• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.71-76
• /
• 1998

고온플랜트 설비 고온요소의 재질열화 정도를 평가하기 위해서 사용되는 방법 중 입계부식법은 시험절차가 간단하고 실제 플랜트에서의 적용이 용이하여 안전 및 수명진단시에 많이 이용되어 왔다. 본 논문에서는 오랜 기간 고온에서 사용된 고온$\cdot$고압플랜트의 실기 요소에 입계부식법을 적용하여 재질의 고온에서의 장시간 노출에 의한 인성저하로 발생되는 잔여 수명을 평가한 결과를 제시하였다. (중략)

• The Research Journal of the Costume Culture
• /
• v.24 no.1
• /
• pp.13-26
• /
• 2016

The purpose of the present study is to investigate the effect of time remaining to use mileage in the notification message from retailers on consumer responses. A total of 577 consumers participated in experiments involving different notification messages of the time remaining to use mileage. Results showed: 1) a significant difference in mileage benefit perception, positive emotion, negative emotion, attitude toward retailers, and repurchase intention according to the remaining time to use mileages, 2) benefit perception positively affected positive emotion and negatively affected negative emotion; positive emotion positively affected and negative emotion negatively affected attitude toward retailers; and attitude positively affected repurchase intention on retailers, and 3) the remaining time to use mileages moderates the relationship between attitude and repurchase intention. Findings highlighted the importance of timing of the message to notify the consumer as to remaining time to use mileage. In the case of a message indicating long remaining time to use mileage, consumers showed more positive responses toward retailers than did consumers who had a message indicating short remaining time to use mileage. These results can be used as guidelines to select the optimal time to send notification messages of remaining time to use mileage in order to generate positive consumer responses.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.12-24
• /
• 1995

Recently, more researches have been actively performed for the assessment of material degradation and residual-life of elevated temperature plant components, as some of domestic fossil power plants become older than 30 years. In this paper, results of on_site residual life assessment are reported for main steam pipes of Youngwol power station #2 which have operated since 1965. For critical weld locations such as butt welds branch welds, Y_sections and a T-section, replication technique and hardness measurement technique were employed for life_assessment. When cracks were detected by conventional NDT tests, crack growth life was calculated using a computer code. On the other hand, for matrix of pipes, residual life was quantitatively estimated by an analytic method and material degradation was estimated qualitatively using diameter measurement data and grain-boundary etching method. Also, direction in further improvement of on-site life assessment techniques are proposed.

• The Korean Journal of Blood Transfusion
• /
• v.29 no.3
• /
• pp.291-300
• /
• 2018

Background: The use of a functionally closed system for the glycerolization and deglycerolization of red blood cells (RBCs) allows for prolonged post-thaw storage for more than 24 hours. The aim of this study was to assess glycerolization and deglycerolization processing for RBCs using a high glycerol method in the automated, closed system provided by Haemonetics ACP 215. Methods: Thirty-five packed RBCs were glycerolized using the ACP 215 to a final concentration of 40% (wt/vol). The units were either frozen as such (n=30) or excess glycerol was removed (n=5) before freezing. After storage at $-80^{\circ}C$, the units were thawed, deglycerolized and resuspended in SAG-M. The frozen-thawed RBCs were stored at $4^{\circ}C$, and analyzed for their stability and in vitro quality. Results: No prefreeze excess glycerol removal units showed significantly less potassium leakage during post-thaw storage compared to the prefreeze excess glycerol removal units. All measurements of the stability and in vitro quality of thawed RBCs prepared from frozen RBCs without the prefreeze removal of excess glycerol during post-thaw storage at $4^{\circ}C$ for 7 days were acceptable to the American Blood Bank Association's standards and European standards. Conclusion: RBCs frozen without prefreeze removal of excess glycerol and the ACP 215 simplifies cryopreservation procedure and increases the stability of frozen-thawed RBCs. This increases the practical applicability of cryopreserved RBCs in blood transfusion practice.

• Radiation Oncology Journal
• /
• v.5 no.1
• /
• pp.1-11
• /
• 1987

Total 390 mice were irradiated with $2{\times}3cm$ abdominal field and $200{\times}5/wk$ regimen with orthovoltage x-ray machine. All animals were divided into 2 large groups, damage and recovery, and histopathologic changes were analyzed at various total dose level (1,000 cCy-5,000 cCy) and intervals (1 week-15 weeks). Almost acute changes such as decreased mitotic activity, villi shortening and focal erosion of mucosa recovered within 1-2 weeks in 1,000-3,000 cGy irradiated group but mild changes persisted in 4,000 and 5,000 cCy irradiated groups. Chronic delayed changes such as thickening of vessel wall with focal thrombosis, submucosal fibrosis, mucosal atrophy and chronic ulcer were observed from 2-3 week specimens in 4,000 and 5,000 cGy groups, These late changes recovered slightly, as increasing time intervals after irradiation but mild, persistant changes were observed throught all follow up period. These data suggest hat even 4,000 cCy is not completely safe for possible permanent damage and judicious modificiation of total dose, dose rate, fraction size, and field size should be considered for better results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.3
• /
• pp.143-147
• /
• 2005

Monitoring and diagnosis of the operating machines are very important for safety operation and maintenance in the industrial fields. These machines are most rotating machines and the diagnosis of the machines has been researched for long time. We can easily see the faulted signal of the rotating machines from the changes of the signals in frequency. The Linear Predictive Coding(LPC) is introduced for signal analysis in frequency domain. In this paper, we propose fault detection and diagnosis method using the Linear Predictive Coding(LPC) and residual signal energy. We applied our method to the induction motors depending on various status of faulted condition and could obtain good results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1242-1246
• /
• 2010

호우기간 동안 내리는 빗방울의 타격에 의해 흙 입자는 침출수와 함께 이동하여 지표 아래 공극을 막는다. 다져진 지표면은 유출과 토양 유실의 원인이 된다. 발생원으로부터 유실되는 토양을 Polyacrylamide(PAM)과 지표피복재를 이용하여 저감하는 연구를 하였다. PAM은 토양 입자의 결합력을 강화시키고 이탈을 방지하여 토양 유실을 감소시키는데 효과적이다. 이 연구의 목적은 PAM을 덧붙인 볏짚거적, 볏짚거적+톱밥, 볏짚거적+왕겨 등을 이용하여 인공강우 동안 토양 유실을 저감하는 효과를 조사하는 것이다. 실험은 1시간 동안 강우를 모의했으며, 실험 도중에 6~7회 수질 샘플을 채취하였다. 초기유출시간은 총 4차 실험중에 2차를 제외한 나머지에서 볏짚거적+왕겨+PAM이 가장 느리게 유출되었다. SS와 탁도 항목에서 1차 실험을 제외한 나머지 실험에서 볏짚거적+톱밥+PAM이 효과적이었다. 단순히 PAM을 사용하는 것보다 잔여물(residue)을 같이 혼합한 피복재료가 토양 유실과 유출을 저감하는데 더욱 효과적인 것으로 나타났다. 본 연구 결과는 향후 농촌지역에 토양 유실저감에 필요한 자료로 활용할 수 있을 것이라 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.310-317
• /
• 2013

This research has been carried out to evaluate the durability characterization of larch wood used for woody erosion control dam. Wood deterioration and strength properties were analyzed according to installed position and duration. Optical and scanning electron microscope were used for examining wood deterioration, and an universal testing machine was applied for compression and shearing strength. As a result, deposited wood in water was maintained almost similar anatomical and physical properties compare to normal wood, even though it was used for seven years. In non-deposited wood which was installed on the side of the dam, heartwood did not show any significant change during seven years, while sapwood was significantly deteriorated in five years. Also, strength properties of sapwood were significantly decreased according to installed duration whereas, degree of decrease in heartwood were relatively smaller than that in sapwood.

• Journal of Internet Computing and Services
• /
• v.8 no.2
• /
• pp.43-54
• /
• 2007

The effective power consumption is the primary issue in a sensor network which consists of the sensor nodes with limited battery power. So, most of the MAC protocols in sensor networks have been designed with the consideration of energy efficiency. Generally, these protocols make use of the listen and sleep mode periodically. However, this approach inevitably causes a long transmission delay on the data forwarding path, which is mainly resulted from the sleep time of the receiver node. This paper deals with a design of DT-MAC(Data Transmission centric MAC) protocol, with minimizes the data transmission delay while it forces each node to consume its energy efficiently. Thus, a node received a packet converts its remained sleep time to the pseudo_listen time, in which the node is able to transmit a packet. With benefit of the pseudo_listen period, the data transmission delay along with the data forwarding path will be shortened as much as it possible. Therefore, DT-MAC protocol is very suitable to the various applications which require a real time sensing data such as disaster and fire alarm.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.74-82
• /
• 1998

The grain boundary etching method as a technique for assessing degradation of structural materials used at elevated temperature has received much attention since it is simple, inexpensive and easy to apply to real plant components. In this study, the technique is applied to some aged petroleum and chemical plant components such as reactors and drums. As a degradation parameter, intersection number ratio ($N_i/N_o$), is employed. The intersection number ratio ($N_i/N_o$) is defined as the ratio of intersection number ($N_i$) obtained from 5-minute picric acid etched surface to the number ($N_o$) obtained from Nital etched surface. In order to study degradation level, several relationships were measured such as the correlation between shift in ductile brittle transition temperature, $({\Delta}DBTT)_{sp}$ and intersection number ratio, ($N_i/N_o$) and the correlation between the measured ($N_i/N_o$) values and Larson-Miller Parameter values.