• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.2
• /
• pp.58-66
• /
• 2016

We have evaluated the ammonium data in seawater as a potential short-term index for marine environment through the following steps. 1. reviewing of chemical characteristics of ammonium in seawater, 2. comparative relationships of ammonium data with other water quality indices such as DO, COD, and nutrients from Typical Marine Environment(TME) and Special Marine Environment(SME). Ammonium data generally represent negative correlation with DO, while positive correlation with COD. In particular, under frequent cases of seawater conditions showing similar concentration of COD or DO, we have limited choice of explanation for such situation. However ODIN(ODIN/RDIN) or RDIN(RDIN/TDIN) ratio could provide advanced information to understand these seawater conditions. Based on these results, we suggest ammonium data as a potential short-period index for transilient marine environment, such as benthic flux of bottom sediment, hypoxia, and algal bloom. Under overcoming several handicaps, ammonium data could be an useful tool for better understand short transformation of marine environment.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.2
• /
• pp.25-33
• /
• 2013

This study introduces strength characteristics of the anti-washout grouting material using viscous modifiers and its characteristics mixed with coarse materials. Especially, this study focused on the strength characteristics of the grouts mixed with sea water. It is found that the anti-washout grout mixed with sea water has enough strength and good resistance to segregation just like that with fresh water. Also, a small scale test was performed to evaluate the solidification characteristic of the anti-washout grout mixed with coarse fill materials. It is also found that the strength of anti-washout grout mixed with coarse fill materials is greater and better segregation resistance than those of conventional grout with fill materials.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.5
• /
• pp.189-200
• /
• 1996

The permeability of concrete influences the durability of concrete remarkably. The conventional test method for permeability is very difficult to apply to high strength concrete because of its very low permeability. The present study employs a resonable and realistic test method for permeability of concrete and proposes a very low permeability concrete. To this end, comprehensive tests have been conducted and major test variables include the types and amount of cement. the types and amount of admixtures, and the size of aggregates. The present test results indicate t h a t the permeability decrease with the increase of strength and that the concrete with certain mineral admixtures exhibits very low permeability. The permeability of those high performance concrete is about 1/100 of conventional normal concrete. The present study provides a firm base for the use of very low permeable and hence very durable concrete.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.111-120
• /
• 2010

This study evaluated strength properties of recycled asphalt concretes using warm-mix technology. Granite with maximum size of 13mm and penetration grade of 80-100 virgin binder were used for mixing in recycled mixtures. Mix design was performed using 20% and 30% RAP(coarse : fine= 6 : 4) contents. GPC, penetration, absolute viscosity and kinematic viscosity were measured for determining ratio of two warm-mix additives (Evotherm and Sasobit). Low-density polyethylene(LD) used as asphalt modifier for improving stiffness of recycled WMA mixtures in this study. Therefore, a total of 11 mixtures were prepared in this study; 8 warm-mix recycled mixtures(2 RAP contents${\times}$2 warm-mix additives${\times}$2 modifiers), 2 hot-mix recycled mixtures and 1 HMA virgin mixture(control). Deformation strength, indirect tensile strength, moisture sensitivity, permanent deformation by wheel tracking tests were measured out for evaluating fundamental properties of recycled asphalt concretes using warm-mix technology.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.235-242
• /
• 2019

The objective of this study is to modify the mixture proportions of concrete that were developed for section enlargement strengthening elements using a specially designed binder composed of 5% ultra-rapid hardening cement, 10% polymer, and 85% ordinary portland cement in order to assign the self-compaction property to such concrete. The self-compaction abilities of concrete were estimated by the performance criteria specified in JSCE and EFNARC provions. Test results showed that the increase in the unit binder content at the consistent water-to-bider ratio led to increase in viscosity of fresh concrete but did not exhibit the decrease in the fluidity due to a greater viscosity. The mixture proportioning of self-compaction section enlargement concrete could be considered at the following conditions: unit binder contents of $430kg/m^3{\sim}470kg/m^3$ and fine aggregate-to-total aggregate ratios of 40%~46% at the water-to-binder ratio of 38%.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.4
• /
• pp.65-72
• /
• 2004

Within a country, owing to the restriction of aggregate which have been supplied to construction sites, applicability of byproducts such as the copper slag is expected to be more reasonable. In this study, on the basis of characteristics, grain distribution and environmental stability of copper slag, its engineering application was estimated as the vertical and horizontal drainage material. As a results of laboratory tests, it was shown that the permeability of the copper slag was similar to that of sands under vertical drainage condition. In addition, the copper slag showed higher critical hydraulic gradient than that of sand under upward vertical flow state. The copper slag has potential safety against piping and it that the copper slag is suitable for drainage and filter material.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.982-986
• /
• 2008

2000년 남북정상회담 이후 여러 분야에서 남북한경제협력사업이 진행되어 오고 있다. 특히 물 관련 산업분야는 금강산관광, 개성공단, 경의선 및 동해선 철도 도로 연결사업 등과 같은 대규모 사업에 비해 미약하나마 임진강 유역 수해방지를 위한 협력체계가 어느 정도 진행되고 있다. 이 사업은 2000년 8월 29일부터 평양에서 개최된 제2차 남북장관급회담에서 합의되어 2004년 3월에는 남북경제협력추진위원회 제8차 회의에서 임진강 남북 공동 현지조사 등 수해방지 대책수립에 합의하고 동년 4월에는 임진강수해방지 실무협의회 제3차 회의를 통해 현지조사와 관련된 조사항목, 북측에 제공할 조사용 기자재 품목, 북측의 기상 수문 자료 제공 등에 대한 합의가 있었다. 이상과 같이 남북한 공유하천에 대한 협력체계도 타 분야와 마찬가지로 지속적으로 발전하여 보다 효과적인 협력체계 단계로의 진입이 예상되고 생활 공업용수 공급, 하천관리 및 골재개발 등 보다 넓은 영역에서 다양한 협력을 기대할 수 있을 것이다. 본 연구에서는 북한과의 수자원분야 협력사업이 확대될 경우를 대비하여 북한의 수문조사 체계의 일반을 분석하여 제시하고자 하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.403-408
• /
• 2019

In general, the caisson having the perforated wall is used to for the purpose of reducing the wave reflection and wave overtopping. In this study, the hydraulic characteristics (reflection coefficient) of the perforated wall caisson chamber filled with aggregates (rocks) were investigated with hydraulic model tests. When the perforated wall chambers were filled with aggregates, the reflection coefficients would increase. However, it was confirmed that the rock filling method into the perforated wall chamber could secure the stability of the structures and satisfy the hydraulic characteristics at a certain level.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.4
• /
• pp.71-78
• /
• 2007

Schmidt hammer and ultra-sonic method are commonly used for crushed sand concrete compressive strength test in a construction field. At present, various of equations for prediction of strength are present, which have been used in a construction field. The purpose of this study is to evaluate the correlation between prediction strength by presentation equations and destructive strength to test specimen, and find out which is a suitable equation for the construction site. In this study, a strength test was carried out destructive test by means of core sampling and traditional test. The experimental parameter were concrete age, curing condition, and strength level.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.23-28
• /
• 1997

Iron and slag were prepared by melting mixed industrial wastes in an induction furnace. The wastes were steel can, limestone sludge, waste foundry sand, coal fly ash, and glasses. The effects of their mixing ratio on the charactenstics of the meltcd slag were investigated. The wastes were melted to slag under the constant basicity of 1.2. It was found that the major phases of the slag were P-C,S and C,AS and then ratio was determined by the mixing ratio af waste materials. The recovery of iron was about 93-95%. The feasibility of using the slag as the aggregate was confirmed by thc elution and campression tests.