• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.962-973
• /
• 2017

Concerns about an air pollution are gradually increasing at home and abroad. The automotive and fuel researchers are trying to reduce emissions and greenhouse gases of vehicles through a research on new engine designs and innovative after-treatment systems using clean fuels (eco-alternative fuel) and fuel quality improvements. In this paper, we stduy the emission characteristics of greenhouse gases on seven vehicles using gasoline, diesel, and LPG by legal test mode in domestic and abroad.(Urban mode, Highway mode, rapidly acceleration and deceleration, using air conditioner, low temperature condition) Regardless of fuels, most of the greenhouse gases tend to show the worst results in cold FTP-75 mode. In the case of A vehicles (2.0 MPI) and B vehicles (2.4 GDI) using a gasoline fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. But G vehicles(LPLi) have different emission characteristics from another vehicles. In the case of A vehicles (2.0 w/o DPF) and B vehicles (2.2 with DPF) using a diesel fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. However, the factor of F vehicles are in order of low temperature condition, using air conditioner, rapidly acceleration and deceleration. In conclusion, it will be an effective method to apply different technologies of emission reduction for each fuel.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.24-32
• /
• 2021

Personal Air Vehicle (PAV), Cargo UAS (Cargo UAS), and existing manned and unmanned aircraft are key vehicles for urban air mobility (UAM), and should demonstrate compatibility for the design of aircraft systems. The safety assessment required by for certification to ensure safety and reliability should be systematically performed throughout the entire cycle from the beginning of the aircraft development process. However, with the increasing complexity of safety critical aviation systems and the application of state-of-the-art systems, conventional experience-based and procedural-based safety evaluation methods make ir difficult to objectively assess safety requirements and system safety. Therefore, Model-Based Safety Assessment (MBSA) using modeling and simulation techniques is actively being studied at domestic and foreign countries to address these problems. In this paper, we propose a Model-Based Safety Evaluation framework utilizing modeling and simulation-based integrated flight simulators. Our case studies on the Traffic Collision Availability System (TCAS) and Wheel Brake System (WBS) confirmed that they are practical for future safety assessments.

• 한국벤처창업학회:학술대회논문집
• /
• 2017.04a
• /
• pp.62-62
• /
• 2017

최근 인공지능 시대 및 제 4차 산업 혁명 시대의 도래로 제품 간, 제품과 서비스 간, 서비스 간 산업이 다양한 형태로 진화 중이며, 이종기술 산업 간의 융 복합화로 새로운 제3의 신산업이 등장하고 있다. 또한 소위 말하는 O2O(Online to Offline)는 이미 운송, 금융(핀테크), 자동차(카테크), 숙박, 음식, 의료(헬스케어테크) 등 많은 산업 분야에 진출, 기존 전통 산업과 충돌, 인허가에 어려움을 겪고 있으며 이러한 O2O는 IOT(사물인터넷)로 급속도로 가속화 되고 있다. 이렇듯 4차 산업 혁명에 따른 신산업의 탄생은 산업의 경계를 붕괴하고 있음에도 산업별로 구분된 제도, 규제, 지원정책 등은 여전히 신산업 창업의 장애가 되고 있다. 이에, 본 연구에서는 국내 벤처특별법, 창업지원법, 1인 창조기업법 내 투자 지원 업종과 미국을 비롯한 해외 창업 관련법 내 창업 지원 제한 업종과의 비교 분석, 몇 가지 중요한 시사점을 도출했다. 먼저, 우리나라가 선진국에 비해 지나치게 투자 제한 업종이 많음을 확인했다. 또한 선진국은 미풍양속을 해치는 업종, 투기적 사업 등 사회통념상 문제가 되는 사행성 업종을 제외하고는 대다수의 업종이 정책 지원 대상이다. 업종과 더불어 투자 행위로 투자 심사를 해 신산업 투자에 매우 탄력적으로 운영할 수 있게 설계되어 있다. 심지어 미국의 경우, 적극적 창업 투자를 위해 업종 및 투자 행위에 대한 심의를 중소기업청이 직접 수행한다. 특히, 우리나라의 중소기업창업투자회사제도는 미국의 중소기업투자회사(SBIC) 제도와 유사한 반면 투자 제한 업종 뿐 아니라 제도 운영 특히, 창업투자회사에 대한 관리 측면에서 매우 큰 차이가 있음을 보여주고 있다. 우리나라 중기청은 간접관리를 하는 반면, 미국은 중기청 내에서 직접 관리를 하고 있다. 따라서 본 연구에서는 우리나라 창업 벤처 투자 제한을 미국을 비롯한 기타 외국의 사례에서와 같이 사회통념상 불가피한 업종과 더불어 투자 행위로 정의하길 제안한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2010

The purpose of this study is to analyze the bumper mounting structure of passenger vehicles at low speed collision. In order to improve the repairability and damageability of the vehicle, the low speed crash tests of RCAR(Research Council for Automobile Repairs) standard(front & rear 15km/h 40% offset crash test) were carried out for analysis of 3 different types of bumper mounting structures. The results of experiments show that the impact energy absorbing ability of bumper stay with rectangular crash box type vehicle which is inserted into the bumper rail was superior to another two different bumper mounting structures that are applied to many passenger vehicles. In this thesis, well designed bumper mounting structure such as rectangular crash box type can enhance the safety of occupants as well as contribute to reduce repair cost at low collision accident by improving repairability and damageability of vehicle.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.231-234
• /
• 2005

수소 기반의 에너지 사회는 중소규모 분산 발전과 연료 전지 자동차에서 시작될 거라는 예측이 지배적이다. 가정용 고분자 연료전지 시스템은 상업화에 가장 가까운 소규모 분산 발전 시스템중의 하나이며, 에너지기술연구위원에서는 가정용 고분자 연료전지에 수소를 공급하기 위한 천연가스 수증기 개질시스템의 개발을 진행해 왔다. 효율 향상과 제작의 용이성, 그리고 소형화에 초점을 맞추어 개발된 prototype-I은 $2.0Nm^3/hr$의 순수 수소 생산 용량을 가지고 있으며, 수증기 개질기와 수성가스 전이 반응기 수중기 생성 장치, 그리고 반응열 공급에 필요한 버너 등을 이중 동심원관에 통합한 형태이다. 수중기 개질과 수성가스 전이 반응을 거쳐 나오는 개질 가스의 조성은 $72.3\%\;H_2,\;4.8\%\;CH_4,\;0.7\%\;CO,\;22.2\%\;CO_2$이며, 이때 S/C 비율은 2.5였다. 고분자 연료 전지 공급 시 요구되는 CO 농도가 10ppm 이하이기 때문에, 본 시스템에는 선택적 산화 반응기를 2단으로 설치하여 CO. 농도를 10ppm 이하로 낮추어주었다. 전체 시스템의 열효율은 LHV 기준으로 $68\%$. Prototype-I의 운전을 통해 설계 개선안을 도출하였으며, 이를 적용해 제작한 prototype-II가 시험 운전 중이다,. 통합된 개질 시스템에서는 각 단위 반응기사이의 열교환을 최적화하여 단위 반응들이 적정 온도 범위에서 일어나도록 유도하는 것이 중요하다. Prototype-II는 수증기 개질 반응기와 WGS 반응기, 수증기 생성 장치 사이의 열교환율을 향상시켜 농도를 $2.5\%$로 감소시키면서 CO의 농도는 $1\%$이하로 유지하였다. 이 결과를 바탕으로 얻어진 메탄 전환율은 $87\%$이고, 열효율은 LHV 기준으로 $75\%$이다. 아울러 개선점을 적용한 선택적 산화 반응기를 제작하였다. 개질 가스와 산소의 혼합을 유도하고, 반응기 온도의 제어를 통해 선택적 산화 반응의 속도와 선택성을 향상시키고자 한다. 시스템의 운전을 통해 메탄 전환율과 열효율의 개선을 진행할 예정이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.473-482
• /
• 2015

Recent development in science and technology has enabled vehicles to be equipped with advanced autonomous functions. ADAS (Advanced Driver Assistance Systems) are examples of such advanced autonomous systems added. Advanced systems have several operational modes and it has been observed that drivers could be unaware of the mode they are in during vehicle operation, which can be a contributing factor of traffic accidents. In this study, possible mode confusions in a simulated environment when vehicles are equipped with an adaptive cruise control system were investigated. The mental model of the system was designed and verified using the formal analysis method. Then, the user interface was designed on the basis of those of the current cruise control systems. A set of human-in-loop experiments was conducted to observe possible mode confusions and redesign the user interface to reduce them. In conclusion, the clarity and transparency of the user interface was proved to be as important as the correctness and compactness of the mental model when reducing mode confusions.

• Environmental and Resource Economics Review
• /
• v.26 no.1
• /
• pp.57-83
• /
• 2017

The Japanese government's attempts to reduce fine particles (PM2.5) emission pollution in Japan have been largely ineffective. This is because PM2.5 in Japan originated from various sources including around half from oversea countries such as China. This prompts the Japanese government to start a new initiative to reduce PM2.5 at its origin by transferring local knowledge on air pollution reduction measures and technologies to China and working closely with the Chinese government. To promote further reduction in PM2.5, bilateral corporation between Japan and China should be extended to include Korea. It is recommended that an international convention should be in place to deal with transboundary air pollutants in East Asia. A successful East Asia corporation to reduce PM2.5 will not only contribute to clean air but also to future sustainable low carbon society in this region.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.810-815
• /
• 2009

In recent years, embedded systems such as cellular phones, Portable Multimedia Player, intelligent appliance, automobile engine control are reshaping the way people live, work, and play. Thereby, applications for embedded systems become increasingly sophisticated and complicated, such embedded computing platforms must use real-time operating systems (RTOSs) with time determinism. These RTOSs must not only provide predictable services but must also be efficient and small in size and it's kernel services should also be deterministic by specifying how long each service call will take to execute. Having this information allows the application developers to better plan their real-time application software so as not to miss the deadline of each task. In this paper, we present the complete generalized algorithm using multi-dimensional methodology to determine the highest priority in the ready list with 2r levels of priorities for an arbitrary integer number of r.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.1
• /
• pp.176-185
• /
• 2017

This paper describes a design of the WAVE antenna system in V2X wireless communication systems for Intelligent Transport Systems. The WAVE standard protocols defined 5.825~5.9GHz frequency range for wireless communications with V2X. In a recent, A study of WAVE communication system it has been studied mainly the base station and the OBU technology in order to improve the communication performance of the communication distance. In this paper, the proposed vehicular WAVE antenna using the EBG structure is to improve performance. The proposed WAVE antenna with EBG shows improvement of return loss and radiation beam pattern. The performance of WAVE communication systems for intelligent transport systems is dependent on the performance of antenna. The proposed vehicular antenna for WAVE communication systems shows improvement of return loss for performance.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.5
• /
• pp.57-66
• /
• 2017

In this paper, we suggest a novel physics-based real-time animation technique for vehicles, and introduce an easy and intuitive animation authoring tool which uses our proposed technique. After a user specifies a trajectory of a virtual car as input, our system produces a more accurate simulation faster than a previous research result. This is achieved by a trajectory splitting method based on directional features and a trajectory library. As a result, the user can create not only a car animation including lane changing and passing, but also a crash animation which is a rarely researched topic. Also, we propose a virtual car structure that approximates a real car's structure for real-time simulation, the resulting animation shows high plausibility such as a small vibration which occurs when the virtual car breaks and a deformation of when a car accident happens.