• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.377-388
• /
• 2022

Laboratory-scale experiments were performed to identify the As removal mechanism of the residual slag generated after the mineral carbonation process. The residual slags were manufactured from the steelmaking slag (blast oxygen furnace slag: BOF) through direct and indirect carbonation process. RDBOF (residual BOF after the direct carbonation) and RIBOF (residual BOF after the indirect carbonation) showed different physicochemical-structural characteristics compared with raw BOF such as chemical-mineralogical properties, the pH level of leachate and forming micropores on the surface of the slag. In batch experiment, 0.1 g of residual slag was added to 10 mL of As-solution (initial concentration: 203.6 mg/L) titrated at various pH levels. The RDBOF showed 99.3% of As removal efficiency at initial pH 1, while it sharply decreased with the increase of initial pH. As the initial pH of solution decreased, the dissolution of carbonate minerals covering the surface was accelerated, increasing the exposed area of Fe-oxide and promoting the adsorption of As-oxyanions on the RDBOF surface. Whereas, the As removal efficiency of RIBOF increased with the increase of initial pH levels, and it reached up to 70% at initial pH 10. Considering the PZC (point of zero charge) of the RIBOF (pH 4.5), it was hardly expected that the electrical adsorption of As-oxyanion on surface of the RIBOF at initial pH of 4-10. Nevertheless it was observed that As-oxyanion was linked to the Fe-oxide on the RIBOF surface by the cation bridge effect of divalent cations such as Ca²⁺, Mn²⁺, and Fe²⁺. The surface of RIBOF became stronger negatively charged, the cation bridge effect was more strictly enforced, and more As can be fixed on the RIBOF surface. However, the Ca-products start to precipitate on the surface at pH 10-11 or higher and they even prevent the surface adsorption of As-oxyanion by Fe-oxide. The TCLP test was performed to evaluate the stability of As fixed on the surface of the residual slag after the batch experiment. Results supported that RDBOF and RIBOF firmly fixed As over the wide pH levels, by considering their As desorption rate of less than 2%. From the results of this study, it was proved that both residual slags can be used as an eco-friendly and low-cost As remover with high As removal efficiency and high stability and they also overcome the pH increase in solution, which is the disadvantage of existing steelmaking slag as an As remover.

• Culinary science and hospitality research
• /
• v.22 no.3
• /
• pp.66-78
• /
• 2016

The purpose of this study was to provide hotel bakery organizations with useful information for human resources management based on a substantial clarification of the relationship and correlation of hotel bakery employees' self-leadership, self-efficacy, and organizational commitment. Resources were gathered from June 20, 2015 to July 10, 2015 by distributing a total of 500 surveys, from which 377 were collected. Excluding 23 survey forms not suitable for the analysis, 354 survyes were processed through factor analysis, reliability test, and multivariant structural analysis using SPSS 18.0 and AMOS 18.0 to verify the hypotheses. The findings of the analysis can be summarized as follows: first, behavior-centered strategies, natural compensation, and constructive thinking strategies had a significantly positive impact on self-efficacy. Second, in the analysis of impact of self-efficacy on organizational commitment, it was significant for emotional immersion, but did not have a significantly positive impact on normative immersion. Third, in the relationship between self-leadership and organizational commitment, behavior-centered strategies and natural compensation did not have a significant impact on emotional immersion. However, constructive thinking strategies had a significant impact. The following implications can be derived based on the above findings: this study implies the possibility of future studies on the variables of self-efficacy as it set behavior-centered strategies, natural compensation, and constructive thinking strategies as the preliminary factors under hotel bakery employees' self-leadership; and it analyzed the causality of each factor with emotional immersion and normative immersion as the subordinate factors of self-efficacy and organizational commitment to show that self-leadership and self-efficacy of hotel bakery employees based on emotional immersion and normative immersion can stably improve the organization of hotel bakeries.

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.650-658
• /
• 2015

The purpose of this study was to determine the effects of dental hygienists' leader-member exchange (LMX) and empowerment on organizational performance, improve human resource management in their organization and their job satisfaction and organizational commitment, and provide basic data that could help improve organizational performance. A survey was conducted in 324 dental hygienists at dental care institutions in Ulsan, Busan, and Daegu from March 2 to 31, 2015 and the following results were obtained: Dental hygienists at dental hospitals had higher levels of LMX than those at dental clinics; those who were at higher positions, who were older, and who were more educated showed higher levels of empowerment. There was significant, positive correlation between LMX and empowerment and job satisfaction and organizational commitment: dental hygienists with better LMX and higher levels of empowerment showed higher levels of job satisfaction and organizational commitment. For dental hygienists, significance (${\beta}=0.325$, p<0.001) exerted the greatest impact on job satisfaction, followed by organizational commitment (${\beta}=0.264$, p<0.001) and competence (${\beta}=0.164$, p<0.01) and LMX (${\beta}=0.321$, p<0.001) had the greatest impact on organizational commitment, followed by job satisfaction (${\beta}=0.275$, p<0.001) and significance (${\beta}=0.210$, p<0.001).To put the results together, dental hygienists in dental care practice had their job satisfaction and organizational commitment affected by LMX and empowerment; therefore, it is necessary to develop diverse education programs with the objective of promoting mutual exchange between a manager of dental hygienists' team and members and improving empowerment.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.445-456
• /
• 2009

Colostrum samples were collected from 36 dairy farms in Gyeonggi-do and one dairy farm in the National Institute of Animal Science (NIAS) for testing. Colostrum samples were analyzed for phisycochemicals (specific gravity, pH, titratable acidity), general components (fat, protein, lactose, total solid, solid non-fat (SNF)), fatty acids, amino acids, minerals, microflora, somatic cells, and Ig (Immunoglobulin). The first colostrum revealed the following data: fat contents were $6.16{\pm}2.39%$, proteins were $14.78{\pm}4.30%$, lactose $2.57{\pm}0.77%$, total solid $24.28{\pm}4.36%$, and SNF $18.12{\pm}4.08%$, whereas the 2nd (or $12^{th}$) colostrum revealed $5.56{\pm}1.76%$ fat, $3.46{\pm}0.41%$ proteins, $4.19{\pm}0.43%$ lactose, $13.90{\pm}1.76%$ total solid, and $8.34{\pm}0.81%$ SNF. Also, the first colostrum revealed the contents of major amino acids as 0.89% aspartic acid, 0.71% threonine, 0.86% serine, 1.75% glutamic acid, 0.64% valine, 0.95% leucine, 0.83% lysine, and 0.95% proline, and those in the 10th colostrum were 0.25% aspartic acid, 0.15% threonine, 0.19% serine, 0.59% glutamic acid, 0.19% valine, 0.35% leucine, 0.31% lysine, and 0.34% proine. Major amino acid contents rapidly decreased as milking times increased. In the first colostrum, the following mineral contents were observed: there were 2,168 ppm in Ca, 1,959 ppm in P, 914 ppm in K, 761 ppm in Na, 287 ppm in Mg, 1.7 ppm in Fe, 14.3 ppm in Zn, and 1.0 ppm in Cu; while in the 10th colostrum, the following ppm contents were 1,389 in Ca, 1,323 in P, 838 in K, 427 in Na, 131 in Mg, 1.0 in Fe, 4.7 in Zn, and 1.3 in Cu. The mineral contents in a colostrum rapidly decreased as milking times increased.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.39-48
• /
• 2010

Recreation forests are in the spotlight as the place for personality development, mind and body comfort, companionship, and environment education in forests and valleys. Visitors to recreation forests have been on the increase along with booming in recreation forest building since 1988. Recreation forests are being categorized according to some features such as regional and environmental condition. Recreation forests, however, have not met the expectations of some visitors who want to take a rest with calmness due to the influence of the 5-day-work-week system, increasing interest in rest, leisure, and well-being, and users converge during weekends, summer, and the tourist season. In order to improve visitors' satisfaction efficiently, this study surveyed the level of satisfaction in each cluster based on the precedent study which had classified 85 national or public recreation forests in Korea into clusters. Questionnaires were distributed properly to each cluster and, of the 1,132 questionnaires collected, 1,015 were valid and used for analysis. Reliability of questionnaires and statistical validity of the model were verified. As a result, there are meaningful differences in the ranking of independent variables which affect the level of satisfaction according to clusters. Variables in rest and fatigue recovery have the strongest influence on the level of satisfaction in the clusters of potential factor, internal activation factor, and mixed potential capacity factor. In the use performance and visiting condition factor cluster, appropriateness of visit cost is most influential and, in the education cluster, connectivity with tourist attractions around it is most affective. These results can provide priority in services and maintenance of recreation forests for improving the level of satisfaction and differentiate the distribution of resources according to clusters.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.24-45
• /
• 2002

For the last several decades, high-resolution shallow marine seismic technique has been used for various resources, engineering and geological surveys. Even though the multichannel method is powerful to image subsurface structures, single channel analog survey has been more frequently employed in shallow water exploration, because it is more expedient and economical. To improve the quality of the high-resolution seismic data economically, we acquired digital seismic data using a small air gun, 6 channel streamer and PC-based system, performed data processing and produced high-resolution seismic sections. For many years, such test acquisitions were performed with other studies which have different purposes in the area of off Pohang, Yellow Sea and Gyeonggi-bay. Basic data processing was applied to the acquired data and the processing sequence included gain recovery, deconvolution, filtering, normal moveout, static corrections, CMP gathering and stacking. Examples of digitally processed sections were shown and compared with analog sections. Digital seismic sections have a much higher resolution after data processing. The results of acquisition and processing show that the high-resolution shallow marine seismic surveys using a small air gun, 6 channel streamer and PC-based system may be an effective way to image shallow subsurface structures precisely.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.808-817
• /
• 2013

This study was conducted to compare job satisfaction and factors related to job satisfaction between permanently and temporarily employed dietitians in school foodservices in the Gyeongsangnam-do area. A total of 204 questionnaires were used in the final analysis. The average age, length of employment, and monthly wage of temporarily employed dietitians was significantly lower than those of permanently employed dietitians. However, there was no significant difference of overall job satisfaction between permanently and temporarily employed dietitians, although the average pay, welfare benefits, and promotion factors for permanently employed dietitians was significantly higher. Work and pay factors had significant effects on the overall job satisfaction of permanently employed dietitians, while work factors and work atmosphere had significant effects on the overall job satisfaction of temporarily employed dietitians. In conclusion, there was a significant difference in overall factors related to job satisfaction between permanently employed dietitian and temporarily employed dietitians. The pay, welfare benefits, and promotion condition of temporarily employed dietitians should be improved to ensure the efficient management of the school foodservice workforce in the future.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2002.05a
• /
• pp.17-22
• /
• 2002

지구상에는 수천종의 버섯류가 자생하고 있어 유전자원으로서의 중요성이 지대할 뿐만 아니라 기능성 식품소재 및 각종 약리 활성을 나타내는 신약개발 소재로도 크게 주목을 받고 있다. 이들 버섯은 균사체의 영양대사로 얻어지는 대사산물이 축적된 자실체의 형태로 나타나는데, 최근에 와서 자실체 및 균사체의 추출물이나 균사체 배양물이 체질개선이나 각종 병의 예방과 치료에 효과가 있는 것으로 밝혀져 건강식품이나 의약품으로서의 용도가 크게 증가하고 있는 실정이다. 특히, 담자균이 생산하는 특정 구조를 갖는 다당류는 오래전부터 종래의 화학요법제와는 달리 숙주내의 면역 기능을 부활하여 소위 면역요법제로서의 항암효과를 나타냄이 알려져왔었다. 현재까지 제약 및 의학적인 방법이 질병의 주된 치료방법으로 이용되어 왔지만 최근에 특정식품의 섭취가 만성질환의 발생을 억제 또는 지연시킨다는 연구 보고가 나오면서부터 만성질환의 치료방법으로서 식이요법을 중요하게 생각하게 되었다. 따라서 새로운 식품소재 및 가공식품의 개발을 통한 성인병 등의 각종 질병예방이 국민보건문제 해결에 필수적이다. 현재 일본 등에서는 표고버섯, 구름버섯 및 치마버섯 유래의 다당체 또는 단백다당체인 lentinan, krestin 또는 PS-K, schizophyllan 및 PSP 등이 실용화되어 높은 가격에 판매되고 있다. 국내에서도 야생 구름버섯 자실체로부터 추출한 단백 다당체인 Copolang(광동제약)이 개발되어 PS-K와 유사하게 암의 치료에 병행 사용되고 있고, 또 강력한 항암활성이 보고된 상황버섯의 균사체 추출물인 단백 다당체가 Mesima-Ex FK(한국신약)라는 상품명으로 암의 치료에 병행 사용되고 있는 것으로 알려지고 있다. 담자균류와 아울러 미생물 유래 다당체는 그 구조와 특성에 있어서 매우 다양함을 지니고 있다. 이러한 미생물 유래 다당류의 공업적 생산과 이용에 대한 연구로서는 Leuconostoc mesenteroides가 생산하는 dextran이 혈장증량제로 개발된 이래 Xanthomonas campestris가 생산하는 pullulan, Zoogloea rgmigera가 생산하는zooglan둥이 대표적인 예로 보고되고 있다. 한편, 미생물 유래 다당류는 구성당, 분자량, 화학적 구조 등과 같은 특성의 차이에 의해 많은 종류가 존재하고 있으며, 다양한 물성 및 유화제, 응고제, gel 형성제, 필름 형성제, 흡착제, 안정제, 접착제 등과 같은 용도로 광범위하게 이용되고 있다. 또한 근래에 들어서는 미생물 유래 다당체가 지니는 항암활성이 확인되어 새로운 의약품으로서의 개발 가능성이 기대된다. 그 밖에도 기존에 알려져 있는 식물 및 해조류 유래의 다당체와는 달리, 발효조를 이용한 연속배양에 의해 공업적 대량 생산이 가능하며, 더욱이 생산된 다당체의 분리 및 회수가 용이하다는 이점을 지니고 있다. 최근에 들어서는 유전공학적 기법을이용한 고생산성 변이균주 및 새로운 기능을 지닌 다당체의 개발에 관한 연구가 보고되고 있는 등 고부가가치를 지닌 새로운 바이오 소재로서의 기능 및 용도 개발에 관한 연구가 활발히 진행되고 있다. 이러한 항암 활성을 나타내는 여러 가지 담자균류중 Agaricus blazei로부터 생산되는 다당체는 고형암 이외에 S형 결장암, 난소암, 유방암, 폐암, 간암 등에 효과가 입증되었고, 천연물질에 의한 암 면역요법으로 각광을 받고 있으며, 항암 및 항virus의 완치율과 저지율에서 현재 여러가지 약효가 있는 버섯중에서도 탁원한 효과가 있는 것으로 증명되고 있다. 이들 다당체는 사이토카인을 생산시켜서 T임파구와 B임파구의 항원 특이적인 면역반응을 활성화시키고, 세포장해성 T세포와 활성화 대식세포의 세포장해 기능을 충진시켜서 암세포를 파괴시킨다. 또한 콜로니 자극인자인 사이토카인을 생산시켜서 면역담당세포의 신생을 촉진시키기도 하며, 암의 화학요법과 방사선 요법으로 저하된 백혈구를 회복시키는 역할을 한다. 따라서 최근의 연구동향은 생산된 다당체의 항암활성을 향상시키고자 하여 배양기간중에 interleukin을 의도적으로 첨가하는 경향이 있다. 이러한 항암 활성을 나타내는 담자균체 유래 다당체는 버섯의 기원에 따라 그 형태에 약간의 차이를 나타내기는 하나 그 기본 형태는 ${\beta}-(1,6)-glucosyl$ 분지를 가진 ${\beta}-(1,3)-glucan$이며, 평균 분자량은 50 ${\sim}$ 200만 정도이다. Agaricus blazei의 원산지인 브라질의 피에다데(Piedade) 지방의 환경조건(산지의 습도는 80%, 낮 기온 $35^{\circ)C$, 밤 기온 $20{\sim}25^{\circ}C$로 대단히 높으며, 정기적으로 열대지방 특유의 소나기가 내리는 지역)에서 볼 수 있듯이 Agaricus blazei의 성장 환경은 매우 까다로운 편이며, 날것으로는 보관이 잘 안되기 때문에 그 재배에 큰 어려움이 있다. 또한, 고체배양에 의해 생산된 버섯 자실체로부터 유기용매 및 열수추출 방법으로 다당체를 생산하는 방법은 균일한 형태의 버섯 자실체를 공급받기가 어렵기 때문에 다당체의 생산 수율이 낮고, 많은 노동력이 요구되는 어려움이 있다. 그러나 액체배양에 의한 다당체 생산의 경우는 고체배양에 의한 다당체 생산에 비해 일정한 조건하에서 배양이 가능하다는 장점이 있으며, 항상 균일한 균사체 및 배양액을 얻을 수 있다. 따라서 원하는 유용물질을 쉽게 획득할 수 있는 장점이 있다.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.