• Progress in Medical Physics
• /
• v.9 no.3
• /
• pp.143-154
• /
• 1998

The image intensifier is the key component which determines the imaging characteristics in a fluoroscopic imaging system. A system performance program for clinical evaluation of two image intensifiers, that is simple, non-invasive and time effective, was described. Tests were grouped into three headings: x-ray generator, image quality, and collimation. For the x-ray generator, the kVp accuracy and the automatic exposure control operation were compared. Low- and high-contrast resolution measurements, and mesh pattern study belong to the image quality tests and those tests were performed for the video monitor and photospot images. For the collimation, usable field diameter and image distortion of image intensifiers were measured and quantified. The procedures and the results are hoped to be used for the clinical evaluation of system performance and/or acceptance tests for image intensifiers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.397-400
• /
• 2007

Indoor air-conditioning system(IAS) using wireless sensor network serves to reduce the amount of pollution entering the room from outside and also the pollution that is generated indoor. Small-size and lower power wireless sensor node and sensor interface board was designed for indoor air-conditioning system in buildings of offices and industrial establishments. Many sensor nodes forms Ad-hoc network topology using simple forwarding routing to transmit polluting gas concentration data from different rooms to the indoor air-conditioning system. Sensor node analyzes pollution concentration in the each room and air-conditioning system performs to air-distribution and air-inhalation according to room's pollution by regulating the fan of indoor air-conditioning system. To reduce power consumption electrochemical gas sensor was used in the design. Thus the designed system can optimize state of indoor environment. Graphic user interface displays node sate, gas concentration and temperature of each room.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.897-902
• /
• 2011

This study incorporates a welder and a generator as needed while using the generator to be used as a welder is to configure the system. As such, in order to offer an integrated system to prevent the rapid charging process to manage the power state information, system configuration is the most important. Ideally, the random controls the flow of charge is ideal for that. When charging is good as long as possible, less current. However, In this study, the most ideal fusion welder and generator as required by the generator or welder can be used as a system is proposed. Specifically, the damage can be caused by carelessness, so short-circuit protection, overload protection, reverse polarity protection, automatic charging system is all about, including the ability to adjust.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.34-43
• /
• 1999

A high-speed image processor (HIP) is implemented for a high-speed multi-function peripheral. HIP has a binarization architecture with unified data path. It has the pixel-by-pixel pipelined processing to minimize size of the external memory. It performs pre-processing such as shading correction, automatic gain control (AGC), and gamma correction, and also drives external CCD or CIS modules. The pre-processed data can be enlarged or reduced. Various binarizatin algorithms can be processed in the unified archiecture. The embedded binarization algorithms are simple thresholding, high pass filtering, dithering, error diffusion, and thershold modulated error diffusion. These binarization algorithms are unified based on th threshold modulated error diffusion. The data path is designed to share the common functional block of the binarization algorithms. The complexity of the controls and the gate counts is greatly reduced with this novel architecture.

• Information Systems Review
• /
• v.17 no.1
• /
• pp.217-238
• /
• 2015

Much of the process in Social Science Research can be expedited with use of an automation systems that can lead to research efficiency and dramatic improvement of the research process. This study proposes use of a social science research automation system based on the cloud, which generates questionnaires, supports data collection, and intuitively processes statistical analyses of the data collected. The Cloud-based Social Science Research Automation System is developed with GNU/GPL-based open source software. We also integrate R for statistical computing to enable advanced statistical analyses such as PLS structural equation modeling, mediate effect analysis, compare between groups, and complete general statistics. The Cloud-based Social Science Research Automation system developed in this study is expected to play an important role in improving the social science research process and in performing the social science studies efficiently.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.598-609
• /
• 2003

This paper describes a CMOS IF PLL frequency synthesizer. The designed frequency synthesizer can be programmed to operate at various intermediate frequencies using different external LC-tanks. The VCO with automatic amplitude control provides constant output power independent of the Q-factor of the external LC-tank. The designed frequency divider includes an 8/9 or 16/17 dual-modulus prescaler and can be programmed to operate at different frequencies by external serial data for various applications. The designed circuit is fabricated using a 0.35${\mu}{\textrm}{m}$ n-well CMOS process. Measurement results show that the phase noise is 114dBc/Hz@100kHz and the lock time is less than 300$mutextrm{s}$. It consumes 16mW from 3V supply. The die area is 730${\mu}{\textrm}{m}$$\times$950${\mu}{\textrm}{m}$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.602-604
• /
• 2016

In this paper, we propose that it can control the interior lighting, LED and alarm clocks based on Bluetooth. The proposed 'Bluetooth based LED Alarm Lamp'may be an ON / OFF by using a Bluetooth module, by the light sensor and voltage transformers were designed to adjust the ON / OFF and light intensity. Also 7-segment display the clock, it was used a piezo-buzzer that designed to ring an alarm in time. And to decrease the voltage by using the touch sensor can adjust the light brightness. It was also added the ability to align the alarm. This piece (Bluetooth based LED Alarm Lamp) can provide a comfortable environment inside the room of a resident if the environment is dark when voltage is maintained to be ON automatic system. And designed with emphasis being able to improve the quality of sleep due to weak light.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.113-124
• /
• 2005

Purpose : The using of endo-rectal balloon has proposed as optimal method that minimized the motion of prostate and the dose of rectum wall volume for treated prostate cancer patients, so we make the customized rectal balloon device. In this study, we analyzed the efficiency of the Self-customized rectal balloon in the aspects of its reproducibility. Materials and Methods : In 5 patients, for treatment planning, each patient was acquired CT slice images in state of with and without rectal balloon. Also they had CT scanning samely repeated third times in during radiation treatment (IMRT). In each case, we analyzed the deviation of rectal ballon position and verified the isodose distribution of rectum wall at closed prostate. Results : Using the rectal balloon, we minimized the planning target volume (PTV) by decreased the internal motion of prostate and overcome the dose limit of radiation therapy in prostate cancer by increased the gap between the rectum wall and high dose region. Conclusion : The using of rectal balloon, although, was reluctant to treat by patients. View a point of immobilization of prostate internal motion and dose escalation of GTV (gross tumor volume), its using consider large efficients for treated prostate cancer patients.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.913-916
• /
• 2020

In this paper, we propose the development of nitrogen cooling equipment for personalized local area. The proposed equipment consists of a cold air supply module, a body, and nitrogen injection with the following characteristics. First, it automatically controls the amount and time of cold air supply by utilizing information measuring skin temperature with volumetric temperature sensors, so it can have a competitive edge in function by ensuring complete safety. Second, if the distance measuring sensor is applied to the skin for more than a certain distance, it can block the cold air or control the discharge of nitrogen in conjunction with the control GUI to improve the efficiency of higher cooling therapy while providing safe management. Third, by installing a control module that can control the supply of nitrogen, the cost of maintenance can be minimized by minimizing the loss of nitrogen. Experiments at an external testing agency to evaluate the performance of the proposed equipment showed that the accuracy of the temperature sensor was measured in the range of ±3.8%, which is lower than the world's highest level(±5%), with a range of 110℃ to -160℃ similar to the world's highest level. Distance accuracy was measured in the range of ±3.0%, lower than the world's highest level(±5%), and weight accuracy in the range of ±0.1%, lower than the world's highest level(±5%). In addition, emission control was measured in four stages, higher than the world's highest level(stage 1) and nitrogen use was measured at 0.8L/min below the world's highest(6L/min). Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.8
• /
• pp.143-150
• /
• 2019

Playing musical instruments has long been a hobby enjoyed by many, whether amateur or professional. However, a lot of long and arduous practice is required if one wants to acquire the skills of musical artist and truly enjoy the pleasure of playing. This repetitive and tedious practice is often a hindrance to the process of learning a musical instrument, and numerous educators have put a lot of research and effort into making the process easier and more fun for students. In addition, various media practice tools are being developed to keep the students engaged and having fun. The core elements of this content primarily include controlling the speed of backing tracks in accordance with the skill level of students and providing a backing ensemble that enables them to enjoy the fun of playing. This paper studies and compares various MIDI playback techniques capable of controlling speed and pitch in smartphone applications. Modern applications of these techniques are seen in music educational contents, as well as entertainment contents. It also discusses the development and launching of Upbeat, a drum-loop metronome that automatically increases speed by applying different techniques to its respective smartphone operating systems, Android OS and iOS.