• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.611-623
• /
• 2014

The alluvial aquifer, widely developed near the four major rivers such as Nakdong River, can be used effectively for groundwater artificial recharge and is expected to be the future water resources in Korea. This study is aimed at examining the impact of repeatedly injected river water into the riverside alluvial aquifer on injection rate or efficiency in its system at Changweon area. For this, injection tests were performed two times, first on June 19 and second on September 25 through October 9, 2013, and the mixing ratios of river water to groundwater were used as the tool to compare the efficiency of injection. The mixing ratios were evaluated by using electrical conductivities of injected river water (average $EC=303{\mu}S/cm$) and groundwater ($EC{\fallingdotseq}6,000{\mu}S/cm$) measured at 20 m depth of four observation wells installed 10 m apart from each injection well. The result shows the remarkable differences on two respects. First, in some observation well, detection time for incipient injection effect during $2^{nd}$ injection test was shown to be much slower than that of $1^{st}$ injection test. Second, the hourly increasing rate of mixing ratios in $2^{nd}$ test was revealed to be reduced much more than that of $1^{st}$ test. This means that the efficiency of injection was badly deteriorated by only 1,210 minute injection work. Therefore, injection water needs to be adequately treated beforehand and repeated pumping work and/or resting phase is needed afterwards. To a certain extent, the improvement of water quality in saline aquifer was verified in this system by injection tests.

• Resources Recycling
• /
• v.17 no.1
• /
• pp.80-87
• /
• 2008

Cementation and solvent extraction processes were studied to separate nickel and iron ions from the $H_2SO_4$ leaching solution with 47 g/L $Fe(Fe^{2+}/Fe^{3+}=1.03),$, 23.5 g/L Ni and 0.90M $H_2SO_4$ which leached from Fe-Ni alloy. Iron powder was used as a reducing agent for the cementation of Ni ion from the leaching solution. The reduction percentage of Ni ion was $17{\sim}20%$ by adding 4 times stoichiometric amount of iron powder at $60{\sim}80$. This may result from the fact that the cementation of Ni ion occurred after the reduction of $Fe^{3+}$ to $Fe^{2+}$ and the neutralization of $H_2SO_4$ with iron powder. The cementation process was proved to be unfeasible for the separation/recovery of Ni ion from the leaching solution including $Fe^{3+}$ as a major component. $Fe^{2+}$ present in the leaching solution was converted to $Fe^{3+}$ for solvent extraction of Fe ion using D2EHPA in kerosene as a extractant. The oxidation of $Fe^{2+}$ to $Fe^{3+}$ was completed by the addition of 1.2 times stoichiometric amount of 35% $H_2SO_4$. 99.6% $Fe^{3+}$ was extracted from the leaching solution (23.5 g/L $Fe^{3+}$) by 4 stages cross-current extraction using 20 vol.% D2EHPA in kerosene. $NiSO_4$ solution with 98.5% purity was recovered from the $H_2SO_4$ leaching solution of scrapped Fe-Ni alloy.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.43-52
• /
• 2021

In this study, the optimal nitration process for selective lithium leaching from powder of a spent battery cell (LiNi_xCo_yMn_zO₂, LiCoO₂) was studied using Taguchi method. The nitration process is a method of selective lithium leaching that involves converting non-lithium nitric compounds into oxides via nitric acid leaching and roasting. The influence of pretreatment temperature, nitric acid concentration, amount of nitric acid, and roasting temperature were evaluated. The signal-to-noise ratio and analysis of variance of the results were determined using L₁₆(4⁴) orthogonal arrays. The findings indicated that the roasting temperature followed by the nitric acid concentration, pretreatment temperature, and amount of nitric acid used had the greatest impact on the lithium leaching ratio. Following detailed experiments, the optimal conditions were found to be 10 h of pretreatment at 700℃ with 2 ml/g of 10 M nitric acid leaching followed by 10 h of roasting at 275℃. Under these conditions, the overall recovery of lithium exceeded 80%. X-ray diffraction (XRD) analysis of the leaching residue in deionized water after roasting of lithium nitrate and other nitrate compounds was performed. This was done to determine the cause of rapid decrease in lithium leaching rate above a roasting temperature of 400℃. The results confirmed that lithium manganese oxide was formed from lithium nitrate and manganese nitrate at these temperatures, and that it did not leach in deionized water. XRD analysis was also used to confirm the recovery of pure LiNO₃ from the solution that was leached during the nitration process. This was carried out by evaporating and concentrating the leached solution through solid-liquid separation.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.727-736
• /
• 2022

Ice wedges are subsurface ice mass structures that formed mainly by freezing precipitation with airborne dust and surrounding soil particles flowed through the active layer into the cracks growing by repeating thermal contractions in the deeper permafrost layer over time. These ice masses characteristically contain high concentrations of solutes and solids. Because of their unique properties and distribution, the possibility of harnessing ice wedges as an alternative archive for reconstructing paleoclimate and paleoenvironment has been recently suggested despite limited studies. It is imperative to preserve the physicochemical properties of the ice wedge (e.g., solute concentration, mineral particles) without any potential alteration to use it as a proxy for reconstructing the paleo-information. Thawing the ice wedge samples is prerequisite for the assessment of their physicochemical properties, during which the paleo-information could be unintentionally altered by any methodological artifact. This study examined the effect of thawing conditions and procedures on the physicochemical properties of solutes and solid particles in ice wedge samples collected from Cyuie, East Siberia. Four different thawing conditions with varying temperatures (4 and 23℃) and oxygen exposures (oxic and anoxic) for the ice wedge sample treatment were examined. Ice wedge samples thawed at 4℃ under anoxic conditions, wherein biological activity and oxidation were kept to a minimum, were set as the standard thawing conditions to which the effects of temperature and oxygen were compared. The results indicate that temperature and oxygen exposure have negligible effects on the physicochemical characteristics of the solid particles. However, the chemical features of the solution (e.g., pH, electric conductivity, alkalinity, and concentration of major cations and trace elements) at 4℃ under oxic conditions were considerably altered, compared to those measured under the standard thawing conditions. This study shows that the thawing condition of ice wedge samples can affect their chemical features and thereby the geochemical information therein for the reconstruction of the paleoclimate and/or paleoenvironment.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.377-388
• /
• 2022

Laboratory-scale experiments were performed to identify the As removal mechanism of the residual slag generated after the mineral carbonation process. The residual slags were manufactured from the steelmaking slag (blast oxygen furnace slag: BOF) through direct and indirect carbonation process. RDBOF (residual BOF after the direct carbonation) and RIBOF (residual BOF after the indirect carbonation) showed different physicochemical-structural characteristics compared with raw BOF such as chemical-mineralogical properties, the pH level of leachate and forming micropores on the surface of the slag. In batch experiment, 0.1 g of residual slag was added to 10 mL of As-solution (initial concentration: 203.6 mg/L) titrated at various pH levels. The RDBOF showed 99.3% of As removal efficiency at initial pH 1, while it sharply decreased with the increase of initial pH. As the initial pH of solution decreased, the dissolution of carbonate minerals covering the surface was accelerated, increasing the exposed area of Fe-oxide and promoting the adsorption of As-oxyanions on the RDBOF surface. Whereas, the As removal efficiency of RIBOF increased with the increase of initial pH levels, and it reached up to 70% at initial pH 10. Considering the PZC (point of zero charge) of the RIBOF (pH 4.5), it was hardly expected that the electrical adsorption of As-oxyanion on surface of the RIBOF at initial pH of 4-10. Nevertheless it was observed that As-oxyanion was linked to the Fe-oxide on the RIBOF surface by the cation bridge effect of divalent cations such as Ca²⁺, Mn²⁺, and Fe²⁺. The surface of RIBOF became stronger negatively charged, the cation bridge effect was more strictly enforced, and more As can be fixed on the RIBOF surface. However, the Ca-products start to precipitate on the surface at pH 10-11 or higher and they even prevent the surface adsorption of As-oxyanion by Fe-oxide. The TCLP test was performed to evaluate the stability of As fixed on the surface of the residual slag after the batch experiment. Results supported that RDBOF and RIBOF firmly fixed As over the wide pH levels, by considering their As desorption rate of less than 2%. From the results of this study, it was proved that both residual slags can be used as an eco-friendly and low-cost As remover with high As removal efficiency and high stability and they also overcome the pH increase in solution, which is the disadvantage of existing steelmaking slag as an As remover.

• Culinary science and hospitality research
• /
• v.22 no.3
• /
• pp.66-78
• /
• 2016

The purpose of this study was to provide hotel bakery organizations with useful information for human resources management based on a substantial clarification of the relationship and correlation of hotel bakery employees' self-leadership, self-efficacy, and organizational commitment. Resources were gathered from June 20, 2015 to July 10, 2015 by distributing a total of 500 surveys, from which 377 were collected. Excluding 23 survey forms not suitable for the analysis, 354 survyes were processed through factor analysis, reliability test, and multivariant structural analysis using SPSS 18.0 and AMOS 18.0 to verify the hypotheses. The findings of the analysis can be summarized as follows: first, behavior-centered strategies, natural compensation, and constructive thinking strategies had a significantly positive impact on self-efficacy. Second, in the analysis of impact of self-efficacy on organizational commitment, it was significant for emotional immersion, but did not have a significantly positive impact on normative immersion. Third, in the relationship between self-leadership and organizational commitment, behavior-centered strategies and natural compensation did not have a significant impact on emotional immersion. However, constructive thinking strategies had a significant impact. The following implications can be derived based on the above findings: this study implies the possibility of future studies on the variables of self-efficacy as it set behavior-centered strategies, natural compensation, and constructive thinking strategies as the preliminary factors under hotel bakery employees' self-leadership; and it analyzed the causality of each factor with emotional immersion and normative immersion as the subordinate factors of self-efficacy and organizational commitment to show that self-leadership and self-efficacy of hotel bakery employees based on emotional immersion and normative immersion can stably improve the organization of hotel bakeries.

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.650-658
• /
• 2015

The purpose of this study was to determine the effects of dental hygienists' leader-member exchange (LMX) and empowerment on organizational performance, improve human resource management in their organization and their job satisfaction and organizational commitment, and provide basic data that could help improve organizational performance. A survey was conducted in 324 dental hygienists at dental care institutions in Ulsan, Busan, and Daegu from March 2 to 31, 2015 and the following results were obtained: Dental hygienists at dental hospitals had higher levels of LMX than those at dental clinics; those who were at higher positions, who were older, and who were more educated showed higher levels of empowerment. There was significant, positive correlation between LMX and empowerment and job satisfaction and organizational commitment: dental hygienists with better LMX and higher levels of empowerment showed higher levels of job satisfaction and organizational commitment. For dental hygienists, significance (${\beta}=0.325$, p<0.001) exerted the greatest impact on job satisfaction, followed by organizational commitment (${\beta}=0.264$, p<0.001) and competence (${\beta}=0.164$, p<0.01) and LMX (${\beta}=0.321$, p<0.001) had the greatest impact on organizational commitment, followed by job satisfaction (${\beta}=0.275$, p<0.001) and significance (${\beta}=0.210$, p<0.001).To put the results together, dental hygienists in dental care practice had their job satisfaction and organizational commitment affected by LMX and empowerment; therefore, it is necessary to develop diverse education programs with the objective of promoting mutual exchange between a manager of dental hygienists' team and members and improving empowerment.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.445-456
• /
• 2009

Colostrum samples were collected from 36 dairy farms in Gyeonggi-do and one dairy farm in the National Institute of Animal Science (NIAS) for testing. Colostrum samples were analyzed for phisycochemicals (specific gravity, pH, titratable acidity), general components (fat, protein, lactose, total solid, solid non-fat (SNF)), fatty acids, amino acids, minerals, microflora, somatic cells, and Ig (Immunoglobulin). The first colostrum revealed the following data: fat contents were $6.16{\pm}2.39%$, proteins were $14.78{\pm}4.30%$, lactose $2.57{\pm}0.77%$, total solid $24.28{\pm}4.36%$, and SNF $18.12{\pm}4.08%$, whereas the 2nd (or $12^{th}$) colostrum revealed $5.56{\pm}1.76%$ fat, $3.46{\pm}0.41%$ proteins, $4.19{\pm}0.43%$ lactose, $13.90{\pm}1.76%$ total solid, and $8.34{\pm}0.81%$ SNF. Also, the first colostrum revealed the contents of major amino acids as 0.89% aspartic acid, 0.71% threonine, 0.86% serine, 1.75% glutamic acid, 0.64% valine, 0.95% leucine, 0.83% lysine, and 0.95% proline, and those in the 10th colostrum were 0.25% aspartic acid, 0.15% threonine, 0.19% serine, 0.59% glutamic acid, 0.19% valine, 0.35% leucine, 0.31% lysine, and 0.34% proine. Major amino acid contents rapidly decreased as milking times increased. In the first colostrum, the following mineral contents were observed: there were 2,168 ppm in Ca, 1,959 ppm in P, 914 ppm in K, 761 ppm in Na, 287 ppm in Mg, 1.7 ppm in Fe, 14.3 ppm in Zn, and 1.0 ppm in Cu; while in the 10th colostrum, the following ppm contents were 1,389 in Ca, 1,323 in P, 838 in K, 427 in Na, 131 in Mg, 1.0 in Fe, 4.7 in Zn, and 1.3 in Cu. The mineral contents in a colostrum rapidly decreased as milking times increased.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.1
• /
• pp.62-69
• /
• 2008

There has been a recent trend in Korea that treatments for combustible wastes among municipal solid waste (MSW) by those methods, such as incineration and landfill are restricted as much as possible and Mechanical Biological Treatment (MBT) are encouraged actively in order to promote resource recovery. To build and operate properly these facilities, the physicochemical characteristics of MSW should be analyzed precisely beforehand. In particular, designing a crusher or separator properly which is the main process in MBT facilities of MSW. require the information on the size distribution characteristics of MSW, but they are nor sufficient in the qualities and quantities yet as of now. Accordingly, this study aims to evaluate size distribution characteristics of MSW and its physicochemical characteristics by size. The samples of MSW were collected from detached dwelling area, apartment area, business area, and commercial area of A city in Korea. According to the result of analysis, paper records 29.78~60.02% by wet weight basis, so it was the most regardless of the regions where the wastes were generated. And in terms of element analysis, Carbon(C) was 34.77~44.39%, the largest friction, and Oxygen(O) was the next occupying 19.46~33.71%. As indices of RDFs, Chlorine(Cl) was 0.39~0.83%, so it was less than the standard, 2.0%(by dry weight basis); moreover, Sulfur(S) did not exceed the standard, 0.6%, either. In the size distribution of MSW, waste fraction ranging 50~80mm in diameter was the most in combustible waste while 30~50mm was in incombustible waste.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.39-48
• /
• 2010

Recreation forests are in the spotlight as the place for personality development, mind and body comfort, companionship, and environment education in forests and valleys. Visitors to recreation forests have been on the increase along with booming in recreation forest building since 1988. Recreation forests are being categorized according to some features such as regional and environmental condition. Recreation forests, however, have not met the expectations of some visitors who want to take a rest with calmness due to the influence of the 5-day-work-week system, increasing interest in rest, leisure, and well-being, and users converge during weekends, summer, and the tourist season. In order to improve visitors' satisfaction efficiently, this study surveyed the level of satisfaction in each cluster based on the precedent study which had classified 85 national or public recreation forests in Korea into clusters. Questionnaires were distributed properly to each cluster and, of the 1,132 questionnaires collected, 1,015 were valid and used for analysis. Reliability of questionnaires and statistical validity of the model were verified. As a result, there are meaningful differences in the ranking of independent variables which affect the level of satisfaction according to clusters. Variables in rest and fatigue recovery have the strongest influence on the level of satisfaction in the clusters of potential factor, internal activation factor, and mixed potential capacity factor. In the use performance and visiting condition factor cluster, appropriateness of visit cost is most influential and, in the education cluster, connectivity with tourist attractions around it is most affective. These results can provide priority in services and maintenance of recreation forests for improving the level of satisfaction and differentiate the distribution of resources according to clusters.