WLAN, group mobility, MANET, and nested MIP under the various traffic environments such as oneway or bothway UDP packets, FTP traffic, and voice with SIP protocol. The simulation results show that the developed models are useful for mobility studies in various integrated wireless networks.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.542-553
• /
• 2011

A magnetic cable that can safely deliver high frequency AC electric power in flammable or sensitive workplaces by preventing from arcs and electric shocks is firstly proposed in this paper. Several new magnetic cable structures with magnetic shields, which are composed of such cancel coil, cancel copper plate, and cancel copper pipe, were compactly implemented by considering and analyzing fringe field and thus the parallel leakage flux is drastically reduced. The output power and efficiency of a prototype magnetic cable with 1.5 m length and 5 cm gap were measured as 353.8W and 68%, where the source current and switching frequency were 10 $A_{rms}$ and 20 kHz, respectively. The proposed magnetic cables are fully analyzed and verified by finite-element method (FEM) simulations and experiments. The results are in a good agreement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.240-248
• /
• 2006

In this paper, we consider an OFDM receiver algorithm design for IEEE 802.11a/p system, which targeting large coverage area while keeping the transmission format unchanged. Particularly, taking into account the inter-symbol interference(ISI) and inter-carrier interference(ICI) that can be induced with large RMS delay spread, we employ channel shortening time-domain equalizer(TEQ) and evaluate the receiver performance in terms of SINR and packet error rate(PER). The preamble defined in IEEE802.11a/p is used to estimated the initial equalizer tap coefficients. Primary purpose of the paper is to give an answer to the question, though partially, whether or not 16-QAM constellation can be used in none line of sight environment at the boundary of a large coverage area. To this end, we first analyze the required TEQ parameters for the target channel environment and then perform simulation for PER performance evaluation in a generic frequency selective fading channel with exponential power-delay profile.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.833-837
• /
• 2007

In this study, we have fabricated a gain flattened erbium-doped optical fiber amplifier. Gain flattening filters were realized by the strain-induced long period fiber gratings, which are made of periodically arrayed metal wires. Using the filter of $550{\mu}m$ period, spontaneous emission amplified at C-band wavelength by a 980nm pumping laser was flattened within 1dB of gain ripple. The performance of the simultaneous multi channel amplification was measured using a fabry-perot laser diode. Amplification ratio was above 20dB. This amplifier can be applied to the long distance transmission system based on a wavelength division multiplexing for boosting an attenuated signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.993-999
• /
• 2021

Recently, many studies on VNDN technology have been conducted to graft Named Data Networking (NDN) into VANET as a core network technology. VNDN can use the content name to deliver various infotainment application content data through name-based forwarding. When VNDN is used as a communication technology for infotainment applications in connected vehicles, it is possible to realize data-centric networking technology in which data is the subject of communication. It can overcome the limitations of connected vehicle infotainment application service technology based on the host-centric current Internet, such as security attack/hacking, performance degradation in long-distance data transmission, frequent data cut-off. In this paper, we present the main functions provided by VNDN technology, and systematically analyze and organize the issues necessary to realize infotainment application services for connected vehicles in the VNDN environment. Based on this, it can be utilized as basic information necessary to establish infotainment application requirements in VNDN environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.2
• /
• pp.280-285
• /
• 2021

When VNDN technology is used as a communication technology for infotainment application services of connected vehicles, it is possible to realize data-centric networking technology in which data is the subject of communication.Vehicle security attacks and hacks, performance degradation during long-distance data transmission, and frequent data loss It is possible to innovate the limitations of the current host-oriented Internet-based infotainment application service technology of connected vehicles. The data packet forwarding issue to deliver critical information data that is very sensitive to delay in the VNDN on a push-based basis to RSU (Road Side Unit), etc. is one of the issues to be solved for realizing VNDN-based application services. We comprehensively analyze existing forwarding techniques to support push-based data traffic under the environment, and compare and analyze each technique in terms of performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.239-250
• /
• 2022

LoRa is a physical layer technology designed to secure highly reliable long-range communication with introducing loco parentis tree network and chirp spreading spectrum. Since since a leaf can send message to more than one parents simultaneously with a single transmission in a region, packet delivery ratio increases logarithmically as the number of gateways increases. The delivery ratio, however, dramatically collapses even under loco parentis tree topology due to the limitations of ALOHA-like primitive MAC, . The proposed method is intended to exploit SDMA approach to reuse frequency in an area. With the view, TxPower of each sender for each message in a concurrent transmission is elaborately controlled to survive the collision at different gateway. Thus, the gain from the capture effect improves the capacity of resource-hungry Low Power and Wide Area Networks.