• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.309-314
• /
• 2001

The balance of high speed spindle system with high precision rotation like grinding machine is very important. Traditionally, we use trial and error method to balance the spindle. It takes much time. So we are developing the automatic balancing equipment being used in the grinding machine. The balancing head we develop is wireless. It will be used high-speed grinding machine. We use influence coefficient method to control the automatic balancer. Experiments are based on automatic and manual balancing. We perform test of the vibration filter. It helps to remove noise. The filter and experiments with automatic balancing controller show that automatic balancing control can be successfully achieved with the quick response and good stability characteristics.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.245-248
• /
• 2006

게임의 제작에서 최근 중요성이 부각 되고 있는 Quest의 대량 생성을 위한 Quest의 기본적인 공통 요소와 제작된 Quest의 게임 내 레벨 벨런싱을 위하여 감안 하여 할 점을 통하여 Quest의 대량 생산 하고 기본적인 밸런싱을 자동으로 맞출 수 있는 프로그램을 제안한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.48-53
• /
• 2001

In order to increase productivity and efficiency, high-speed rotating machines become popular these days. The high-speed rotating machine is likely to vibrate and cause machine failure even though it has small unbalance. Therefore, a balancing technique is studied in this paper. Off-line balancing methods are inadequate to solve unbalance vibration problem occurring in the field due to flexible rotor effect, faster tool change, and shorter spin-up and down, etc. An active balancing is suggested to allow re-balancing of the entire rotating assembly in the machine when a tool is changed. This paper shows how to identify the dynamics of the system using influence coefficient and suggest an active balancing technique based on influence coefficient method for high-speed spindle system.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.451-452
• /
• 2013

제안된 토폴로지의 특징은 각 모듈에 연결된 모든 DC/DC컨버터 출력이 변압기 1개에 연결하는 구조를 취하고 있다. 이러한 구조는 배터리의 전압 밸런싱용 모든 컨버터가 하나의 고조파 변압기를 통하여 자속을 공유하는 형태를 취함으로 모든 컨버터의 입력 전압이 자동으로 같아지는 전압으로 수렴하게 된다. 특히 본 구조는 직렬로 연결된 여러 개의 배터리 전압을 한 개의 전압검출만으로 추적이 가능하여 BMS 관리를 위한 다수의 전압센서를 제거할 수 있는 특징을 갖고 있다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.415-416
• /
• 2014

FCEV(Fuel Cell Electric Vehicle)는 연료전지를 사용하여 차량 구동용 전동기에 필요한 에너지를 공급한다. 연료전지는 부하에 급격한 변화가 발생하였을 시에 과도특성이 나타나고 자동차에 에너지를 공급하는 속도에 영향을 준다. 그러므로 연료전지의 특성상 FCEV에서 배터리는 연료전지와 함께 사용된다. FCEV 및 전기자동차는 배터리의 대용량화를 위해 일반적으로 배터리 셀을 직/병렬로 모듈화하여 사용하는데, 이때 배터리 모듈의 충전 및 방전이 반복될 경우, 각 배터리 잔존용량의 불균형이 나타난다. 본 논문은 연료전지 전기자동차용 전력변환 장치를 이용하여 배터리 셀을 모듈화하여 모듈 별 밸런싱을 수행하는 시스템의 설계와 제어기법을 제안한다. 각각의 배터리 모듈과 연료전지를 연결하는 컨버터 모듈은 독립적으로 제어되어 배터리를 모듈 단위로 균등화시킨다. 이때 연료전지를 입력으로 절연형 컨버터를 병렬로 사용하며, 각각의 배터리 모듈을 균일하게 충전한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.238-244
• /
• 2017

A spindle with a built-in motor can be used to simplify the structure of a machine tool system, but the rotor inevitably has unbalanced mass. This paper presents an analysis of the dynamic behavior. The spindle was used in a CNC lathe and investigated using the finite element method and transfer matrices. The high-speed spindle can be very sensitive to the rotation of an unbalanced mass, which has a harmful effect on many machine tools. Thus, a balancing procedure was performed with a spindle-bearing system for the CNC lathe by numerical analysis. The balancing was performed through the influence coefficient method, and the whirl orbit radii before and after balancing were compared to evaluate the effects. The results show that the rotational speed of the spindle seriously affects the whirl responses of the spindle. The whirl responses were also affected by other factors, such as the unbalanced mass and bearing stiffness. The balancing of the assembled spindle model significantly reduced the whirl orbit magnitude.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.15-28
• /
• 2009

This paper proposes HWbF(Hit and WLC based Firewall) design which consists of an PFS(Packet Filter Station) and APS(Application Proxy Station). PFS is designed to reduce bottleneck and to prevent the transmission delay of them by distributing packets with PLB(Packet Load Balancing) module, and APS is designed to manage a proxy cash server by using PCSLB(Proxy Cash Server Load Balancing) module and to detect a DoS attack with packet traffic quantity. Therefore, the proposed HWbF in this paper prevents packet transmission delay that was a drawback in an existing Firewall, diminishes bottleneck, and then increases the processing speed of the packet. Also, as HWbF reduce the 50% and 25% of the respective DoS attack error detection rate(TCP) about average value and the fixed critical value to 38% and 17%. with the proposed expression by manipulating the critical value according to the packet traffic quantity, it not only improve the detection of DoS attack traffic but also diminishes the overload of a proxy cash server.

• Journal of the Korea Society for Simulation
• /
• v.19 no.2
• /
• pp.81-89
• /
• 2010

Biological data mining has been noticed as an issue as the volume of biological data is increasing extremely. Grid technology can share and utilize computing data and resources. In this paper, we propose a hybrid system that combines biological data mining with grid technology. Especially, we propose a decision range adjustment algorithm for processing efficiency of biological data mining. We obtain a reliable data mining recognition rate automatically and rapidly through this algorithm. And communication loads and resource allocation are key issues in grid environment because the resources are geographically distributed and interacted with themselves. Therefore, we propose a dynamic load balancing algorithm and apply it to the grid-based biological data mining method. For performance evaluation, we measure average processing time, average communication time, and average resource utilization. Experimental results show that this method provides many advantages in aspects of processing time and cost.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.11
• /
• pp.1214-1221
• /
• 2009

A high-speed spindle can be very sensitive to rotating mass unbalance which has harmful effect on many machine tools. Therefore, the balancing procedure to reduce vibration in rotating system is certainly needed for all high-speed spindles. So, balancing procedure was performed with a spindle-bearing system for CNC automatic lathe by using numerical procedure. The spindle is supported by the angular contact ball bearings and the motor rotor is fixed at the middle of spindle. The spindle-bearing system has been investigated using combined methodologies of finite elements and transfer matrices. The balancing was performed through influence coefficient method and the comparison was made by whirl responses between before balancing and after balancing. As a result, balancing of simple spindle model reduced whirl orbit magnitude in case of a completely assembled spindle model.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.1
• /
• pp.142-151
• /
• 1995

회전체의 자동밸런싱을 위하여 고안된 자기보상 동적균형기는 홈이파인 원판에 강구와 저점성유체를 지닌 구조체이다. 유도된 운동방정식으로 부터 자기보상 동적균형기의 작동조건을 조사하기 우하여 수치해석을 통한 동 특성을 검토하였다. 수치해석의 결과에 근거하여 임계속도보다 높은 범위에서는 자기보상 동적균형기는 정상작동을 보여주었다. 임계속도에서는 회전계의 균형이 강구와 점성유체와의 감쇠계수에 의존하였으나 임계속도보다 낮은 범위에서는 어떠한 조건에 대해서도 작동하지 않음을 알 수 있었다. 자동차 및 항공기에도 응용가은한 자기보상 동적균형기의 작동조건들을 본 논문에서 예시하였다.