• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.296-300
• /
• 2003

Design of drawing dies used in real industrial environments. It was designed by CAD software in many small & medium companies, but many products require various types, and sizes. Therefore, many companies are required to reduce process time and design mistakes. In this paper, for the automatic design of drawing dies, Design process considered that easy to team and use. which are used with Visual LISP/DCL language in a commercial CAD package, AutoCAD. It has adopted GUI in design system, and has applied DCL language. The system is based on the knowledge base system which is involved a lot of expert's know-how We have built database of design type and detail sizes. The automatic design system requires basic product type and sizes. Then the system accesses to the database and find out sizes by comparing with input parameters and generate drawing dies file.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.82-88
• /
• 2002

Copper bus-bar is made by drawing process and used in many part of industry. Ohen design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper it is analyzed to determine shrink fit value by shrink fit analysis program which is used with APDL/UIDL language in a commercial FEM package, ANSYS. The shrink fit analysis has been developed that enables optimal desist of the dies taking into account the elastic deflections. Elastic deflection is generated in shrink fitting the die inserts and that caused by the stresses generated using DEFORM software for drawing process analysis. This data can be processed as load input data fir a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.60-66
• /
• 2005

Design of drawing dies was used In real industrial environments. It was designed by CAD software in many small & medium companies, but many products require various types, and sizes. There(ore many companies are required to reduce process time and design mistakes. In this paper, it was developed the automatic program in order to learn and use easily for design of the drawing dies. It was composed with Visual LISP/DCL language in a commercial CAD package, AutoCAD, and CUI in design system. The system is based in the knowledge base system which is involved a lot of expert's know-how. We have built database of design type and detail sizes. The automatic design system requires basic product type and sizes, and then the system accesses to the database and finds out sizes by comparing with input parameters, after then finally generates drawing dies file.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.95-98
• /
• 1999

In this study, a method to find the optimal intermediate die geometry for the multi-stage drawing process for the rectangular rod from a round bar is proposed and a program using the proposed method is developed. On the stage of the design of the intermediate die geometry, the virtual die was constructed using the initial billet as a inlet of the drawing die and the final product as a exit of that and the virtual die was divided by the number of pass. Divided die was transformed into the rectangular one which is the intermediate die geometry for the multi-stage rectangular drawing process. In order to verify the application of the proposed method on the real industrial product, the drawing of the rectangular rod from a round which composed two stage has been performed and simulated by the three dimensional rigid plastic finite element method.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.116-122
• /
• 1996

In forming processes, die failure must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. The die wear affects the tolerances of formed parts, metal flow and costs of processes etc. The only way to control these failures is to develop methods which allow prediction of the die wear and which are suited to be used in the design state in order to optimize the process. In this paper, wire drawing processes were simulated using the rigid-plastic finite element method and its results were used for predicting the die wear by Archard's wear model. The effects of the temperature rising on the wear profiles of die were also investigated. The simulation results were compared with the measured die profiles.

• 대한기계학회논문집
• /
• 제16권3호
• /
• pp.453-458
• /
• 1992

본 연구에서는 유한요소법에 바탕을 둔 최적공정설계법을 이용하여 압출 금형 형상의 최적설계를 실시하였다.설계의 결과를 참고문헌에서 발췌한 이론해와 비교 하였으며, 축대칭 압출공정에서 압하율, 마찰, 재료특성 등이 금형의 최적형상에 미치 는 영향에 대하여 조사하였다.

• Design & Manufacturing
• /
• 제16권2호
• /
• pp.60-65
• /
• 2022

In the pultrusion process for the CFRP (Carbon fiber reinforced plastic) rectangular pipe, the drawing device is eseential which can continuously produces products and draws the carbon fiber tow. In addition, since the degree of cure changes depending on the temperature and the temperature ditribution of the curing mold changes depending on the pultrusion speed, the temperature distribution of the curing mold under certain conditions must be studied before processing. In this study, in the pultrusion process using a closed impregnation method, which has several advantages compared to the general pultrusion process using a open bath impregnation method, the drawing force required to pull the carbon fiber tows and the temperature distribution of the curing mold was analyzed to design the drawing device and the curing mold efficiently.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1410-1413
• /
• 2003

Drawing is a basic plastic deformation method and productive manufacturing process make wire. rod and variety section geometry bar. Study for the rod drawing process of rod was researched long littles. but non-axisymmetric drawing process is weak. So metal flow is very irregular in non-axisymmetric drawing process and difficult to define about material deformation generally. In this paper, to solve material deformation, use finite element method and then define suitable shape for rod to hexagonal drawing dies. And research corner filling rate and surface roughness for the high strength steel hexagonal bar produced defined dies.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.78-84
• /
• 2006

The objective of this study is to design the optimal die profile that can prevent material fracture in the tube drawing process for automobile steering input shaft. First, the CDV(Critical Damage Value) of material is obtained by the compression test and FE-analysis. The occurrence of fracture is estimated by the FE-analysis considering the CDV. In order to achieve the objective of this study, optimization technique and FE-analysis are applied. FPS(Flexible Polyhedron Search) method, which is one of the non-gradient optimization techniques often used in engineering, is used to search optimal die profile. The drawing die profile is represented by Bezier-curve to generate all the possible die profile. Using FPS method and FE-analysis the optimal drawing die profile is determined. To verify tile effectiveness of the redesigned optimal die, the tube drawing experiment is performed. In the experimental result, it is possible to produce sound product without material fracture using the redesigned optimal die.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.123-129
• /
• 2018

A rotational drawing die which can form a long tube with spiral grooves on the surface is presented. The main feature of the proposed die is a rotation insert that is embedded into the die container for the die to freely rotate with respect to the drawing centerline as the materials are drawn. We employed a three-dimensional finite element model to investigate the effects of the rotational die on the material filling of spiral grooves. The material used in the finite element analysis was stainless 304. We also performed a pilot drawing test to verify the usefulness of the proposed rotational drawing die. Results reveal that the material filling of spiral grooves by the proposed rotational drawing die was in good agreement for both the finite element analysis and the drawing test. We found that the underfill in a conventional drawing die was reduced in the proposed rotational drawing die.