• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.41-53
• /
• 2018

In the traditional seismic processing, multiple reflections are treated as noise and therefore they are eliminated during data processing. Recently, however, many studies have begun to consider multiples as signals rather than noise for seismic imaging. Multiple reflections can illuminate an area where primary reflections are not able to cover, thus it is allowed that a smaller number of shots and receivers are used for imaging large areas. In order to verify this, surface-related multiples were used for reverse-time migration (RTM), and then we compared the results with conventional RTM images which are generated from primary reflections. To utilize multiples, we separated multiples from whole seismic data using surface-related multiple elimination (SRME) method. Numerical examples confirmed that the migration using multiples can image wider area than the conventional migration, particularly in the shallow subsurface layers. In addition, the migration of multiples could eliminate the acquisition footprints.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.124-129
• /
• 2007

Recently, the application of the linear machine for industrial field is remarkably increased, especially for the gantry machine, machine tool system and CNC. However a linear meter remains the vibrational characteristic itself therefore, In these application fields, high position control performance is essentially required in both the steady and the transient states. In this paper, the design method for a position control is proposed by using the two-degree-of freedom PID controller. This method has great features for the linear machine drives such as no over-shoot phenomena and single gain tuning strategy. By comparison with conventional PID controller, the improvement of performance of a linear motor control system using two degrees of freedom controller are discussed. Through the simulation results, the usefulness of the proposed algorithm is proved. With the simulation results, it was made clear that the introduction of two degrees of freedom controller designed by the proposed method not only improves the over shoot and starting characteristic of response but also removes the undesirable characteristic variation.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.964-973
• /
• 1998

In this paper we propose a levitation and imbalance compensation controller design methodology of magnetic bearing system. In order to achieve levitation and elimination of unbalance vibartion in some operation speed we use the discrete-time Q-parameterization control. When rotor speed p = 0 there are no rotor unbalance, with frequency equals to the rotational speed. So in order to make levitatiom we choose the Q-parameterization controller free parameter Q such that the controller has poles on the unit circle at z = 1. However, when rotor speed p $\neq$ 0 there exist sinusoidal disturbance forces, with frequency equals to the rotational speed. So in order to achieve asymptotic rejection of these disturbance forces, the Q-parameterization controller free parameter Q is chosen such that the controller has poles on the unit circle at z = $exp^{ipTs}$ for a certain speed of rotation p ( $T_s$ is the sampling period). First, we introduce the experimental setup employed in this research. Second, we give a mathematical model for the magnetic bearing in difference equation form. Third, we explain the proposed discrete-time Q-parameterization controller design methodology. The controller free parameter Q is assumed to be a proper stable transfer function. Fourth, we show that the controller free parameter which satisfies the design objectives can be obtained by simply solving a set of linear equations rather than solving a complicated optimization problem. Finally, several simulation and experimental results are obtained to evaluate the proposed controller. The results obtained show the effectiveness of the proposed controller in eliminating the unbalance vibrations at the design speed of rotation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.506-510
• /
• 2004

A torque transmission system composed of several gears and couplings is flexible. In order to get an exact response of motor, the torsional vibration due to an unexpected change of motor speed must be suppressed. Therefore, it is very important that motor control suppress vibration. Various methods to control it including dual inertia system are proposed. Specially, the method of vibration suppression is that vibration can be suppressed to fee㏈ack the estimated torsion torque via the disturbance observer filter being of normal filter. The suitable Proportional controller and coefficient parameter can be designed using CDM and the torsional vibration also be suppressed, but it has a low degree of adaptability to disturbance. The PID controller can be designed easily, but makes the excessive overshoot and oscillation for system response in the early period. To resolve these problems, simple and practical PID controller with two degree of freedom is proposed recently that it ran improve performance of obeying the reference unconcerned in any disturbance by changing the proportional gain by two degree of freedom parameter. But it has also the defect that parameter a must be changed to obtain the ideal Proportional parameter. On this paper, we design the controller which automatically adjusts parameter u using fuzzy Algorithm to overcome such defects. Also, we compare the proposed method with established one and evaluate them to confirm performance of the designed controller.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.187-192
• /
• 2004

본 논문에서는 시간지연 제어기와 관측기를 사용하여 산업용 로봇을 위한 고속 제어 방법을 설계하였다. 설계된 방법은 로봇의 매개변수 변화나 비선형이 존재하는 상황에서도 강인한 제어성능을 보이게끔 개발되었으며, 실제구현을 하였을 때도 계산량이 적으면서 동시에 구현이 쉬운 방법이다. 평면 2 자유도 스카라 로봇의 적용을 통하여 실험을 하였는데, 그 결과 실제 시스템에 효과적으로 적용될 수 있음 확인하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.1
• /
• pp.9-16
• /
• 2020

The objective of this study is to propose closed-form solutions to the free vibration response of single-degree-of-freedom (SDOF) systems, as part of fundamental research on dynamic systems with Coulomb friction. The motion of a dynamic system with Coulomb friction is described by a nonlinear differential equation, and, due to the variation in the sign of friction force term with the direction of motion, it is difficult to obtain the closed-form solution. To solve this problem, the nonlinear differential equation is directly computed by numerical integration, or an approximated solution is indirectly obtained using a linear differential equation wherein the damping effect due to Coulomb friction is replaced by an equivalent viscous damping term. However, these conventional methods do not provide a closed-form solution from a mathematical point of view. In this regard, closed-form solutions to the free vibration response of SDOF systems with Coulomb friction are derived herein by considering that the sign of the friction force term is reversed in each half-cycle of motion and by expanding it to the entire time history using the power series function. In addition, for a given initial condition, both the number of free vibration half-cycles and the response at the instant when free vibration motion stops are predicted under the condition that the motion of free vibration is stopped when the amplitude of the friction force is higher than that of the restoring force due to stiffness.

• Journal of Navigation and Port Research
• /
• v.35 no.3
• /
• pp.227-233
• /
• 2011

This paper presents the tracking and stabilization problem of a night vision system for marine surveillance. Both a hardware system and software modules are developed to control azimuth and elevation axes independently with compensation for ship motion. A two degree of freedom(2DOF) PID controller is designed and its parameters are tuned using a real-coded genetic algorithm(RCGA). Simulation demonstrates the effectiveness of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1045-1053
• /
• 2009

Precision stages for 6-DOF positioning, actuated by PZT stacks, which are fed back by gap sensors and guided by flexure hinges, have enlarged their application territory in micro/nano manufacturing and measurement area. The precision stages inherently have such limitations as the nonlinearity between input and output in piezoelectric stacks, feedback signal noise in precision capacitive gap sensors and low material damping in precision kinematic linkages of mechanical flexures. To surmount these limitations, the precision stage is modeled with physics-based variables, which are identified by transient response correspondence, and a gain margin calculation algorithm using the Prandtl-Ishlinskii model and describing function is newly developed to assess system performance more precisely than linear controller design schemes. Based on such analyses, a precision positioning controller is designed. Excellent positioning accuracy with rapid settlement accomplished by the controller is shown in step responses of the closed-loop system.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.426-426
• /
• 2006

선박이 천 흘수 및 수로를 운항하는 경우 바닥과 벽면의 영향으로 인해 선체침하 및 비대칭적인 힘이 선체 주위에 발생하여 바닥이나 다른 선박 혹은 수로의 벽에 충돌하는 현상이 발생한다. 특히, 수로가 많은 유럽이나 북미를 운항하는 해운회사와 항해사들은 선박의 충돌을 방지하기 위해서 중요한 문제로 다루고 있다. 따라서, 본 연구에서는 선박의 안전한 항해를 위해 수치해석을 이용하여 선박과 벽면 사이에 발생하는 유체역학적 힘, 즉 Sway force와 Yaw Moment를 정성적으로 추정하고자 하였다. 천 흘수 유동 해석용 프로그램을 작성하였으며, 검증을 위해서 Wigley 선형에 적용하여 h/T별로 계산을 수행하여 시험결과와 비교하였다. 그리고, 벽면효과를 해석 할 수 있는 프로그램을 작성하여 실적선인 원유운반선 2척에 대하여 3가지 파라메터, 즉 선속, 수심 그리고 선박과 벽면 사이 거리의 변화에 따른 다양한 계산을 수행하였다. 계산된 결과는 시험결과 및 기 발표된 수치해석 결과와 비교하였다. 기 발표된 논문에서는 시험결과와 계산결과가 상이한 결론을 보여 주었는데, 그 이유는 수치해석에 있어서 자유표면 문제를 선형화된 자유표면 조건식을 사용한 부분을 가장 큰 이유로 언급하였다. 하지만, 본 연구의 결과는 Sway force와 Yaw Moment가 기 발표된 논문의 시험결과와 정성적으로 일치함을 보여 주었다. 본 연구를 통해 수치해석 방법으로 선박에 작용하는 비대칭 유동에 대한 유체역학적인 힘을 정성적으로 추정할 수 있었고, 제한된 수로에서 선박의 조종성 예측 및 수로 설계시 유용한 정보를 제공할 수 있을 것이라고 판단되어 진다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.449-454
• /
• 1994

The Stewart Platform is one example of a motion simulator which generater 6DOF motion in space by six actuators in parallel. The presented control methrol of 6DOF motion simulator is generally classified into two types, one is SISO and the other is MIMO control type. The SISO control can't compensate for external load variation and different dynamic behavior of 6DOF motion, trerefore this type don's control motion precisely. On the other hand, the MIMO control compensates for a interference of 6DOF motion because MIMO controller is designed with 6DOF motion simulator synamics. But MIMO control of motion simulator has a complexity of 6DOF displacement feedback, because in oder to obtain feedback value we must solve the forward kinematics using measurement of cylinder length or design a state estimator, unless measurement of 6DOF displacement is possible. In this paper, a multivariable controller using H .inf. optimal control theory is designed to consider a interference of 6DOF motion and to obtain robust,precise control of system. Also in order to solve the mentioned problem of MIMO control, this paper presents a modified MIMO control model which control 6DOF motion by using feedback of measurement od cylinder length.